Best Electrical Battery Testers in 2022

Last update: December 24, 2022

Are electronic battery testers accurate?

Yes, electronic battery testers are accurate. You can trust the results that they give you.

At what voltage is a 12-volt battery no good?

Once a 12-volt battery voltage drops below 10.5 volts, it is considered "dead" and no longer able to start an engine.

Can a multimeter be used as a battery tester?

In short, yes a multimeter can be used as a battery tester. By measuring the voltage of the battery, you can get a good indication of its charge. Most batteries will have a voltage of around 12 volts when fully charged. If the voltage is lower than that, the battery is likely discharged.

Do I need a multimeter or voltage tester?

Multimeters and voltage testers are two different tools used to measure electrical properties. A multimeter is able to measure voltage, current, and resistance, while a voltage tester can only measure voltage. If you only need to measure voltage, then a voltage tester is all you need. However, if you need to measure multiple electrical properties, then you will need a multimeter.


Dlyfull Universal Battery Tester with LCD Display, Multi Purpose Small Battery Checker for AA AAA C D 9V CR2032 CR123A CR2 CRV3 2CR5 CRP2 1.5V/3V Button Cell Batteries (Black) Review:


How incredibly simple to use is this Dlyfull Universal Battery Tester? It was satisfying to finally purge the rubbish drawer of suspect batteries. All of the batteries I possessed, including AA, AAA, C, D, 9V, and button batteries, were all tested (2025 and 2032). My spouse no longer needs to wait until he gets home from work to retrieve the multimeter from his basement workshop. I simply needed to release the pull tab because this tester already had the battery it needs to function. I hope it lasts because I look forward to utilizing this for many years.



4 Pack Battery Tester, Universal Battery Checker for AA/AAA/C/D / 9V / 1.5V Button Cell Batteries Review:


I have gotten batteries for hundreds of dollars less. My home is covered in fairy lights. I primarily use rechargeable batteries, so when a set for a string of lights requires charging, I typically just recharge all three without giving it any thought. Then the batteries would only last for one day before needing to be recharged, and I assumed they must be damaged. WRONG! When I believed a battery was dead, it wasn't, and when I thought it was fully charged, it wasn't. I also have a basic battery-operated human waste can. Because it's daytime, several of the photos are light. Pay attention to what I say! It did not arrive broken because there is no spring motion. I wouldn't have bought these if I had paid attention to the unfavorable reviews. I currently have one in my car, at my workstation, in my bedroom, and YES, one in my camping equipment. I've already saved hundreds of dollars. I held off on publishing my evaluation until I was certain that it functioned. You will share my joy in this, as well. Purchase the four packs, then place one in each location that you believe you might need one. A freshly charged battery is shown in the photo with the charger. Without this charger, I would not have known that a battery that had just been charged was not charged. Just charge it once more; if it won't the second time, the battery is bad. Several of the recently charged defective batteries will charge.



Amprobe BAT-250 Battery Tester Review:


Basically EVERY tester you see in this price range will have the same kinds of positive and poor evaluations, to put it succinctly. You will find "it works" reviews mixed in with the Typical Negative Reaction of "tests all batteries as 'good' regardless" for every single one. With the exception of the "manufacturer" name stamped on the plastic, some of the various models even LOOK TO BE THE SAME ITEM. Simply choose one and hope for the best.I decided on this one (BAT-250) since it seemed to be the only "250" being sold and was advertised as being better than other models because one was reportedly able to "test one handed" or something like. Dice are rolled.Advantages: Appears to test batteries. Yes, 90% of them do test as "excellent," but by persevering, I was able to identify those that did test in the lower "replace range." I appear to get the same outcomes with my Radio Shack one.Cons: Testing Coin Batteries is really odd. I was using the lower battery gauge, and as I watched the indicator slowly turn from High Green to Low Green while using a brand-new Duracell "medical" coin battery, I came to the conclusion that this device EATS/DRAINS coin cell batteries. Therefore, it is advised to avoid testing coin batteries until you are 99% certain that the battery is already dead because the BAT-250 will bury the battery in concrete even though it may appear to test coin batteries when doing so.Cons #2: When not in use, the tiny "test" needle jiggles a little. The Radio Shack one stays there until I test a battery, but I only have one BAT-250, so I'm not sure if the needle is moving normally or if I have a faulty one. However, for less than $10, you must pay your money and take a chance.Unrelated: As I was reading the plethora of favorable and unfavorable product evaluations, one thing stood out: IF you want a serious, accurate tester for batteries, acquire a multi-meter. Otherwise, grab a battery tester and hope for the best.



Battery Tester Checker – Battery Tester Monitor for AAA, AA, C, D, 9V and Small Batteries, Battery Life Level Testers w/Voltage Power Meter Review:


Before I lost it, I had a similar Radio Shack device that had been useful to me for more than 20 years.On Amazon, a number of comparable, if not identical, units are for sale. I advise selecting the one with the cheapest pricing.Although the construction has a somewhat flimsy feel to it, with careful treatment, I believe it will survive for a very long time.A platform is available for testing the voltage of AAA, AA, C, D, and some button-type batteries. Battery management is a little awkward. It was a little challenging for me to grip and position the batteries correctly on the flat platform because there are no holding guides. To establish touch and receive your reading on the color-coded meter, you slide a component along the platform.The device has connections on one end for measuring 9V batteries.I'm generally satisfied with this buy.Jerry



The Battery Organizer TBO1531 The Batt Storage Case with Hinged Clear Cover, Includes a Removable Tester, Holds 93 Batteries Various Sizes, Black Review:


I'm very happy I purchased this. This is one of those things that, while being completely indispensable, I honestly never knew I needed. Since I can remember, I've had a collection of haphazard batteries (of various shapes and sizes) stashed away in every drawer of my home. It's always been difficult to locate the batteries you need when you need them. When you do locate them, they are frequently already dead. My life has been a lot less stressful thanks to this organizer. I appreciate that I never have to search for a battery tester because it has a ton of storage space for batteries and keeps them organized and in one spot. Another wonderful feature is the possibility for wall mounting. I might simply get a second one and hang it in my basement. Good work! I cannot stress this more.



Battery Organizer Storage case with Tester can Hold 110 Battery Various Sizes for AAA, AA, 9V, C and D Size and Digital Battery Tester Review:


At first, I had bought https://amzn.to/2JQ1VqL yet when it comes to my plans, it has a fatal defect. The C battery converters I bought do not fit it.You see, I'm attempting to utilize rechargeables for the majority, if not all, of my electronics because I'm on a rechargeables splash. So I made the decision to buy a big charger and lots of batteries. Since some gadgets, like remote controls, gamepads, keyboards, and mouse, really require rechargeable batteries, I already had a few. But this method required me to replace practically all of the alkalines and lithiums in my equipment. My previous case was unsuccessful, but I liked it, so I kept it. My redemption came when I was given this case.Everything I put inside this case fit, even those annoying AA to C converter cases. I've now put all of my rechargeable devices into this one and my non-rechargeable devices into the one found at https://amzn.to/2JQ1VqL because it fits AA to D converters very fine. The contents of the other box can be used by my family, but I only use the items in this one since I don't want them to throw away my pricey rechargeables.If you have any kind of converter case for your batteries, you're safer with this one than the other, and the case feels sturdy and well-made. However, this organizer has no cover, which for me is not a deal-breaker but might be for others. Since the purpose of having it is to be able to rapidly remove and replace batteries, I don't know why I originally wanted a cover on it. I won't be installing it either (at least not planning to). We'll see whether I mount the other one to make it more obvious to family members so they won't steal this one. Overall, I really enjoy both instances, but this one is much more practical for me. I appreciate that I can get more batteries because this case can carry a few more. The only drawback for me is the eight 9-volt ports, as I only have four 9-volt devices and won't be using rechargeable 9-volt batteries anyhow (or maybe I will?). More AA or AAA spaces for me in that area would have been a better use of the space. Finally, I attest to the Abunro case.As per usual, I'll update if anything magically bends, chips, or breaks.



D-FantiX Battery Tester, Universal Battery Checker for AA AAA C D 9V 1.5V Button Cell Batteries (Model: BT-168) Review:


Batteries can be tested in a variety of methods. Some claim that this is not very accurate because it is not how you actually use a battery and that you can simply test the voltage of the battery while it is sitting by itself (NOT under load). Some claim that the battery is put under load by this gadget, making the measurement more precise.In essence, when you plug a 1.5 V battery into this device, a 4 ohm resistance (load) is simulated on the battery and the small meter displays the battery voltage. If you plugged your 1.5V battery into a device with a 4 ohm resistance (like your little flashlight or the energizer bunny toy), the battery would be discharged at 1.5/4 =.375 Amps, according to the helpful equation V = I times R. A battery has a total capacity (similar to a fuel tank) of a specific number of Amps for a specific number of hours, known strangely enough as amp hours. So if you draw a lot of amps from it, you can quickly deplete it, or if you draw a lot less, it will last much longer. The gadget you put the battery in determines how many amps are drawn; you don't actually have much control over this.A 1.5V battery will really indicate a voltage drop below 1.5V to a lesser number when you apply a 4 ohm load, depending on how much "gas is left in the tank." This tiny meter indicates that, but it displays red/yellow/green instead of the voltage value itself. It's a measurement that, in my experience, is rather accurate.Probably more information than you sought:



Battery Tester, VTECHOLOGY Model BT-168 Battery Checker for AA AAA C D 9V 1.5V Button Cell Batteries (Requires No Battery for Operation) Review:


With two kids, I have a tonne of battery-operated toys and household items, so having this small battery tester on hand is incredibly useful. I've undoubtedly been wasting batteries up until now, for instance if two good ones and one faulty one were fitted together. Now, I can truly check each battery to identify the source of a malfunctioning clock, flashlight, toy, etc. My eight-year-old now uses it with ease. Why I didn't purchase one of these things years ago escapes me!



Battery Monitor, DROK 10-100V Digital Battery Capacity Tester, Percentage Level Voltage Temperature Switch Meter Gauge 12V 24V 36V 48V LCD Display Marine RV Battery Power Indicator Panel Review:


This is very affordable, functions well right out of the box, and is very configurable for a large number of applications, battery kinds, and calibrations. In my situation, I utilize it to keep an eye on a deep-cycle battery that serves as a temporary emergency power source (in combination with a pure sine wave inverter). A quick way to check the battery's charge between usage and see how much power is left while using it. It features a built-in thermistor to monitor temperature and may be configured for the individual battery type you have (SLA, AGM, Gel) (which affects percentage charge calculation). The thermistor is not housed inside the module but rather is connected to the battery or power source by a separate remote wire. You should have one of these for uses such as camping, boating, emergency power, solar power, and other battery-powered devices. The programming instructions are understandable enough to follow even if they are obviously machine translated from Chinese and leave something to be desired.


How can a multimeter tell if a battery is bad?

A multimeter can tell if a battery is bad by checking the voltage. If the voltage is below 12 volts, the battery is considered bad.

How do you use a cheap battery tester?

A cheap battery tester is a great way to save money on batteries. You can use it to test the strength of batteries before you buy them, or to test the health of batteries you already have. To use a cheap battery tester, simply connect the positive and negative leads to the battery terminals and read the meter.

How many amps should a battery be load tested at?

A battery should be load tested at a rate of at least one tenth its capacity in amps. For example, a 100 amp-hour battery should be load tested at 10 amps.

How many types of battery tests are there?

There are several types of battery tests, each designed to evaluate different aspects of battery performance. The most common tests are capacity testing, discharge testing, and charge testing. Capacity testing measures how much charge a battery can hold, while discharge testing measures how quickly a battery loses its charge. Charge testing measures how well a battery accepts and stores charge.

Is 13.2 volts good for a battery?

Yes, 13.2 volts is good for a battery. This is the standard voltage for a lead-acid battery, and it means that the battery is fully charged.

What are battery testers called?

A battery tester is a device used to test the condition of a battery. It can measure the voltage, current, and capacity of the battery. A battery tester can also test for leakage, sulfation, and other problems.