Most electric guitars have necks that are either bolt-on or set-in. Bolt-on necks can be easily removed and replaced, and set-in necks are usually glued in place. There are also a few neck-through designs, which are more expensive and less common. So, are electric guitar necks universal? Not quite. While the vast majority of electric guitars use the same type of neck joint, there are some differences to be aware of. For example, Fender Stratocasters have a unique neck pocket size and shape that only fits Stratocaster necks.
There's no definitive answer to this question since it depends on what you're looking for in a guitar. Jumbo frets may be better for some players because they're easier to bend strings on, which can lead to smoother vibrato and overall better tone. They can also make it easier to play chords and arpeggios cleanly. On the other hand, smaller frets can offer better precision and control when playing single-note lines. Ultimately, it's up to the player to decide what feels and sounds best.
There is no simple answer to this question as it depends on a number of factors, such as the size of your hands, the type of guitar you are playing, and your personal preference. That said, many guitarists find that thinner guitar necks are easier to play, especially if you have small hands. They can also be helpful if you are playing a guitar with a lot of action (the distance between the strings and the fretboard).
4.3/5
100% brand new and high quality
Application for electric guitar
Heel Depth: 21mm / 27.5mm with Fingerboard
Banana Headstock Neck fits for Fender Strat Guitar replacement.
Tuner Hole Size: 10mm for Modern style tuners
$234
A decent neck, somehow. Purchased this only as a test run to alter the look of my 1980s Kramer focus. never had a maple or banana neck before. Neck slipped neatly into place; holes for locking tuners were bored; and it tuned up without any fret noise. The fret ends do have a small amount of protrusion, but it's nothing ridiculous and I can play without needing to file it down. I was shocked that after having a $40 neck shipped from warm to cold across the globe, I didn't really need to fiddle with a truss rod or anything. I was pleasantly surprised by this experience.
4.3/5
Set In style, white fretboard binding.
Package list: 1*guitar neck
Mahogany wood Flying V Style Electric Guitar Neck Maple Fretboard block inlay 22 Fret, 24.75 Inch
Truss rod at headstock, Binding headstock , normal nut, 42mm nut width
$234
The wood used to construct the neck is of high quality and feels pleasant to the touch. The truss rod functions effectively and enables the neck to be adjusted to achieve a straight neck. The nut seems to be made of poor white plastic, which is my sole criticism, although a better nut can be used in its place if preferred. The wood is flush with the binding. All of the inlays appear to be really realistic. would repurchase.
4.1/5
22 fret guitar neck, the peg holes diameter is 10mm for tuner installation.
100% customer satisfaction guarantee, contact us for any problem with no hesitate.
Adjustable guitar truss rod has been installed, you can adjust it if nessary.
For ST electric guitar, great replacement for your ST guitar.
100% new electric guitar neck, the neck and the fretboard are make of high quality imported CA maple wood.
$234
I construct kit guitars. Typically, I purchase the bodies and necks simultaneously in the hopes that the Chinese have at least attempted to assemble them before shipping. I wanted to attach a Strat neck to my Telecaster body. The two components, created by different businesses, scared me that they wouldn't fit together.I should not have been alarmed. I was astounded when I unwrapped the neck from its excellent wrapping after it arrived. It was stunning. The fingerboard and neck of maple were in perfect condition. Although I would have preferred not to have the neck treated, the neck's flawless surface just required that I clean the fingerboard and neck down with a polishing cloth. A perfect straight neck was present. The only substantial modification I made to the neck was to replace the plastic nut with a TUSQ XL nut, which fit in the area without any sanding or shimming (note the emphasis on the word "fit"). The frets needed a little bit of work, but I emphasize the term "little."Would I purchase a neck from these people again? without any hesitance. In fact, I've got a Strat build in the works, and I might replace the kit's neck with one of these.
4/5
Use for electric guitar replacement.
Neck plate fender with crews chrome.
Fender Size:64mm x 51mm/2.5"x2". The screw hole center size:51mm x 38mm/2"x1.49".
New and tested.
Make your guitar stand out with this neck plate.
$234
Steel of a good grade is used to make the plate and the screws. It has weight to it and fits like a glove. The polymer portion that supports the metal rear plate feels sturdy and powerful. The plate arrived polished and has a mirror-like reflection. Overall, I'm impressed and delighted that I bought this product.
4/5
Approximate dimensions: 12" x 2-3/4" x 1" (305mm x 70mm x 25mm)
Excellent support for a guitar neck while pressing or hammering frets, or a lower clamping caul for regluing a fingerboard
Wooden support with specially contoured and lined it cork to get a firm, non-marring, non-skid hold on the neck
Saw it into shorter lengths to make lower clamping cauls for glue-in fret jobs
$234
Unlike the other buyer, I don't have the same criticism of the construction. Yes, it is a pine board with a cork-lined semicircle in the center. Not quite a five star experience. Could this have been produced by me? Not with my equipment. Could this have been made by someone else for money? Yes, but the price would have been higher. You need a surface that is roughly the same thickness as the guitar body to lay the neck down in. It's all right. It is tall enough so that the headstock won't press against the table. I don't really have many issues about it as it is a functional support tool and costs less than $20. It's constructed of soft wood, which I don't think makes it very durable, and it's unfinished. You probably have some sandpaper sitting around, and you can quickly solve the issue yourself if you have a problem with sharp edges and splinters. You don't even need to see the StewMac logo; if you want to dress it up, you can even give it a good stain and finish. To avoid making a silly mistake like leaning on it while reaching over the guitar to get some sandpaper to smooth out the rough edges, just use it for what it was designed for and as a place to rest the neck down.
3.5/5
For Fender TL electric guitar, great replacement for your TL guitar.
Adjustable guitar truss rod has been installed, you can adjust it if nessary.
100% customer satisfaction guarantee, contact us for any problem with no hesitate.
22 fret guitar neck, the peg holes diameter is 8mm for tuner installation.
100% new electric guitar neck, the neck and the fretboard are make of high quality imported CA maple wood with rosewood strip inlaid on the back.
$234
Considering how inexpensive it was, I had very little hope. taken aback. I like that the neck is so thick. The only modifications I made to it before installation were to roll the fretboard edges and drill the headstock 10mm wider to accommodate locking tuners. Given that I use thicker strings, I haven't even needed to modify the truss rod. I gave it a general rating of four stars since, since I only bought one, I might have received the unicorn that didn't need any setup. I'll resubmit the rating for a 5 if I purchase more for different projects and they remain consistent.
3.4/5
"C"-shaped neck profile
Maple fingerboard with 12" radius and black pearloid inlays
Satin polyurethane finish on back of neck
Pre-slotted synthetic bone nut
22 narrow tall frets
$234
Great neck and organized packing.
You can, but it's not recommended. The neck will sit higher on the body and the fretboard will extend over the edge. This will make it difficult to reach the higher frets.
Most electric guitars will accept any type of neck, provided it is the correct size. You may need to make some minor adjustments to the body of the guitar to get the neck to fit properly, but this is generally not a problem.
A Telecaster neck can be put on a Stratocaster body, but it is not a recommended modification. The two necks have different dimensions and the Telecaster neck will not fit properly on the Stratocaster body. The Telecaster neck will also not line up with the Stratocaster's bridge, making it difficult to intonate the guitar.
No, you cannot put any guitar neck on any body. Guitars are built to very specific measurements and putting a neck on a body that is not meant for that neck can cause major problems. The neck and body must be designed to work together for the best possible sound and playability.
The guitar neck is one of the most important parts of the instrument when it comes to tone. The type of wood used, the thickness of the neck, and the construction all play a role in the overall sound of the guitar. A thicker neck will generally produce a warmer, fuller sound, while a thinner neck will tend to have a brighter, clearer tone. The type of wood used in the neck also plays a role in the tone. A maple neck will tend to produce a brighter, clearer tone, while a mahogany neck will have a warmer, fuller sound. The construction of
COPYRIGHT © 2019
