Best Computer Motherboards in 2022

Last update: December 14, 2022

Are all computer motherboards the same?

No, computer motherboards are not all the same. They come in different sizes and shapes to fit different computer cases, and they have different features to support different types of processors and peripherals. You need to choose the right motherboard for your computer build.

How do I choose a compatible motherboard?

When you are looking for a new motherboard, you need to make sure that it is compatible with the other parts in your computer. The motherboard is the main circuit board in your computer and it needs to be compatible with the CPU, the RAM, the hard drive, and the other parts. You can usually find this information in the motherboard manual.

How do I find out my motherboard size?

There are a few ways to find out your motherboard size. One way is to measure it yourself. You will need a tape measure and a way to mark the center of the motherboard. Once you have those, you can measure the length and width of the motherboard. Another way is to look up the specifications for your motherboard online. The manufacturer should have the dimensions listed. Finally, you can always ask someone at a computer store or an electronics store. They should be able to help you out.

Is it worth replacing a motherboard on a PC?

A motherboard is the main circuit board of a computer. It is also known as the mainboard, system board, or logic board. The motherboard connects all the parts of a computer together. It is where the CPU, memory, and all the other components connect to. If the motherboard is not working, then the computer will not work. Replacing a motherboard can be expensive. It can cost as much as a new computer. If the motherboard is the only thing that is not working, then it might be worth replacing it. But if other parts of the computer are not working


Raspberry Pi 4 Model B 2019 Quad Core 64 Bit WiFi Bluetooth (2GB) Review:


Well, it's another Pi.It's faster, they pretty much solved all of the previous faults of the former models, most notably the very devastating front side bus bottleneck (making older versions quite... Impractical to say the most) (making older versions very... Impractical to say the most). Interface throughput rates make sense now, resources are up, and essential functionality have been added.The HDMI is good. I experienced problems owing to a bad cable. I am some kind of electronics expert, with a very serious and well stocked workshop that takes up 1/2 floor of my home, and I only had one micro HDMI cable that ended up getting shot. Without a secondary video choice (maybe you can pipe a composite out of the board somewhere, I don't know, if you can it's none percent obvious) I had to wait for a cable order to get it functioning. This is sort of a con... But basic preparedness will avoid this being an issue.I ordered one (4gB model) for projects etc, and one (2gb) for my new netcore miniserver, which operates a pihole DNS and a few other very tiny services. However, now with gigabit Ethernet and a truly useful serial his interface, I plan on utilizing it for a fair amount more. I will be using an 18650 batt hat on the 4gB model, potentially interchangeably with a 7" screen. If I can develop a way out to use both together, I surely will.



Asus ROG Strix Z390-E Gaming Motherboard LGA1151 (Intel 8th 9th Gen) ATX DDR4 DP HDMI M.2 USB 3.1 Gen2 802.11AC Wi-Fi Review:


I've used ASUS goods for a long time, but I'll admit that upgrading from the z370 to the z390 was a bad idea. Nevertheless, this board can easily handle the 9900k running at 5 GHz across all cores. This time, heatsinks are present on both NVME drives. Additionally, a 40mm fan for the CPU VRMs was included. Up to this point, setup was simple and quick to fire up! If you're just going to purchase an 8700k, opt for the z370 to save some money. However, Intel forces us to change our motherboards whenever a new CPU is released for some stupid reason. But I'm happy the Z390E is all black!



Raspberry Pi 4 Model B 2019 Quad Core 64 Bit WiFi Bluetooth (4GB) Review:


Well, it's another Pi.It's faster, they pretty much rectified all of the previous shortcomings of the past models, most notably the absolutely crippling front side bus bottleneck (making older versions very... Impractical to say the most) (making older versions very... Impractical to say the most). Interface throughput rates make sense now, resources are up, and critical features have been added.The HDMI is good. I had trouble due to a bad cable. I am some kind of electronics wizard, with a very serious and well stocked workshop that takes up 1/2 floor of my home, and I only had one micro HDMI cable that ended up being shot. Without a secondary video option (maybe you can pipe a composite out of the board somewhere, I don't know, if you can it's none percent obvious) I had to wait for a cable order to get it going. This is sort of a con... But basic preparedness will avoid this becoming an issue.I ordered one (4gB model) for projects etc, and one (2gb) for my new netcore miniserver, which operates a pihole DNS and a few other very small functions. However, now with gigabit Ethernet and an actually useful serial his interface, I plan on using it for a good bit more. I will be using an 18650 batt hat on the 4gB model, possibly interchangeably with a 7" screen. If I can figure a way out to use both concurrently, I definitely will.



ASUS ROG Strix B450-F Gaming Motherboard (ATX) AMD Ryzen 2 AM4 DDR4 DP HDMI M.2 USB 3.1 Gen2 B450 Review:


*****UPDATE******The board's voltage concerns have been resolved by the new Bios update 0602. (make sure you update your bios) was able to overclock my Ryzen 5 2600 (non-X) to 4.1GHz with respectable temperatures using an Asus Strix OC GTX 1060 6GB and a Cooler Master MA410P tower heatsink with a Corsair ML120 Pro fan in place of the factory RGB fan. I still need to play around with my OCs, but otherwise, everything is rather solid.I think this motherboard is fantastic as a low-cost ROG board for AM4! I have only ever used Asus Republic of Gamers products that are of the highest caliber (all the way back to LGA 775 with the Maximus II Gene and then a Maximus IV Gene-Z on LGA 1155). In contrast to their higher end options, they now have the ROG Strix line for high quality affordable options. A novice PC builder will have no trouble using this board and a gaming computer, I'm confident. Using the Corsair Vengeance RGB Pro with Corsair iCUE, I have also not had SPD memory bricking, as I did with a Crosshair VI board and Gskill Trident Z RGB memory last year (as the ram currently doesnt support Aura). This board also boasts excellent VRM cooling; it was able to run a Ryzen 5 2600 at 3.85 GHz on a Cooler Master MA410P with good temperatures and the VRM remaining cool. The only drawback is that this board requires Windows 10 in order to receive updates if you're unwilling to switch platforms, are still using Windows 7 or 8.1, or are simply a tin foil hat user. This is because Microsoft uses the same telemetry whether you use Windows 10 or not (yes it has Windows 7 drivers but Microsoft will not service windows update to earlier then AMD Summit Ridge and Intel Kaby Lake based chips). This board costs more than cheaper Asrock and MSI B450 boards (most B450 boards cost between $70-$110), but if you're a Republic of Gamers on a tight budget, don't need Nvidia SLi (I'm assuming you're only running one GPU if you're getting this), need a good B450 board for overclocking, and want something better than the subpar boards made by Gigabyte, then get this.



MSI Arsenal Gaming AMD Ryzen 1st and 2nd Gen AM4 M.2 USB 3 DDR4 DVI HDMI Crossfire ATX Motherboard (B450 Tomahawk) Review:


My first Ryzen setup went far more smoothly than other systems I've constructed in the past, with almost any problems. Wonderful Motherboard. It is strong and well-built. Not as horrible as some other reviews had claimed, the sound quality. A unique feature of the MysticLight software is its lighting effects. The motherboard is generally rather robust, well made, and I would recommend it.Tips for new Ryzen builders on this forum are provided below.#1 Install dual channel RAM and memory in the second and fourth slots "left to right"#2 If you want to install a version of Windows 10 that was "originally upgraded from Windows 7/Windows 8/8.1," you no longer have to install the older version of Windows 7 or 8 to upgrade; instead, Microsoft has made it simple to install Windows 10 directly and activate it with your older Windows 7 or 8 product key. Windows 10 can be installed without a product key, and when it has started, you should be able to activate it by going to the Windows properties/System Information page and doing so while online.#3 Purchase some mounting screws to attach the board to the casing because this board is missing the necessary hardware when it is received. "At least mine didn't come shipped with the mounting screws, as many other reviews claimed," said one customer.#4 Corsair Vengeance LPX 16GB (2x8GB) DDR4 DRAM 3000MHz C15 Desktop Memory Kit - Black is what I'm using (CMK16GX4M2B3000C15) on this forum. After installing Windows, I had to access the bios and enable XMP Profile 2. Ram/Memory was initially set at 2133MHz, but after configuring XMP Profile 2, saving changes, and restarting the device, it was changed to 2933MHz ("Yours may be different").Positives: The instructions were well written and included illustrations (Do Read the instruction manual)Cons: No mounting screws were included. I was quite disappointed when I received the board and was ready to place it into the case. Fortunately, I already had enough mounting screws from a prior build.



ASRock MicroATX Motherboard (B450M PRO4) Review:


My mind is blown by the size and pricing of this motherboard. It provides a lot. Although it is a MicroATX board, it is far more expandable than I had anticipated. They are 2 M. 2 PCI-E slots, 4 RAM slots (up to 64GB), and 2 SSD slots, one of which is for NVME. Numerous connections are available on the back IO, which also supports micro-USB, 5 USB 3.0, 2 USB 2.0, HDMI, VGA, and DVI. It has a ton of versatility!With an AMD Ryzen 3 2200G processor, I utilized this, and so far everything has been wonderful.The IO shield's simple silver hue and unattractive appearance are its sole drawbacks. However, you won't see it because it will be hidden in the back of your computer, right?If cost is an issue, I believe this provides a lot for the money and is a wise pick.



Gigabyte Z390 AORUS PRO WiFi (Intel LGA1151/Z390/ATX/2xM.2 Thermal Guard/Onboard AC Wi-Fi/RGB Fusion/Gaming Motherboard) Review:


Background: I've been in the IT industry for 24 years, the first few of which I spent in a tiny PC-building firm in the 1990s.I change my system about every five years at this point, and for the first time in a while, market rivalry has led to significant breakthroughs. I went shopping to replace my Core i7-4790K system, and because the Intel i9-9900K was more affordable, I chose it. I've tried the majority of the top mainboard manufacturers (Gigabyte, MSI, ASUS, Asrock); I searched across all top manufacturers for a reliable Z390 board with high-quality construction, particularly in voltage regulation, but with a good amount of features I enjoy. Currently, Amazon is offering this board for the most affordable price of any retailer, and after looking around, I discovered that the Z390 Aorus Pro WiFi also featured all the characteristics I was looking for, while many rivals in the same price range lacked them or demanded higher prices.PROS:-A thick, sturdy PCB that won't bend or warp too much.-The Aorus Elite, Pro, Pro WiFi, and Ultra boards include high-quality voltage regulation (all have the same setup). Be aware that ASUS, for instance, costs significantly more for its ROG STRIX Z390-E and doesn't have nearly as effective voltage control until you reach their top-end boards. Although MSI's MPG Z390 Gaming Pro Carbon AC (say that three times fast) board is more expensive, it has comparable quality.-Using high-quality capacitors, the Realtek ALCS1220 audio onboard codec is isolated from the PCB's electrical components to reduce crosstalk. On a Logitech 5.1 speaker system, it sounds quite nice; I had no pops, crackles, or other flaws.-Two M.2 NVME SSD slots, each with a heatsink included (Note:, Using these will take away some SATA ports; read the specs and know this beforehand, this is how the Z390 chipset works for every vendor, there are only so many PCIe lanes)-Intel gigabit NIC and onboard Intel AC wifi, both of which I tested with a Ubiquiti AC access point and found to function extremely well.-Metal-reinforced DIMM sockets and two metal-reinforced PCIe slots to avoid board bending and slot breaking for my SLI setup.-Two temperature sensor headers onboard, which, when used with the sensor leads provided, will allow you to check the temperature of specific regions in your system.-An abundance of USB2, USB3.1, and USB3.1C ports to accommodate your needs.-Gigabyte DualBIOS safeguards against unintentional BIOS corruption-A built-in backplate; it's a modest but welcome addition that you won't lose.CONS:-BIOS. Although it's not the worst thing in the world, Gigabyte's BIOS is less user-friendly than ASUS's (the market leader) and has many options tucked away in sub-menus that aren't always well stated. It won't be a problem after you've got the board set up how you like it, but if you like to adjust things, you'll need to do a lot of study to define some options or even figure out where they are. Consequently, I took one star away. Additionally, make sure you have the most recent revision (F9 at this time)-I would have liked to see a debug LED, a Displayport connector in addition to the HDMI, and power/reset CMOS buttons on the backplate on this board. Of course, this would increase the cost, and at this price, no one has the debug/LED, power, or CMOS buttons (a few have the Displayport). I'm not stealing anything for this; I'm simply wishing.I've had this board for a month, and during nearly three of those weeks, when I wasn't gaming, I ran Folding@Home on my i9-9900K, which utilizes 100% of my two Geforce GTX 1070 graphics cards and 100% of all eight CPU cores at 4.8GHz max turbo speed. With no crashes or glitches, my system has been incredibly steady (with a Seasonic Platinum I 1000w PSU). All of my games have either ran at least 10 frames per second faster (many more than that) or have allowed me to increase the level of detail in comparison to my 4790K system (with the same graphics cards) at a resolution of 1900x1200. Without a doubt, this board is the best model available for around $200; anything above that price is basically fluff or features intended for liquid cooling users. solid acquisition.UPDATE 7/11/2019 - I upgraded my storage, keeping one of the SSDs for storage and added two HP EX920 1TB M.2 NVMe x4 SSDs. Previously, I had two Samsung 850 Pro 512GB SSDs (2.5") and one WD Black 1TB. They function flawlessly and move quite quickly.If you utilize NVMe, the first SSD only uses one SATA port, whereas the second SSD uses two ports (4 and 5). I still have room for the SATA SSD, a DVD burner, and the SATA dock integrated into my case with one port left over after using these two drives.



ASUS Prime Z390-A Motherboard LGA1151 (Intel 8th and 9th Gen) ATX DDR4 DP HDMI M.2 USB 3.1 Gen2 Gigabit LAN Review:


There were no reviews on this, so I felt like I was taking a bit of a risk, but considering the ASUS Z370-A MB was popular in reviews, I went for the Z390 Prime-A. I am glad I did. I am not a gamer, I work with DAWs and rendering video. I loaded it up with the i7-8700k and 16GB of G.Skill RAM, and the first boot (which I expected to be a disaster) ended up working flawlessly. I didn't expect it to have AURA RGB lighting, that was a fun surprise, but so far it is living up to all of its product description without any problems. The only trouble I ran into was installing drivers. For some reason, the included ASUS DVD would not let me install LAN or audio drivers, I had to find those driver directories on the DVD-ROM and install them by clicking "run as administrator."I went with ASUS because their BIOS gives you complete control over your PC by letting you change anything you want. It has an excellent GUI whether you aren't sure what you are doing, or you are an advanced user. The overclocking software and fan control software are very easy to use, and probably the best (and safest) way to learn how to control your PC hardware.



ASRock B450M-HDV R4.0 Socket AM4/ AMD Promontory B450/ DDR4/ SATA3&USB3.1/ M.2/ A&GbE/MicroATX Motherboard Review:


Built very well, it is perfect for my Ryzen 5 2400g (not recommended for the Ryzen 5 non-apu as there is only a 4pin cpu power header), and aside from high core count compatibility, there is nothing else to mention about the board's cons. It is more than adequate at this form factor and has all the features expected of a b450 chipset at a very affordable price. I bought this to replace an a320m chipset motherboard because it could not support my wiping 65watt ryzen 5 and was actually more expensive but less compatible. It currently houses a meagre two core athlon200ge.



Asus Prime B450M-A/CSM AMD Ryzen 2 AM4 DDR4 HDMI DVI VGA M.2 USB 3.1 Gen2 mATX Motherboard Review:


Excellent equipment for my Micro project! My Masterbox Q300L (no CD or DVD) fits nicely. came along with a newly updated BIOS (yes, I checked the site). When I installed my Ryzen 2600 into the motherboard, my G.Skill RAM and Seasonic PSU functioned well at stock speed (3.4).Ram performed outside of the box. Connect and play. RAM was detected by the motherboard as 2133, and a quick bios update to 3.0 revealed no issues. similar to CPU. started at 3.4. Quick bios switch to 3.8, solid and low voltage. Since I don't overclock, I'm content and relaxed. Finally, the stock fan is SUPER EASY to install in my case and VERY QUIET. Finally, without a CD or DVD in case I choose to install Windows 10 on a USB drive. Never again will I utilize a Windows 10 CD, OMG. Even with HDDs, USB 3.0 is VERY fast. Windows makes creating a Win 10 USB very simple. For the final setup, all you need is a good Win 10 code.Finally, I must say that I HATE the LED, PWR switch case connector BS. C'mon, people, this is 2018 FFS!in total. ever the easiest construction. OBTW: I prefer the case's option to mount the hard drive below the motherboard rather than in a drive bay - the wiring is much cleaner and the case is quite sturdy.Strong build quality, attractive layout, and upgraded BIOS were all positives.Mobo faceplate for the case is meh. I'm not sure if it's the case connector or the motherboard, but I was unable to fully flush my front case USB 3.0 connector with the motherboard. Works great, however the connection doesn't fit well physically; I believe the case connector is to blame, but I'm not sure. Mobo printed instructions' case connectors diagram is feeble, and my eyes are getting older.A good piece of equipment!A few details:Desktop Memory (PC4 24000) G.SKILL Aegis 8GB 288-Pin DDR4 SDRAM Model F4-3000C16S-8GISBVideo Card, ASUS GeForce GTX 1070 DUAL-GTX1070-O8G, 8GB, 256-Bit, PCI Express 3.0, HDCP-ReadyMasterBox Q300L mATX Case by Cooler Master with Magnetic Dust Filter, Transparent Acrylic Side Panel, and Air Flow PerformanceSeasonic FOCUS 550 Gold SSR-550FM Compact 140 mm Size Power Supply 550W 80 Gold ATX12V


What are motherboards on a computer?

A motherboard is the main circuit board in a computer. It holds the computer's central processing unit (CPU) as well as other vital components such as memory, connectors for input and output devices, and expansion slots. The term "motherboard" is also used to refer to the logic board in some video game consoles.

What are the 3 most important parts of a motherboard?

The 3 most important parts of a motherboard are the CPU, RAM, and storage. The CPU is the brains of the operation and handles all the calculations and processing. The RAM is the short-term memory where data is stored for quick access. The storage is the long-term memory where data is stored for future use.

What are the 3 types of motherboard in computer?

The motherboard is the heart of the computer, where all components connect to. There are 3 types of motherboard: AT, Baby AT, and ATX. Each type has different features and uses different connectors.

What are the 5 different types of motherboards?

The five different types of motherboards are AT, Baby-AT, LPX, microATX, and mini-ITX. AT motherboards are the oldest and largest type of motherboard. Baby-AT motherboards are smaller than AT motherboards and were popular in the 1990s. LPX motherboards are designed for use in low-profile cases and have fewer expansion slots than ATX motherboards. microATX motherboards are even smaller than mini-ATX motherboards and are designed for use in very small cases. mini-ITX motherboards are the smallest type of

What are the 6 main parts of a motherboard?

A motherboard is one of the most important parts of a computer. It is the main circuit board that holds all the components of a computer together. The six main parts of a motherboard are the CPU, RAM, ROM, I/O ports, expansion slots, and power connectors. The CPU is the central processing unit of a computer and is responsible for all the calculations and processing that a computer does. RAM is random access memory and is used to store data that the CPU needs to access quickly. ROM is read-only memory and is used to store data that does not need to be changed

What are the two most common types of motherboard?

The two most common types of motherboard are AT and ATX. The AT motherboard was the original design, and it is still used in some older computers. The ATX motherboard is the more modern design, and it is used in most new computers.