4.8/5
Rounded front and back edges
Extra heavy-duty top
NSF Certified
Adjustable height under-shelf
Adjustable height non-marring feet
$234
My table came without damage, with the backsplash only slightly bent. I must caution anybody who are not used to putting things together that I utterly messed this up because of my own incompetence. I spent a long time putting it together and was completely insane. When I was finished and it started to wobble, I noticed I had put the legs in backwards. The feet are the small brown plastic ends because they twist out to balance the piece. Duh. Additionally, I had attempted to insert the L-shaped tool's short end rather than its long end into the screw holes. Then, to tighten it, I needed a large wrench. Seriously, it took around 40 minutes to put it together correctly, and I am quite happy with how precisely balanced it is. I don't know why I was so confused when simply by looking at the pieces, everything seemed completely clear.
4.6/5
SLIDING WIRE BASKET AND SHELF - Includes a pull-out storage basket (18. 25" x 14. 5" x 4" H) and steel wire shelf (24" x 20") with UltraDurable commercial-grade steel wire construction.
NSF-CERTIFIED STORAGE - Certified by the NSF to NSF/ANSI Standard 2 - Food Equipment for use in dry and heated storage environments.
BONUS 3" WHEELS - Includes smooth-rolling 3" diameter rubber swivel wheels (2 locking) for easy positioning in your garage, office, warehouse, workshop or home.
Dimensions: 24" W x 20" D x 36" H; Top: 24" x 20" x 1. 5" thick
STAINLESS-STEEL TABLE - Table top (24" x 20" x 1. 5" thick) features solid, grade 443 stainless-steel construction with a brushed finish and bullnose front and rear sides.
$234
For the 24 x 20 unit only.The quality of this unit really astonished me. The top is made of sturdy stainless steel that will be ideal for my purposes. Because it meets my demands so well and is well-built, I'm giving it five stars. But I'll also mention a few things that some other folks might need to know or might find offensive.For me, assembly was simple and painless. I've put together shelving that holds the shelves in the same way as this does. Once the shelves are perched on the mounts, the difficulty is to exert pressure. This fixes them in place and greatly improves the stability of the unit. It does not wobble at all for me after assembly and making sure pressure was applied to all shelves and the top.The working area is raised to a level that I find comfortable thanks to the wheels (36 inches). Use of the levelers will result in a lower height. The main drawback to the wheels would be that while they do prevent them from rolling, they do not lock their spin. Therefore, it would probably be better to utilize the levelers that are included rather than the wheels if someone wanted to use this for, instance, rolling or kneading bread. Alternatively, you might get wheels that lock in every direction.The working area is reduced by the top's rounded sides, making the real working (flat) surface just around 24 x 18 3/4. I don't have a problem with this, but someone who expects the entire 24 x 20 space to be flat could.You shouldn't count on being able to lift this unit to drive it over bumps. Although it is designed to roll about on flat surfaces, it cannot be raised by the top. It will probably come off if you lift the top. Again, I have no problem with this.I've utilized the following maintenance advice for all of my stainless steel products:Fingerprints. Yes, stainless steel is covered in fingerprints. It will readily accept fingerprints unless it is specifically coated, like some refrigerators and stoves. Utilizing glass cleanser and a soft cloth to wipe against the grain of the steel will make them easy to remove. And you should definitely clean them off. The stainless steel is corroded by fingerprints.On stainless steel, never use chlorine bleach. Use a gentle detergent and warm water. Use ammonia if you need to use something more powerful. After, make careful to rinse and dry.
4.3/5
SLIDING WIRE BASKET AND SHELF - Includes a pull-out storage basket (18. 25" x 14. 5" x 4" H) and steel wire shelf (24" x 20") with UltraDurable commercial-grade steel wire construction.
NSF-CERTIFIED STORAGE - Certified by the NSF to NSF/ANSI Standard 2 - Food Equipment for use in dry and heated storage environments.
BONUS 3" WHEELS - Includes smooth-rolling 3" diameter rubber swivel wheels (2 locking) for easy positioning in your garage, office, warehouse, workshop or home.
Dimensions: 24" W x 20" D x 36" H; Top: 24" x 20" x 1. 5" thick
STAINLESS-STEEL TABLE - Table top (24" x 20" x 1. 5" thick) features solid, grade 443 stainless-steel construction with a brushed finish and bullnose front and rear sides.
$234
I want a spotless kitchen with plenty of usable open counter space, and this table was the ideal fit for me at a pretty good price. It is perfectly positioned for my counters, but obviously, results may vary.This table is ideal if you prefer the stainless steel aesthetic or want a table that complements your black/stainless appliances. The top is made of flawless, polished stainless steel (mine does have some light scoring on the edges, but not unexpected when dealing with metal). Sadly, the shelves and legs are galvanized rather than stainless, but they still have a beautiful appearance.This exceeded my expectations in terms of the product's construction quality. The table is heavy, which increases its stability, and all of the materials are of a high caliber. I was really worried that the shelves and legs would be made of thin, inferior metal. But I received a welcome surprise. I was convinced that the sturdy legs could sustain the weighty top due to their construction. Additionally, the leg space is acceptable. Other comparable tables I looked at seemed to have a smaller space between the legs, which I think would have an adverse effect on stability. This table's leg/shelf base is sufficiently wide to prevent the table from tipping over. Additionally, I think it was a very nice addition to put soft rubber coverings to cover the movable metal "feet" on the table.Since I don't have a pantry, as you can see from my photo, I bought the extra shelf to provide more storage space. Assembly was slightly more challenging because of the extra shelf, but not enough to make me think twice about recommending this item. In general, especially if you buy the extra shelf, I would advise hiring a friend to assist you in assembling this item. I was able to put it together myself, but it was more difficult than I had thought. Additionally, if you buy the extra shelf, I advise you to ignore the assembly instructions and put together the base on its side first (as opposed to vertically as the instructions call for). The bottom shelf and middle shelf will be challenging to keep in place if you according to the directions (without a second person assisting).Last but not least, I should mention that the table is neatly packaged to prevent damage during delivery and came in excellent condition. Both the outer and inner boxes offer some additional protection. With the exception of some slight scoring around the edges, which is probably from where the steel was cut, my table was free of any dents, scratches, or other flaws.Overall, I heartily endorse this product.
4.2/5
Rounded front and back edges
Extra heavy-duty top
Adjustable height under-shelf
NSF Certified
Adjustable height non-marring feet
$234
(24"Dx60"Lx36"H with fully extended leveling feet)I found just what I needed! I believe that my favorable evaluation should respond to some of the critical remarks.1) "Not truly commercial grade"—I can tell you that it is 18 gauge steel and is what restaurant supply stores describe to as "low duty." 16 gauge steel, which you are assuming to be "commercial," would double the cost. This is quite durable for usage at home. will hold all of your small appliances, cookware, and other items.2) If the 18 gauge steel table you MAIL ORDERED "came damaged/ scratched/ dented/ bent/broken nuts/ rust areas," it is to be expected. Gridman is not liable if UPS or FedEx mishandle the package or improperly expose it to the weather while in transit.Compared to the little particle board islands sold at Target and IKEA or the nearby secondhand restaurant equipment business, this table is a MUCH BETTER bargain. No plastic cutting board insert, no cultured stone overlay, and no laminate that will peel off if it gets wet too frequently. Just steel, which is resilient and bright.The backsplash is great for preventing anything from falling off. I placed my shelf close to the ground, but the set screws may be used to position it almost anywhere (keep a level and tape measure nearby to ensure a level surface). I took 30 minutes to assemble it by myself.
4.2/5
Rounded front and back edges
Adjustable height non-marring feet
Adjustable height under-shelf
NSF Certified
Extra heavy-duty top
$234
Sure, it has certain problems. I don't care. It's strong and attractive, but it does reveal any – and I mean ANY – scratches that may occur on the surface. If you wanted something that wouldn't be damaged or appear to have been used, you would have to pay more. most likely a lot more.I added writing to the picture but it's probably too small to see; it simply states, "Fixed using pliers and small hammer." I don't blame the shipment or the packaging because it's a hefty damn table and I live in Alaska. It also came with a dented/bent corner on the back top left. Just a little bend separates you from shipping a few thousand more miles... I'm ok.The only reason I docked a point was because it would be difficult to adjust the "adjustable legs" to the exact height all the way around. Assembly was quite quick. Of sure, it's possible, but the process would be lengthy and possibly irritating. There are four screws per leg, two of which are used to tighten/hold the legs in the top of the table and two of which are used to secure the middle shelf. I positioned the shelf with a level, and it worked out beautifully! The shelf also significantly increases the table's stiffness and strength because, once the Allen screws are secured, the table's legs do not move at all.If I'm wrong, I'll correct this, but I think the table's height when the legs are fully seated in the top is around 34.75 inches. Not backsplash height, but table height 34.75. As you can see from behind the table, my counter is around 36 inches tall, thus the back splash is almost exactly at the same height as the center island.This table added a significant amount of counter space and was a lovely addition to our kitchen. All I did was install a sizable chopping board, and that was it. The roses were for our anniversary, okay.I used a Clorox wipe to clean the table (center/right of picture), but it left some streaks behind. I then used a Windex wipe, and the table was nearly spotless. Naturally, Clorox destroys everything and has removed everything from the table, but they are significantly more wet. Leave to dry, then return with Windex, and everything will be fine.
4.2/5
Rounded front and back edges
Adjustable height non-marring feet
Adjustable height under-shelf
NSF Certified
Extra heavy-duty top
$234
OK My table was just put together, and for the price I paid, it's a fantastic table. It's heavier than I anticipated, but know this as long as yours is undamaged, as some have claimed—mine wasn't—which is to say, it's not damaged! It is not 304 stainless; rather, it is more comparable to 408 stainless, which is less expensive stainless and will rust on the surface due to the carbon that is in it. This cheaper stainless is known as dirty stainless because a magnet will stick to it, whereas 304 stainless will not have any carbon. However, you can prevent rust on your table top by wiping it down with any type of cooking oil and applying a thin layer on top of it. I'm updating this table, so if you notice any scratches that irritate you, use some orange hand cleaner with grit in it. And use it to buff away the scratches before cleaning it with white vinegar or rubbing alcohol (just using orange cleaner on the top)!
4.2/5
NSF Certified
Adjustable height non-marring feet
Adjustable height under-shelf
Rounded front and back edges
Extra heavy-duty top
$234
Fantastic professional piece of machinery! Also fantastic is the pricing! I had trouble removing some stuck nuts because I had forgotten to bring the Alan wrench. It was with the legs, which I missed. Luckily, I placed my trust in another review when I thought mine had disappeared. It is heavy and performs well, so it wasn't! I was able to find a shelf underneath Seville that is 18" and has drawers for additional storage because I had to use it sideways in my small kitchen. I want to lower the shelf, which is entirely adjustable, a little bit more so I can access the tops on my new little appliances.Were the legs discolored? a small amount of plastic? And I was able to remove the mottled appearance using only glass cleaner and recycled paper towels. I'm delighted I purchased the table; it's fantastic! I only had one minor scratch, which doesn't bother me at all. Therefore, I wholeheartedly suggest it. Regarding the Alan wrench and a package of nuts. It can be utilized sideways in the leg region! And for even more storage, there are shelves that may go underneath.The only problem was that one leg either vanished or was shot. My ability to level is limited because it's much deeper, but I have the table level (enough); I only need to modify the shelf at some point (sooner rather than later).
4.2/5
NSF Certified
Adjustable height non-marring feet plus a set of 4 heavy duty casters
Rounded front and back edges
Adjustable height under-shelf
Extra heavy-duty top
$234
a really upscale table. For people who are taller, work height is ideal. This table is incredibly adaptable because to its wheels. Roll it inside for more prep area for holidays and parties, or roll it outside for partying. The packaging was somewhat flimsy. There are numerous dents from the legs since they are not fastened inside the box. Some still use the tried-and-true dry ice and heat gun technique.
4.2/5
NSF Certified
Extra heavy-duty top
Adjustable height under-shelf
Rounded front and back edges
Adjustable height non-marring feet
$234
Although this item is well-built, there is not enough attention to detail. Although it was transported by USPS, it arrived in good condition, so I'm delighted that's the case. Anyway.... Only a small ding on the shelf edge (which happened before it was packed), which is not a major deal considering it is commercial. Because the bolts that were soldered underneath did not match the holes that were drilled in the table top support, the top's metal surface deformed at the base of the bolt when the support was pressed on. (While cleaning, I keep touching it with a sponge because I assume it's unclean, but I later realize that's just the bolt spot.) Additionally, the surface of it had a significant scratch. My backsplash appeared to be in good condition, and the protective film was still on my table and shelf.Overall, if you don't expect perfection, this is a great bargain given the price. Shoot, I'm sure I'll dent and scratch it in a month just from regular use. That it made it through the post office still astounds me.Stainless steel that is ferritic (magnetic) is used to make this table. To hold pot holders, lids, and other items, I intend to hang magnetic hooks from underneath the table top.At the same time, I also ordered the wheels or casters for the table, but I chose to return them because we won't be using them. Small and lightweight, the table may be pulled out to sweep and clean. It would have been taller than our typical 36" cabinet tops because of the wheels. Although I could have eliminated the legs, I thought the wheels were unnecessary for our circumstance. Before the legs are attached to the table, the grey adjustable feet can be removed using a piece of conduit or a broom handle from the other end. When the feet are fully extended, our table is about 1/4 inch too short (35 3/4 inches vs. 36 inches to the top of the current counter top) because they also adjust by a full inch. It is stronger with the legs bottomed down to the tab stops in the table support, and the lower height doesn't worry me as much as a height that is too high. I could remove the legs from the table support by a quarter inch and tighten them.If we ever require additional tables, I would continue to purchase it.
4.2/5
Extra heavy-duty top
NSF Certified
Adjustable height under-shelf
Rounded front and back edges
Adjustable height non-marring feet
$234
This evaluation pertains to the 36 by 24 table.Four of the bolts that were welded onto the top table were already broken off when it was delivered. Although it was disheartening, my microwave appears to be holding up thus far without any problems. I really hope it stays that way since I don't want to have to send back such a big, heavy thing. I took pictures of it so that anyone considering buying this table could see it. The top of the table has a few little dings or more, but because it is for my kitchen, I wasn't too concerned about that. For those who are interested to know, it is made in China. My spouse and I constructed this... I mostly only helped him when she was ready to add the second shelf. For that portion, two persons are preferable, although one person could manage it. Be careful not to overtighten the legs before the second shelf is in place. To enable us to slide the shelf down to the height we desired, my husband had to loosen several of the legs. For this step, you'll need a tape measure to make sure that all the sides are the same height. I adore this table and would purchase it again. Given that I have such little counter space, I guess I'll buy the 24 by 24 table mainly to have more room to cut things. Although my kitchen is far from complete, these tables make it simpler to conserve space. I simply adore these. I snapped numerous photos.
COPYRIGHT © 2019
