Best Chain Saw Sharpeners in 2022

Last update: November 11, 2022

Are chainsaw chain sharpeners worth it?

If you're a casual chainsaw user, then a chainsaw sharpener might not be worth the investment. However, if you're a professional or someone who uses their chainsaw regularly, then a chainsaw sharpener can save you a lot of time and money.

Are electric chainsaw sharpeners good?

An electric chainsaw sharpener is a great tool to have if you regularly use a chainsaw. It can save you a lot of time and effort when it comes to keeping your chainsaw blade sharp. There are a few things to consider when deciding if an electric chainsaw sharpener is right for you. The first is whether you have the power source available to run the sharpener. If you don't have access to an outlet, then an electric chainsaw sharpener won't be much use to you. The second thing to consider is how often you'll be

Does Ace sharpen chainsaw chains?

Ace does not sharpen chainsaw chains.

Does cutting wet wood dull a chainsaw?


K KERNOWO Chainsaw Sharpener, Chainsaw Teeth Sharpener Fast Sharping Stone Grinder Tools Chain Saw Blade Sharpener Compatible with 14/16/18/20 Inch Two Holes Chain Saw Bar (2pcs Extra Whetstones) Review:


What appears to be a brand-new, acute masterwork now rests where a dull cutless blade formerly stood. Chainsaws are a part of my life and career as a landscaper. When it was taking too long to cut through logs on a job site, I was about to give up on my blade and just buy a new one. However, a fellow employee of mine told me about this amazing device he found, saving me from making that decision. He claimed that simply sharpening his blades whenever they were dull allowed him to save hundreds of dollars. When he allowed me to use his merely once, I began to doubt it since it seemed too good to be true. Boy, was I wrong. I was smitten! I ordered 1 right away during my next break, and it arrived in two days. Whether you want to believe me or not is up to you. Without merit, I wouldn't be leaving this review. Therefore, invest today and save some money in the long run. Later on, you'll thank me.



Chainsaw Sharpener File Kit – Includes Flat, 5/32, 3/16, 7/32 Inch Round Files, Depth Gauge Tool, Filing Guide, Wood Handle & Bright Red Pouch – for Sharpening Chain Saw Blades - 8 Piece Combo Set Review:


The files are of average quality; however, because they are a little softer than other types, they lose their sharpness more quickly. The kit is packaged in a stylish carrying pouch that keeps the tools tidy and provides space for a few extra tools, such as flat blade and torx wrenches and additional files. In contrast to plastic ones, the hardwood file handle is quite comfortable to hold. This kit is the best available for the money.



SYITCUN Chainsaw Teeth Sharpener Portable Bar-Mount Electric Chainsaw Chain Sharpening Kit Fast-Sharpening Stone Grinder Tools for Saw Chain Sharpening Tool System Abrasive Tools (Yellow) Review:


We chop all of our own firewood, so my husband frequently uses a chainsaw. It received quite a workout after the recent storm that brought down numerous trees. My spouse was pleasantly delighted because he didn't think this device could sharpen a blade. Along with using it to sharpen his chainsaw, he also distributed it to his neighbors who were aiding in the storm cleanup. They were astonished by how simple it was to use. Simply mount it to the bar, secure it with a clamp, and then run the chain while pressing the point of the chain against a log. There is no moe filing the chain's teeth one by one. This device operates smoothly!



Pferd 17300 CS-X Chain Sharp Filing Guide - 5/32" Review:


This system for sharpening chainsaws is excellent. There weren't many reviews with post-sharpening pictures, so I added a few. The saw is an 80-volt Kobalt, however an Oregon 12" bar with a 0.050" gauge chain has been installed in place of the original 18" bar. I highlighted the raker portion of the chain with a red Sharpie because I wanted to observe where and how it was being filed (which I also use to mark the chain so I know my starting point).Several suggestions:1) If your bar curves, as this Oregon Pro 91 does, you should strive to sharpen on the flattest area of the curve. In my case, this means that I'm sharpening closer to the saw body because the front third of the bar clearly curves. On shorter bars like this one, it becomes more of an issue. There is no problem with the somewhat flat Oregon Double Guard bars.2) Before removing the center file, mark it since the inside end is notched, and you will need to install it in the same manner (if you reverse it, it will not cut). The instructions make no mention of this.



Pferd 17304Pferd CS-X Chain Sharp Filing Guide - 7/32" Review:


I didn't have high expectations for this because I essentially simply got it to replace my worn-out file handle.In the past 30 years, I've experimented with a wide variety of files and jigs since I cut a lot of wood.I've tried rotary disc sharpeners and stone sharpeners powered by Dremels, but both of these work best on a benchtop, remove too much metal, and leave the teeth with a slightly off-center profile, which results in a poor sharpening job.I tried the shaky clamp-on jigs that beginners normally start with but end up discarding since they are difficult to handle and too fragile to carry in a field box without breaking them. So when I go into the field, like the majority of serious woodcutters, all I have is a flat file, a round file, and a handle that fits both. You can imagine how many files it takes to completely wear out a handle, so I got this one after mine handle wore out.The all-in-one raker file struck me as "cute" and gimmicky, and I fully anticipated pulling it out whenever I wanted to use it. This is due to the fact that I have a tendency to file my rakers quite aggressively. I also run a powerful engine to allow "flow chip" to exit the saw's exhaust port rather than to create fine sawdust. When I used this file for the first time, I was shocked to find that it actually made contact with my rakers at a depth similar to what I would have filed them to. However, it wasn't consistent, which astonished me because it revealed how inconsistent my freehand filling actually was. Consistency is beneficial. This file might eventually make my worn-out chains better. I may really challenge it to even-out that chain because a friend sharpened it so incorrectly that it rolls lengthwise in an 18" log. It's an unfair test.How did it file, then (with experience, but not with meticulous care)?Chisel sharpness: depending on my subjective grabbiness, around 90% as sharp as I CAN get the teeth. That's maybe PERFECT considering how well a truly razor-sharp tooth slices one log before becoming dull. When it's new, this is DARN sharp, and it should maintain its sharpness for longer.Comfort: Most simple handles will leave you bruised after repeatedly completing 36" fulltooth chains. This handle is nice and thick and fits the hand comfortably. My hands had a good grip on it for excellent control, but since this isn't a sliding miter jig, YOU STILL NEED TO CONTROL ANGLE AND LEVELING. The tool itself includes numerous angle reminders, including reminders on the end handles itself, so observing the correct angle is very simple.The chain truly cuts in what way? I can handsharpen a blade roughly as well as a brand-new one if I take my time on a bench with an old file. I can touch up my blade with this in my pouch in about half the time, and it works just as well when I'm less comfortably seated on the saw in the woods. I'm astonished by how much better it works considering that I still consider this to be a freehand file and I haven't acquired new hands. This makes it a wonderful file for beginners to learn on as well as a quick file for more seasoned users.Just to answer a few more queries I had prior to purchasing it...1) It DOES NOT file two teeth at once; instead, it stores two round files, one for each direction, plus a flat file for ambidextrous rakers.2) There is ONLY ONE file diameter and teeth spacing that each handle of this kind is specifically compatible with. If either of those doesn't match your chain, you "shouldn't" utilize this. With the incorrect diameter files, it won't function properly.3) Even though it uses conventional 8" round files, I prefer utilizing Pferd files because they cost just $1 per rather than using extremely cheap crap. Don't walk awkwardly.



Stihl 2 IN 1 EASY FILE CHAINSAW CHAIN SHARPENER .325" Review:


I'm new to chainsaws. Thanks to the emerald ash bore beetle, I have a lot of dead ash trees. I reasoned that by purchasing a decent chainsaw and doing the actual cutting myself, I could save some money. As the trees became more difficult to cut, I saw that the chain eventually became stuck and some of the drive links began to bend. I forced myself to read the handbook. I didn't understand that the chain needs to be sharpened or replaced because it becomes dull quite soon. Until tragedy strikes, I'm too proud to read the handbook since, as I said, I'm a rookie.When I visited the dealer, I learned that a new chain cost roughly $28. That would quickly add up. I inquired about the cost of having it sharpened. That only cost $10. I viewed various videos while online. Although there are some nice equipment that can make sharpening simpler, they can be very pricey, and since I'm a cheapskate, I was doing this myself in the first place.I purchased this file and a vice. The directions were vague and verbless, but I was able to piece them together using the information from the web movies. When you figure things out, the symbols on the file make plain what you are expected to accomplish. The first time I sharpened the chain, it took me 30 minutes, but with each sharpening after that, I got faster until I was down to around 5 minutes. The fact that one of the chain's links is green serves as a helpful cue; thus, you should begin sharpening there so you can quickly determine when you have completed the full circuit. I'm not sure when I need to change the files themselves, but I suppose I can continue using the original files as long as my chain keeps getting sharper. Today, I just finished cutting down my fourth tree, and I'm still on chain two (that first one still has bent links).



Katzco Chainsaw Sharpener File Kit - Contains 5/32, 3/16, and 7/32 Inch Files, Wood Handle, Depth Gauge, Filing Guide, and Tool Pouch - for Sharpening and Filing Chainsaws and Other Blades Review:


I purchased this package after a downed tree from a severe thunderstorm at the end of the summer gave my chainsaw an unexpected workout. When the chain in my chainsaw became too dull to use properly, I had difficulty finding a replacement because it had a chain with an uncommon pitch and size. I saw this sharpening kit while searching online, so I figured what the heck.It seemed difficult, but after viewing a video online, I was sharpening like a pro and gave that dreary chain new life. I can probably reshape it for a while if I keep being careful and don't do anything that snaps the chain.An added perk is telling my wife how I sharpen my chainsaw, which seems like difficult manly male stuff. She's not as impressed as my friends, though, and her response was, "Be careful you don't cut your finger off, did you take the trash out?"Jokes on her though, I won't lend her my chainsaw sharpening file kit since I know deep down she's envious because she doesn't have one.



Buffalo Tools ECSS Electric Chainsaw Sharpener Review:


I choose to buy this after reading the reviews. I have a mechanical background that is above average and I tend to do things myself. All of my chains have been strained recently by ice storms. I have a 10" electric pole chainsaw and an 18" Poulan Wild Thing. The depth gauge nut did not fit firmly in its recess and was not a full-sized nut when I took it out of the box. It fit considerably more snugly in the recess once the right thread pitch and size nut were discovered. To assist it insert and stay in position, I applied a small amount of silicon to it. The top of the mounting hole must be caught by whatever you choose because mounting holes are not shouldered at the bottom. I did use a couple of 5/16" fender washers to spread the pressure of the nuts below the mount, and I settled on a pair of 5/16" X 2" carriage bolts to attach it to a piece of 1/2" particle board that fit inside a drawer on my workbench.I plugged the device in and turned it on after mounting it. I must admit that the first sound did not particularly impress me. It had a slow and weak tone. As a result, I attached a chain to the sharpener and, as another reviewer advised, looked for the two similar teeth (i.e., cutters on the same side) as a starting point. in order to know you have completed the circuit. The chain link lock should then be adjusted such that it tightly grasps the drive link. By drawing out and placing the knob back in place, you can easily tighten it down more securely. You are ready to proceed once you have adjusted the depth gauge, link stop, and turntable to the proper degree setting. You are currently headed toward some sharp chains. You will go around the chain twice because I completed every other cutter before switching to the opposite direction. I intentionally went into sharpened links twice, and I must say that it was obvious I had been there before. Almost no cutting would take place.The motor didn't warrant the worries I had about it. For the circumstances, it performed admirably. It's not a bench grinder; it's a sharpener. As a kicker, I locked the turntable at a 90-degree angle and held the grinding wheel in place using a bungee cable. I chose to make minor adjustments to the depth gauge paw on the pole saw chain as it had undergone a second sharpening. I'd yank the chain out from under the grinding wheel. I was able to trim the top plate just a little bit with the depth gauge adjustment to get it back to specification. I had to give it a shot for me even though it might not be for everyone. Overall, I believe that this will be satisfactory for my purposes.Cons would include the absence of a straightforward LED worklight and the location of the on/off button, which should be on the handle by your thumb. Simple quality assurance measures include using actual nuts rather than the substitutes they were using.Pros: This tool is excellent to have in my armory due to its affordable pricing and the frequency of our ice storms, which necessitate the frequent usage of my chainsaw. All except $1.99 of the cost of the sharpener had already been covered by the four chains that I sharpened.I've now used both of my chainsaws with sharpened blades, and I'm extremely pleased with the amount of chips and shavings they are producing. see the final image.



Wevove Chainsaw Sharpener Chain Saw Blade Sharpener Fast Sharpening Stone Grinder Tools Chainsaw Teeth Sharpener for 14/16/18/20 inch Two Holes Chainsaw Review:


It works perfectly. Compared to completing it by hand, it is far faster. I used to sharpen my chainsaw by hand, but now that I have this machine, it's quick and simple and no longer a headache to go through each blade one at a time. more legitimate and effective. It is quite simple to use. I'm pretty excellent at this. Use it right away; it works incredibly well; it's worth getting. I would advise gardeners to do this.



ADINC Chainsaw Sharpener Universal Chain Saw Blade Sharpener Fast Sharpening Stone Grinder Tools Bar Mounted Chainsaw Teeth Sharpener Fit for 14/16/18/20 Inch Chain Saw Bar with 2 Holes Review:


But buyer beware—it works! This item is really useful, but keep in mind that it won't replace properly sharpening your chainsaw blade. It will work if you need a quick sharpening, but if you want your chainsaw blade to last, I don't recommend using this on it. The truth is that the correct way to sharpen a chainsaw blade necessitates a few highly specialized tools, whereas all this product does is sharpen the very outside of the blade, as I said, it will work for what you need if you're in a pinch, but otherwise I wouldn't use it frequently or you'll burn through chainsaw blades!


Does dirt dull a chainsaw?

Chainsaws are one of the most versatile tools you can have in your arsenal. They can do everything from cut down trees to trimming branches and even cutting firewood. However, one thing that chainsaws are not immune to is dirt and debris. Over time, this can start to build up on the chain and dull the blade. This can make the chainsaw less effective and even dangerous to use. So, does dirt dull a chainsaw? The answer is yes, dirt can dull a chainsaw over time. However, there are some things you can do to help

Does Stihl make an electric chain sharpener?

No, Stihl does not make an electric chain sharpener.

How long does it take to sharpen a chain saw chain?

If you're using a hand file, it'll take about 20 minutes to sharpen one saw chain. If you're using a power file or grinder, it'll take about 5 minutes.

How tight should a chainsaw blade be?

The chainsaw blade should be tight enough that it doesn't come off, but not so tight that it binds.

Is it better to sharpen or replace a chainsaw chain?

If your chainsaw chain is dull, it's time to either sharpen or replace it. How do you know which is the better option? Here are some things to consider: 1. How often do you use your chainsaw? If you only use it occasionally, sharpening the chain may be the better option. 2. How much experience do you have sharpening chainsaw chains? If you're not confident in your ability to sharpen the chain correctly, replacing it may be the better option. 3. What type of wood are you cutting

Is there an automatic chainsaw sharpener?

Yes, there are automatic chainsaw sharpeners. These devices can save you time and hassle when it comes to keeping your chainsaw sharp.