4.4/5
Double DIN radio provision
Painted matte black.Antenna adapter: 40-CR10 (sold separately)
Applications: Dodge Ram 1500 2002-2005 Dodge Ram 2500/3500 2003-2005
$234
This item precisely fit my 2002 Dodge Ram 1500 SLT, and installation was comparatively simple. It is possible to remove the original face plate without harming the remaining plastic assembly by carefully drilling a 1/4" drill bit into the plastic welds on the original face plate. Additionally, some YouTube tutorials advise you to remove the top section of the remaining component (the tiny plastic support bar); however, this kit doesn't require you to do so. Without additional alterations, it works. Additionally, in order for the double din stereo to screw in flush with the dash while being installed, you will need to carefully remove the top and middle plastic components that supported the OEM radio from the dash (Something I realized while installing mine). Last but not least, use the plastic stereo brackets included in the package rather than the ones that come with the stereo you buy because they fit the dash much better.
4.4/5
NOT A METRA KIT
$234
Has quality sound and matches the inside of a 1992 Chevy Suburban. very simple to install I had to make a small adjustment, but that was because of the radio I bought. The connector was just what I wanted. For expert installation, we advise printing the wiring diagram for the individual car radio system and soldering the wires. A tiny raised edge surrounds the storage space to stop anything from slipping out. The remote control that came with my new audio is in a perfect location. final product appears factory original.
4.3/5
BATTERY DRAIN PROTECTION SYSTEM: For our 2019 updated version, we increased our cutoff voltage from 11.6V to 11.9V to protect vehicle battery voltage from dropping below 11.9V and not starting up. It’s also suitable for 24V systems.It is recommended to turn on parking mode for your dash cam to save your battery power. Find another listing B0787LD92N if you need different or adjustable cutoff voltage.
ONE FITS FOR ALL: With Micro to Mini and Micro to Type C port converters, the kit is basically fit for ALL Dash Cams or Car Charger like NuCam DL, Wireless Charger Phone Holder Nucharger Auto, Rexing, ROAV, Zero Edge, Anker, DDPai, Papago etc. Also, it comes with most popular fuse types including Low-Profile Mini, Mini, ATO(Regular), and Micro2. It has straight mini USB adapter.
WARRANTY: One year free service for any question you are facing with this dash cam hardwire kit.
EASY INSTALLATION: Installation is easy and clean without any help from professionals! However, our customer service is also immediately responsive if you do have questions.
ENOUGH LENGTH: Overall 15ft hardwire kit can be installed basically on All vehicles. Input length: 3ft, Output length: 12ft.
$234
This was purchased as a backup camera (auto-vox). @ Best Buy had installed. This wire kit was required to bypass the cigarette lighter/power source and connect the camera directly to the automobile battery. The forward camera can only be connected to the battery option in order to record events such as burglaries or vandalism when the car is off and does not use up your car power port or force you to purchase a double power port option. If connected to the car cigarette port, as was the case with my van, the forward camera would typically only have power when the car is on. Fit the Honda Odyssey and CRV well.Another piece of advice: if utilizing the katabar wire, use an empty car fuse slot; do not piggyback with it; I did, and the automatic seat fuse blew. When used alone, it performed well. This kit connects into a fuse slot in your car and allows you to utilize an existing fuse as an extender, however my fuse blew at that same moment, so choosing an empty slot worked.Here is a description of the katabar wire that I purchased from Amazon. I purchased two, but one of them had a broken micro to mini adapter, necessitating the purchase of an additional adaptor (which Amazon assisted with). The vendor also offered me a replacement wire that ran straight to a mini USB port, but it arrived too late for me to make the necessary change. I'll have a backup adapter in case the other one ever fails; the vendor did respond and send a part to repair if necessary:Mini/LP Mini/ATO/Micro2 Fuse, Micro to Mini (and Type-C) Port Adapters, Battery Drain Protection System, and 15ft Length Cord for Dash Cameras are included in the MicroUSB
4.2/5
WIFI and GPS CONNECTIVITY: WiFi allows for you to view your recordings and change settings on your camera on the fly-- simply connect to your iOS or Android device, and everything you need is accessible easily. GPS allows for tracking and speed in videos (Optional GPS mount is INCLUDED in this bundle)
PARKING MODE by MOTION DETECTION: Parking mode is a must for any dash camera to be able to record while your vehicle is parked. The A129 is equipped with a G-Sensor and motion detection to start recording on your camera-- even when you’re not around. (Hardwiring to the vehicle is necessary to enable parking mode, professional installation recommended. Hardwiring kit and installation kit INCLUDED in this bundle)
LOOP RECORDING and 256GB MICROSD CARD SUPPORT: Loop recording ensures a “set it and forget it†installation. This allows the camera to delete the oldest footage, and replace it with your newest footage when the SD card fills up. The A129 supports up to 256GB card support.
140° WIDE ANGLE LENS and CPL FILTER: The wide angle lens in the VIOFO A129 was specifically picked to provide a wide enough angle to display 4 lanes of traffic, while also keeping optimal clarity without a fish eye effect. This bundle also includes a CPL filter for the front lens to combat lens flare/glare from the front windshield.
1080P FULL HD FRONT AND REAR DASHCAM: Sony STARVIS sensors in both front and rear cameras capture stunning 1080P FHD recordings, saving and replaying any important moments during your driving
$234
Everything is working as it should. I appreciate that it has three fuse adapters of various sizes. I have a 2013 Ford F150 with a micro fuse. The fuse box has a raised edge around each of the fuse sockets, thus the micro fuse adapter would not fit. To fit it in the socket with enough room, I had to use the micro fuse converter. The use of micro fuses was the only inconvenience. I was relieved to have some extra on hand. Although the hardwire's instructions were missing from the packaging, they can be found in certain YouTube videos. As long as the 4G wireless connection is turned off, the Wi-Fi and the app will function. The simplest method is to switch to the camera's WiFi while your phone is in "airplane mode." I'm not sure if that can be fixed or not. I'm not sure if that is a Samsung Galaxy Note 9 or a camera issue. It is annoying that I have to somehow describe how to do it to my wife. Without that, I would have awarded five stars. I was able to watch the camera's video using Wi-Fi from within my home. Even at night, the picture quality is excellent. I purchased 2 of them. Each automobile gets one. Go to DASHOTO for installation videos and a camera evaluation. Very straightforward and informative.Update: disconnect the camera and switch off WiFi if it is not responding. To sync with your phone, turn on WiFi. However, after that, turn off Wi-Fi once more. The camera's buttons are disabled by default when WiFi is enabled. A brief blue screen notifies me that I can only control the device through the WiFi connection to the phone if you enable WiFi in the settings menu rather than pressing and holding the button.
4/5
Compatible with: 2009 2010 2011 2012 2013 Ford Econoline, 2007 - 2010 Ford Edge, 2007 - 2014 Ford Expedition, 2006 - 2010 Ford Explorer, 2007 - 2010 Ford Explorer Sport Trac, 2005 - 2008 Ford F-150, 2009-2014 F-150 Base model w/no options, 2005 - 2012 Ford F-250/350, 2005 - 2007 Ford Five Hundred, 2005 - 2007 Ford Focus, 2004 - 2007 Ford Freestar, 2005 - 2007 Ford Freestyle, 2006 - 2009 Ford Fusion, 2005 - 2009 Ford Mustang, 2008 - 2009 Ford Taurus, 2008 - 2009 Ford Taurus X,
Radio Dash kit, wire harness, and antenna adapter for installing an aftermarket radio- Dash kit works with a Double din Radio- Dash kit has a black finish- Some off-brand radios might not be true Double Din Spec (slightly oversized/undersized) which means this kit will need to be modified or sanded down.
2006 - 2008 Lincoln Mark LT, 2006 2007 2008 Mercury Milan, 2005 - 2007 Mercury Montego, 2004 - 2007 Mercury Monterey, 2006 - 2010 Mercury Mountaineer, 2008 - 2009 Mercury Sable
---VERY IMPORTANT---- PLEASE READ BEFORE PURCHASE----: Some vehicles usually about 2008 and newer requires the red ignition wire of the new radio has to be run separately from the vehicle radio harness (factory radio plug has no ignition power wire)- Will not retain some features like steering audio controls, rear DVD audio, etc- extra adapters required.
$234
This package fulfilled my needs exactly. I put this in a 2005 Ford F-150 that has an Atoto A6 double din head unit. Because it's not quite plug and play, I only gave it a 4 star rating. Although the instructions on which changes plans to follow were quite clear, it still required some tools and faith to separate all the necessary parts before assembly. If you can get past your anxiety of damaging the rails, grab a pair of sturdy gloves, some safety goggles, and some sturdy pliers, and start hacking away. I didn't use the gloves or goggles, but what can I say? I'm just a stupid dude. My head unit was initially far too tight, so I had to dig out the dremel drill to refine the fit. Since I work with plastic that has been modelled for a variety of purposes, I anticipated this, and you shouldn't be surprised that some modification is always necessary if you want items to fit properly.
3.9/5
Easy to install
Designed for a vintage 1974-99 Chrysler
Designed and manufactured with precision tolerances, resulting in a gapless fit between the dash and the kit
Painted to match factory dash color
Does not damage interior
Includes a storage pocket below the radio
Install dash kit for Single DIN/ISO Radios
Made from durable and long-lasting materials
$234
I first had trouble getting this to function and fit properly in my 1995 Dodge Dakota. I eventually understood that I needed to remove some of the tabs and protrusions on the unit's rear so that it would properly mate with the dash. To remove the unnecessary tabs, I cut them off using a Zona saw, which is popular among enthusiasts who build model trains. The Kenwood radio was TOO BIG when I tried to slide it in! Please take note that this unit's final cover plate/bezel has ALREADY SNAPPED. To insert the radio, slide it in first, and then snap it back on. If you miss it the first time, don't feel too foolish about it. By the way, the internet has a fantastic step-by-step (with pictures) guide for putting a radio in a 1995 Dakota. Finding the TWO hidden screws beneath the steering wheel and removing the dash panel are definitely helpful. Dave L.
3.9/5
Attaching To a Clean And Smooth Surface To Get Maximum Holding Strength
Swivel Ball Adapter Head Provides Flexibility For Positioning The Camera
Fits Most Popular Car Dash Cam Such Like Rexing V1, V1 3rd Gen, V1P/G1W/Yi Smart Nightscape Dash Cam/Z-Edge/BlackBox/Spy Tec/Transcend/DOD/Papago/Vicovation/HP...
Adjustable neck with 360 degrees rotating holder, much better and easier to use than 3M Double-Sided Adhesive Mount Holder Bracket, no harm to car glass
package included: 2* Suction Mount(Please note ,the cameras above the photos are not included,only one piece of bracket included.)
$234
I adore how this product performs just as promised. In order to test it out and use it until I can afford a more expensive dashcam, I bought a Yi Smart Dash Camera. The Yi Smart Dash Camera arrived with a mount that employed (what appeared to be heavy duty) glue to attach to my windshield when I first opened the box. However, I have a variety of vehicles that I use for work, and I had intended to install this camera in my back window whenever I could afford a better one. I can move my dashcam wherever I want to with this suction cup mount. The suction cup's strength was the only item I was concerned about, however after unwrapping it, I quickly discovered that it is really solid and strong.
3.9/5
Attaching To a Clean And Smooth Surface To Get Maximum Holding Strength
Swivel Ball Adapter Head Provides Flexibility For Positioning The Camera
Fits Most Popular Car Dash Cam Such Like Rexing V1, V1 3rd Gen, V1P/G1W/Yi Smart Nightscape Dash Cam/Z-Edge/BlackBox/Spy Tec/Transcend/DOD/Papago/Vicovation/HP...
Adjustable neck with 360 degrees rotating holder, much better and easier to use than 3M Double-Sided Adhesive Mount Holder Bracket, no harm to car glass
package included: 2* Suction Mount(Please note ,the cameras above the photos are not included,only one piece of bracket included.)
$234
Overall, I'm happy with what I got and how it all fit in my 2015 Beetle. I don't know if it's the AVH-X390BS or the mounting panel, but I expected the radio to sit flush instead of somewhat recessed. The mounting panel's hole is only a little bit bigger than the radio. I could have changed it, but I opted to leave it as is.The wiring harness and the VW03B Speaker Connector were a perfect fit.The antenna wire just has a single input connector, not two, yet it functions just fine. It appears like an antenna is implanted in the window and splits it into two inputs, so if I'm not happy with the single, I could go back and acquire a double input.Overall, it's a decent product that fulfills my needs. Everything shown in the image is included. I'm going to attribute the fit to the radio rather than the mounting panel.
3.8/5
Kit is made from high quality ABS, harness is made from factory quality wires and connectors.
Easy to install. No special tools are required. Includes step-by-step instructions.
Backed by Scosche Lifetime Tech Support and Limited Lifetime warranty.
Includes car stereo dash kit, wire harness, antenna and connectors.
Kit is precision designed for a gapless fit, color and texture matches the factory car dash.
Direct connection to the factory wiring harness without cutting any wires.
$234
This was my first time getting auto audio gear on Amazon, so I was a little cautious at first, but it worked perfectly for my 2012 Jeep Patriot. Although the mounting material is a little subpar, it compliments the dash's charcoal gray color. The stereo I installed works as it should, and all connections were quite simple. I had to use the Dremel to notch off some of the plastic bracket since it was too deep for the Jeep's mounting place. This is significant for two reasons. You may need to remove the mounting bracket in the car if you have a double din radio with a CD player. Since mine didn't have a CD player (dead tech), it was quite shallow and only required a small portion of the plastic bracket to be sliced. 2) According to the description, this requires both a switched and a continuous 12 volt power source, thus the red wire on the harness must connect to a device that cuts off when the car is turned off (the 2012 patriot does not have one). I connected to the switched 12v source in the cigarette lighter underneath. There are some nice how-to videos online, but if you don't have any electrical background, obtain assistance. A nice purchase all around for a 2012 Jeep Patriot.
3.1/5
Designed and manufactured with precision tolerances, resulting in a gapless fit between the dash and the kit
ISO Stacked Radio Provision, Easy to use Instructions, High Grade ABS Plastic, It is compatible with Buick, Cadillac, Chevrolet, GMC, Oldsmobile, Pontiac and Isuzu Select Models
Install dash kit for Double DIN/ISO Radios
High-grade ABS plastic construction
Factory style texture
Install dash kit for Double DIN/ISO Radios
Painted to match factory dash color
$234
The double-din audio at the back of the vehicle does not receive any assistance, but the 2002 Buick Century fits just as described. In contrast to the factory stereo, which had a post protruding from the back of the unit to offer support at the back in addition to the screws at the front, this kit is devoid of such a feature. The stereo would be left hanging on three plastic tabs at the front sides of the stereo if only the kit was used to fit in the dash. To complement this kit and replicate the factory installation, I also made a little support for the rear.Although this kit performed admirably, it might not be sufficient to install your audio correctly.
COPYRIGHT © 2019