Best Brake Cleaners in 2022

Last update: January 6, 2023

Can I spray wd40 on brakes?

Yes, you can use WD-40 to clean your brakes. Just be sure to wipe away any excess and allow the brakes to dry completely before driving.

Can I use degreaser instead of brake cleaner?

There's no definitive answer, as it depends on the degreaser and brake cleaner in question. In general, however, brake cleaner is designed specifically for cleaning brake components, while degreaser is meant for cleaning engine parts. As such, brake cleaner is usually a better choice for cleaning brakes.

Can you clean brake rotors?

Brake rotors, also known as brake discs, are an essential part of your vehicle’s braking system. Over time, brake pads and shoes wear down and deposit material on the rotors that can reduce braking performance. For this reason, it’s important to clean your brake rotors on a regular basis. There are a few different methods you can use to clean brake rotors. One is to use a commercial brake cleaner, which is available at most auto parts stores. Another is to use a household cleaner such as vinegar or window cleaner. Whichever cleaner

Can you use acetone instead of brake cleaner?

Brake cleaners are designed to remove brake fluid, grease, and other contaminants from brake components. Acetone is a strong solvent that can also be used to clean brakes, but it is not as effective as brake cleaner and can damage some brake components.


CRC Industries (CRC05089) Brakleen Brake Parts Cleaner, 19 oz Can, 12 per Pack Review:


We have been using this for years to get rid of hornets and wasps. Nothing kills them as quickly as carb cleaning, which also doesn't create a greasy mess or discolor your vinyl siding. This is transparent and dissipates soon. Each can comes with a long-range straw that allows you to aim like a marksman from a far, secure distance. Best utilized at night, when no one flies away and everyone is on the nest. Even on the enormous blad-faced hornets, we remain attentive in the spring, and when the first ones appear and begin to establish a nest under the eaves, you may immediately kill them. I wouldn't try it on ground nests by shoving a coke bottle that had been partially filled with gasoline into the hole at night. Oh, and this carb cleaner is excellent at cleaning other parts as well as carbs! We always have a case available. Do don the glasses



CRC (05084-12PK) Brakleen Non-Chlorinated Brake Parts Cleaner - 14 oz., (Pack of 12) Review:


I used this to clean up an engine before a rebuild. You can buy it elsewhere for almost $9 per can. The engine was removed from an old truck that had a child as the previous owner; as a result, it was in very bad shape, covered in sludge and various types of buildup, yet it still performed admirably. Despite using protective glasses, I still got back splash in my right eye, which has been very painful for the past few hours.



Denco #1930C Brake Cleaner - 13 OZ Cans - Pack of 12 (12) Review:


I have a shop that restores vintage cars. I recently ordered a 48 pack after purchasing a case of 12. We have used a variety of brake cleaners, including the pricey material that comes in 5 gal. canisters and is used to fill spray cans. Out of everything we've tested, this is the most effective and cost-effective option. Some other cleaners smell awful and give you a headache right away. We have no problems using this brand, and we will keep buying it in the future. Thanks!



3M 8880 High Power Brake Cleaner (24 pack) Review:


This brake cleaner is excellent.It is practically used for everything by my team.When you know what it is, brake cleaner is one of those things that can be used for a zillion different things.The company has a good reputation for cleaning products. It costs a few extra dollars for a case of this than some brand I've never heard of.



CRC 20 oz 05084 BRAKLEEN Brake Parts Cleaner-Non-Chlorinated-14 Wt Oz Review:


Using this as a primer before applying AlumaHyde to paint. This thing works like magic, it appears. Cleaning the pieces is made incredibly simple by the stream that emerges. WARNING: Many different types of plastic will undoubtedly be destroyed by this. It will nearly instantly dissolve to the touch. If you intend to use this close to plastic, please use a test piece first. appears to have no harmful impact on paint or aluminum.



CRC 05089 BRAKLEEN Brake Parts Cleaner - Non-Flammable -19 Wt Oz Review:


I've been using this stuff for years and I adore it. I recently bought this from Amazon because, at the time, it was both a wonderful deal and allowed to be a "add-on" purchase. In addition to cleaning brake parts, Brakleen brake parts cleaner offers a wide range of additional applications, such as removing stains from clothing and other surfaces as well as cleaning dirt and grime from engines. It does have a strong fragrance, therefore it is best to use caution when using it and avoid inhaling the chemicals or odor it creates.TIP: Because of its strength, this cleaner should not be used on any rubber or painted surfaces. Those surfaces will be irreversibly damaged. Avoid using this cleaner on painted surfaces or rubber parts.I give it five stars.



3M 08179 High Power Brake Cleaner - Low VOC - 14 oz Review:


I never work on any project without having a can of this on hand. It can be used for anything. It even works fantastically as a pistol cleaner. I use this to clean a dirty pistol to remove 90% of the crud. For the rest, I use the pricy carbon solvents. When a quick clean is required at the shooting range, this works nicely. You are finished in JUST SECONDS. This is not near as corrosive to metal components as carb cleaner can be. Yes, Brake Clean can harm some paints and melt some types of plastic, however try acetone or carb cleaner instead and compare the results.Avoid skin contact at all costs. It will be absorbed and may result in neurological problems, although that is probably the result of frequent, intense exposure. After using, thoroughly wash your hands in soap and water. If you are worried about even a minor exposure, it is best to wear barrier gloves. At the conclusion of a greasy work, always apply an excellent hand cleaning like Go Jo with pumice. whenever your hands have come into contact with brake clean, wash and moisturize them. Though they are not always feasible, gloves are always an excellent idea. When handling this product, people with extremely sensitive skin MUST wear chemical-resistant gloves. My hands ARE quite sensitive, but as long as I wash and rinse them frequently, they will be fine. You won't understand how you managed without this product for so long once you start using it.Oh, and it does a terrific job of accomplishing what it is intended to do, which is to clean brake rotors and pads of braking fluid, grease, and road filth.



CRC Brakleen 05050 Brake Parts Cleaner - 50 State Formula with PowerJet Technology Review:


A fantastic product at a fantastic price. Even wheel bearing fissures are blasted by the jet stream action of it. When it comes to cleaning parts, this is now my go-to product. I use CRC Brakleen for the final clean after first using a degreaser on the sludged-up things. It dries incredibly rapidly after quickly and effectively dissolving grease and filth. I even applied it to the brake lines, pads, sprints, and cylinders.



VHT SP731 Real Red Brake Caliper Paint Can - 11 oz. Review:


I used this product along with a suitable primer and clearcoat, both from VHT, to paint the brake calipers on my car a shiny brilliant red color.Step 1: Using some sort of brake caliper cleaning product, remove brake dust, grease, and rust. If you can, use a wire brush as well.step 2: Use 320-grit sandpaper to sand your calipers. Really beat them. Apply extra brake cleaner after that.3) Mask off your car's wheel wells, struts, hoses, and brake rotors before moving on to the corner body panels. Spend some time covering the calipers' bleed valves as well.step 4) Apply a very thin, specked layer of primer to the caliper before moving on to the next one. Repeat this process for all four calipers. Repeat this four times, progressively adding more paint each time (it's fine if some paint runs into the primer). Try to finish this as soon as you can.step 5) Use the same technique as in step 4 to apply your base color (THIS PRODUCT): light coats several times. Instead than just spraying heavily, I advise using a sweeping technique. Ensure that the base color does not bleed.step 6) Use the same technique as in steps 4 and 5 to apply a clear layer, but take care not to go overboard. Compared to base colors, clear coatings might run more readily. By now, the paint ought to appear glossy and thick.7) Hold off for an hour. consume some beer or anything.8) Take off the masking. Look at your brand-new calipers. Then, wipe any overspray from the brake rotors or the undercarriage areas with brake cleaner. Brake cleaner should NOT be used to clean body panels since it will likely remove the paint.step 9) Reinstall your wheels. a few more hours, please. THEN, drive your automobile quickly and forcefully, being sure to brake firmly. Your brakes will heat up as a result. You need to drive and brake repeatedly in order for the paint to cure at 200oF. Don't go overboard.I'm done now! It's all done.



VHT SP730 Gloss Clear Brake Caliper Paint Can - 11 oz. Review:


I used this product along with a suitable primer and clearcoat, both from VHT, to paint the brake calipers on my car a shiny brilliant red color.Step 1: Using some sort of brake caliper cleaning product, remove brake dust, grease, and rust. If you can, use a wire brush as well.step 2: Use 320-grit sandpaper to sand your calipers. Really beat them. Apply extra brake cleaner after that.3) Mask off your car's wheel wells, struts, hoses, and brake rotors before moving on to the corner body panels. Spend some time covering the calipers' bleed valves as well.step 4) Apply a very thin, specked layer of primer to the caliper before moving on to the next one. Repeat this process for all four calipers. Repeat this four times, progressively adding more paint each time (it's fine if some paint runs into the primer). Try to finish this as soon as you can.step 5) Use the same technique as in step 4 to apply your base color (THIS PRODUCT): light coats several times. Instead than just spraying heavily, I advise using a sweeping technique. Ensure that the base color does not bleed.step 6) Use the same technique as in steps 4 and 5 to apply a clear layer, but take care not to go overboard. Compared to base colors, clear coatings might run more readily. By now, the paint ought to appear glossy and thick.7) Hold off for an hour. consume some beer or anything.8) Take off the masking. Look at your brand-new calipers. Then, wipe any overspray from the brake rotors or the undercarriage areas with brake cleaner. Brake cleaner should NOT be used to clean body panels since it will likely remove the paint.step 9) Reinstall your wheels. a few more hours, please. THEN, drive your automobile quickly and forcefully, being sure to brake firmly. Your brakes will heat up as a result. You need to drive and brake repeatedly in order for the paint to cure at 200oF. Don't go overboard.I'm done now! It's all done.


How do you clean brake dust off of brakes?

Brake dust is a combination of brake pad material, metal shavings, and road debris that gets stuck to your brakes and wheels after braking. While it may not seem like a big deal, brake dust can actually be quite harmful to your car. Not only can it cause your brakes to wear down faster, but it can also lead to rust and other damage. Luckily, there are a few easy ways to clean brake dust off of your brakes. One of the simplest methods is to use a damp cloth or sponge to wipe it away. You can also use a commercial brake

How do you clean brakes without removing tires?

If your brakes are making noise or not working as well as they used to, you may need to clean them. You can clean brakes without removing tires by using a brake cleaning kit. This kit will come with a brush and cleaner that you can use to clean the brakes.

How long does it take for brake cleaner to evaporate?

Brake cleaner is a volatile product, meaning it evaporates quickly. Most brake cleaners will be dry to the touch within minutes.

How long does it take for brake cleaner to work?

Brake cleaner is a product that is used to clean the brakes on a vehicle. It is a fast-acting cleaner that can remove brake fluid, grease, and other contaminants from the brakes. Brake cleaner is available in aerosolized cans, and can also be purchased in bulk containers.

How often should you use brake cleaner?

Brake cleaner is a great way to keep your brakes clean and free of debris. However, you should only use it when absolutely necessary. Overusing brake cleaner can damage your brake pads and rotors.

Is it OK to spray brake cleaner on pads?

It's not a good idea to spray brake cleaner on your pads. The chemicals in the cleaner can damage the pads and make them less effective.