You can use galvanized steel wire for bonsai, but it is not the best option. The zinc coating can flake off and be harmful to the tree.
You can use solder wire for bonsai, but it is not the best choice. It can be difficult to control the heat when using a soldering iron, and this can damage delicate bonsai leaves and branches. If you do use solder wire, be sure to use a low-temperature setting and apply the solder quickly.
To promote branch growth on your bonsai, start by pinching back new growth to 2-3 leaves. This will cause the plant to grow laterally rather than vertically. Next, be sure to prune any dead or dying branches back to the trunk. This will encourage the plant to focus its energy on healthier growth. Finally, fertilize your bonsai regularly with a high-quality fertilizer designed for use on flowering plants. This will provide the nutrients needed for strong growth.
4.8/5
147 FEET OF WIRE: 75 feet of 1.0mm, 34 feet of 1.5mm, 18 feet of 2.0mm, 12 feet of 2.5mm, and 8 feet of 3.0mm. Each roll is 50g. This pack comes with 5 rolls total.
THICKNESS VARIETY: Comes in 5 most popular sizes - 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm - so you have a variety of sizes on hand to fit your branches of different thicknesses. All wires are labeled with their sizes to easily distinguish them.
COMBINE WIRES: Double wrap wires of smaller gauges in parallel to create additional strength varieties you need for your thickest branches.
EASY TO BEND: Anodized aluminum training wire is easier to bend than copper yet still very strong, making it better for beginner bonsai trainers and convenient for experienced bonsai artists.
CHOOSE YOUR COLOR: Available in standard black, brown to blend in with your bark, or green to match your leaves. All colors are anodized. Choose your preference!
$234
Aluminum-coated Bonsai Training Wire (Grow a bonsai tree) The wire I have is half hard, and I do carry the lower sizes of anodized wire that these people sell. It's easy to use with even in the larger diameter and cuts well, but it's not strong enough for this purpose. The wire is iodized, making it less likely to oxidise, and the colour complements the majority of my plants.
4.8/5
Premium quality aluminum bonsai wire that will not rust or corrode. Easy to shape and train any Bonsai plant type, reusable and easy to apply.
These high quality Japanese training wires are designed for shaping and holding branches and small trunks inconspicuously.
Direct from BonsaiOutlet.com, the Internet's largest Bonsai retailer, Money-Back Satisfaction Guarantee.
Easy to bend. Anodized aluminum training wire is much easier to bend compared to copper. Aluminum training wire is much better for beginner Bonsai artists.
Genuine Japanese Quality Bonsai training wire for small or large Bonsai trees. Easy to manipulate wire that will not damage trees or any plant.
$234
The lovely folks at Bonsai Outlet are aware of the aesthetic and spiritual significance of individuals who practice the art of bonsai as a result of Ashley's outreach (owner). Consequently, I rate the seller highly.I'm new to the medium and have inherited a few of my father's close associates with whom he spent the last 30 years working. He frequently used copper wire, which I suppose has some traditional advantages, but I believe the dark color will improve the appearance of your work significantly.
4.6/5
✔Package Included: Bonsai Wires x 4 pcs (Green Bonsai Wire x1, Black Bonsai Wire x3) 128 Feet Total, Bonsai Wire Cutter x 1 pcs.
✔Bonsai wires are made of aluminium alloy with oxidise treated. The coating is not easy to peel off at all with high quality to confirm rust free in long time. No any bad chemical smells to keep your healthy.
✔Bonsai Tree Training Wires is flexible and strong enough and will not damage trees or any plant, There is no problem to bend and twist many times.
✔Three different Bonsai Wires popular size: 1.0MM, 1.5MM, 2.0MM to meet your different requirements, and Cutting Pliers can cut the thick Bonsai Training Wires.
✔Bonsai planting not only to give you many different interesting in daily life but also has the function of influencing sentiment and purifying mind.
$234
To begin with, I have no idea what I'm doing with this, but I have so many seedlings in the yard that I decided it would be preferable to just ripping them out. Instead, I'm experimenting with cedars and maples that I've planted in small plastic pots. Please bear that in mind.All of these wires have very small gauges. A branch that is less than 1/4" in diameter is difficult for even the thickest to maintain its shape. It does help to double up. Other than that, it's operating normally. Although I do believe I'll need some thicker wire, this is undoubtedly not a result of any flaws in the product. On every wire, the wire cutters function flawlessly. They are not intended for trimming, but they also work well for some trimming. I would upload pictures, but I don't want my peculiar effort to detract from the caliber of the finished article. To prevent my wife from tossing away the trees from my disaster project, I actually have to hide them.The stuff is excellent. Simply put, I'm terrible at this activity.
4.6/5
375 FEET OF WIRE: 250g of 1.0mm gauge wire translates to 375 feet (114.3m) of wire. Thin gauge ideal for use on your smallest branches.
CHOOSE YOUR COLOR: Available in classic black, or brown to blend in with your bark. All colors are anodized. Choose your preference!
INDIVIDUAL ROLLS: 250g of wire so you can stock up on exactly the size you need. Replenish your Grow A Bonsai Tree Starter Set wire or supplement your existing wire supply using these large rolls.
EASY TO BEND: Anodized aluminum training wire is easier to bend than copper, making it better for beginner bonsai trainers, convenient for experienced bonsai artists, or great to use as floral wire. Reuseable, and will not damage your tree.
QUALITY WIRE: Grow A Bonsai Tree's anodized aluminum wire is easy to work with, holds its shape, is resistant to corrosion, and comes in your choice of beautiful colors designed to blend in with or complement your tree.
$234
I purchased this wire to secure a dogwood tree that I had to dig up from the ground and plant in a large container because it was unhappy in its original location. It is around 6 feet tall, 6 years old, and has very straight but flexible branches. Just a little bending will do to pull the branches forward for the spring blooming. I've included pictures of what I'm trying to do as well as one in which I've placed a branch in my little finger to demonstrate how small it is—about 1/2 inch or so. The wire is 2.5 mm in diameter, copper in color, and incredibly flexible. I'm pretty new to the bonsai hobby, but it's easy to get hooked. I definitely recommend viewing the many available YouTube videos on it for learning because I have learned a lot from them. The seller shipped the item quickly and fairly, and everything was wonderful. I appreciate you and hope this helps.
4.6/5
Enjoy your life: this tree training wires can be applied for potted plants or plant decorations, not only to bring many different pleasures to your daily life, but also to exercise your hands-on and practical skills
Assorted colors: the black, brown, and green color of bonsai wires can be mixed with bark or matched with leaves; You can choose a different match color according to your personal preferences
Good material: the anodized alumina wire is very flexible, easy to bend and very rugged, suitable for beginners bonsai trainers and experienced bonsai artists
Characteristics: these aluminum bonsai training wires can be bent repeatedly, not easy to rust, not easy to break, can be repeated to use, better than other copper wires or iron wires
Package contents: you will receive 9 rolls of bonsai training wires with 3 sizes (1.0 mm, 1.5 mm, 2.0 mm), so you can do different combinations according to your personal color preferences or the size of the trunk
$234
My very first bonsai was this one. I utilised a viburnum shrub that I had in a very large pot. I watched a lot of videos on YouTube since there are so many kind people there, and you can learn a lot. Everything a beginner may need is included in this cable. I strongly advise. I believe I generally used 2 mm black and lower sizes depending on the branch for the bush. It is incredibly healthy, and I did it about a month ago. I've included before and after pictures of the bonsai bush. Hopefully, this was helpful. Seller is prompt and the item is exactly what he describes. I'm grateful.
4.6/5
Bonsai wire is made of aluminium alloy with oxidise treated.The coating is not easy to peel off at all with high quality to confirm rust free in long time.No any bad chemical smell to keep your healthy.
Three different popular size : 1.0MM,1.5MM, 2.0MM to meet your different requirement.
The bonsai wire is flexible and strong enough.There is no problem to bend and twist many times.Not breaking at all.
3-year quality guarantee when used under normal conditions.
Bonsai planting not only gives you many different interesting in daily life but also has the function of influencing sentiment and purifying mind.
$234
When you require a different gauge, this wire is nice. In other words, to save money, purchase large rolls. In addition to utilising it on bonsais, it's useful to have on hand for a variety of strange occurrences. Very flexible to say check to make sure the Christmas tree's bubble light is not pointing to the South pole rather than the North.
4.5/5
softer than copper; will not damage tree
approx lentgh: 387 feet
size: 1mm
copper coated aluminum wire; dark brown in color
250g roll
$234
fantastic stuff I'd buy once more. The product is packaged for shipping in a small box within a larger box when it is received. At first look, I feared I had been duped, but after opening the package, I quickly saw I had actually received the exact items listed—just incredibly small spindles of wire. Bonsai may be an expensive pastime, so when money can be saved by finding deals like this one, bonsai enthusiasts like myself are happy! I've only found the cheapest wire per foot so far; this is my second year in the hobby. If you have a strong interest in bonsai, I would suggest purchasing this wire set. The rationale behind this is because buying in bulk will result in long-term savings on this bargain. Wire is easily bent and sliced. On a mugo pine, I used it.
3.5/5
Thickness variety: Three dif size in the pack, including 1.0mm, 1.5mm and 2.0mm diameter, around 32 feet in each roll. This Bonsai tree training wire serves your purpose on the different sizes you wanna experiment.
Making a bonsai is more interesting than appreciate it. Lashing is an important part of the production of bonsai tree, do it yourself start from the wire selection.
Boncas Bonsai wire's color blends well with most bark, and doesn't cause difference in visual effects like some bright wire. This product will not damage bonsai or trees, but don't forget to take it off the branches after the limbs are set.
Easy to use: This Bonsai training wires are excellent to wrap around the branches and trunk, and hold Bonsai's shape well.
High quantity: Boncas Bonsai Wire is make by top grade Aluminum wire, the coating will NOT rub off or rust. It's soft enough to bend many times, reusable and environment-friendly.
$234
It goes well after you get used to the "feel" of the wire. Both rigid and flexible, readily fitting onto the delicate small tree. A good range of sizes, to have on hand or to utilise for a small number of trees. I will be ordering the medium size in a much longer length because I have an entire up and coming forest. This allowed me to trial before buying a lot. Will suggest.
To thicken your bonsai trunk, you will need to encourage growth in the lower and inner areas of the tree. This can be done by pruning the tree carefully to direct growth where you want it, and by fertilizing regularly. You may also need to repot the tree every few years to encourage new growth. With patience and care, you can create a beautiful, thick bonsai trunk.
To curve a bonsai trunk, you need to first find a branch that is the desired thickness and shape. Cut the branch off the tree, and then remove the bark from the branch. Next, you will need to soak the branch in water for a few days. After the branch has soaked, you can then start to bend it into the desired shape. Once the branch is in the desired shape, you can then use wire to hold it in place.
First, find a branch that is the desired thickness for the trunk of your bonsai. Cut the branch just above a node, or where the branch meets the trunk. If the branch has leaves, they can be removed. Next, use wire to shape the branch. Start at the base of the branch and wrap the wire around the branch, working your way up. The wire should be tight, but not too tight, as you don't want to damage the branch. Once you reach the top of the branch, twist the wire a few times to secure it.
To speed up bonsai growth, you need to provide the tree with the right amount of sunlight, water, and nutrients. You also need to prune the tree regularly to encourage new growth.
To start training a bonsai tree, you will need to find a tree that is the appropriate size and shape for the style of bonsai you wish to create. Once you have found your tree, you will need to prune it to the desired shape. Once your tree is pruned, you will need to wire it to hold it in place. Finally, you will need to place your tree in a pot.
I generally leave the wire on my bonsai tree for about one growing season. This allows the wire to really shape the tree the way I want it to. After that, I carefully remove the wire so that it does not damage the tree.
COPYRIGHT © 2019