Best Bathtub & Shower Diverter Valves in 2022

Last update: January 8, 2023

Can a shower diverter cause a leak?

If a shower diverter is defective or installed incorrectly, it can cause a shower leak. The diverter is responsible for directing water from the showerhead to the tub spout. If it is not functioning properly, water can leak from behind the wall and cause damage to the surrounding area.

Can diverter valve be cleaned?

A diverter valve is a type of valve that is used to divert water from one pipe to another. Diverter valves can become clogged over time and will need to be cleaned in order to work properly. You can clean a diverter valve by disassembling it and using a brush to clean the inside of the valve.

Can I replace shower diverter valve?

If your shower diverter valve is old or broken, you may be wondering if you can replace it yourself. The answer is yes, you can replace a shower diverter valve, but it is not a simple task. You will need to have some plumbing experience and knowledge to do the job correctly. If you are not confident in your abilities, it is best to hire a professional to do the job for you.

Can you adjust a diverter valve?

A diverter valve is a type of valve that is used to control the flow of liquids or gases. It is often used to redirect the flow of fluids from one pipe to another. Diverter valves can be manually operated or they can be operated automatically.


Shower Arm Diverter Valve for Hand Held Showerhead and Fixed Spray Head,G 1/2 3-Way Bathroom Universal Shower System Replacement Part/Brass (Brushed Nickel) Review:


This is a fantastic device!The diverter in the two-head Old Anna Bath system failed after roughly 6 years. The first one was made of plastic.But this new one is made entirely of metal. The lever rotates without making a clucking noise like the old one did.For the simple shower head, I had to stack some of the extra washers that were provided since otherwise, it would bottom out before seated. This wasn't that bad because it gave me the opportunity to adjust the gap for aesthetic purposes.To position the hose on the other side of the shower, I purchased one with a longer handle. The female portion of that hose threaded on without the need for washers because it was shallow as opposed to deep like the head.I avoided digging in the garage thanks to the Teflon tape that was provided.completed it in 5 minutes. high caliber.I did not detect any pressure decrease and did not anticipate doing so. You can remove the reducer to boost flow, but considering how much water is already flowing, I'd recommend leaving it in.



EZ-FLO 10789 Self-Closing Shower Valve with Pull-Chain, 1/2-inch FIP, Chrome Review:


Effective as a valve for a home urinal. No 3/4" supply pipe is required. I'm not sure if it would have sufficient support for usage in commerce.Purchase a 1/2" short nipple, a threaded reducer adapter to reduce the urinal spud to 1/2", a flexible supply line, and the items mentioned above. This adapter was what I used: https://www.amazon.com/gp/product/B00835W80E/ref=oh aui detailpage o04 s00?ie=UTF8



KES Brass Shower Arm Diverter Valve for Handheld Shower Head and Fixed Shower Head Universal Bathroom Shower System Replacement Component Chrome, PV14-CH Review:


I genuinely adore this item. In the case of the one I had, you had to lift up using a "handle" that was tricky to grasp (especially if your hand or the handle was wet), and it got VERY challenging. To get it to draw up, I occasionally had to turn the water off. So I started looking for something simpler, perhaps one with a ring you could hold. When I came across it, I bought it right away. IT IS AMAZING! Switching from the old one to the hand held is considerably simpler.On mine, there is a shower head extender.https://www.amazon.com/gp/product/B00SZDCCD2/ref=ppx yo dt b search asin title?ie=UTF8



Pfister 9510390 Avalon/Marielle/Treviso 26 Series Diverter Review:


I find it hard to believe how easy the remedy was. I recently moved into a new home, and the ONLY sink that had low water pressure was the kitchen sink (a Price Pfister Treviso 26 series stainless steel model). The seller and even a plumber (who had to come for another reason) were unable to diagnose the issue. I said, "Hell no," when he said, "Well, you can pay me $150 to take your sink out and figure it out." Because other individuals were encountering problems, I turned to the internet (and phoned Price Pfister). Praise the Lord. Installing this was quite simple. Water was turned off, I watched a video on how to unplug the old one, I connected it, and VOILA! I had good water pressure. My sink was at a loss as to what to do. It had never before experienced such pressure. "A whole new woooorld," it began singing. So yeah, it functions.



Brass Shower Arm Diverter Valve for Hand Held Showerhead and Fixed Spray Head,G 1/2 3-Way Bathroom Universal Shower System Replacement Part(Polished Chrome) Review:


I purchased this item so that I could upgrade my parents' existing shower head to include a handheld shower wand. The stuff is excellent. I am 58 years old and have never worked in the plumbing industry. By the time the diverted arrived, I was confident in my ability to complete the task after watching a few of the films. It took me ten minutes to install it without any issues. The item is a well-made, strong, and weighty product. To stop leaks, I figured I might need to adjust it with more Teflon tape or rubber washers. That wasn't the situation. Everything went perfectly. At the same time as installing the shower head, I also installed the handheld shower wand I bought from Amazon. Additionally, it was nicely constructed, substantial, and strong. Neither product has leaked. Anyone can accomplish it if I was able to complete it on my own without assistance. The products' high quality, in my opinion, helped make installation simple. Additionally, additional rubber washers were added in case reinstalling an extremely old shower head led to a minor leak. Just in case, I used the extra washers. Prior to applying the new Teflon tape, make sure to remove any old Teflon tape. My parents' old shower head's restrictor was also removed. They claimed that their ancient showerhead, which had been without pressure for twenty years, almost knocked them over. They cherished it. While reading about shower heads, I came across the restricter. You can find several videos online that demonstrate how to do this. About 5 seconds pass. I heartily endorse this item. The diverter and the handheld shower wand I bought for my parents impressed me so well that five days later, I bought them for myself.



MOEN 2510 Posi-Temp(R) 1/2" Ips Connection Includes Pressure Balancing, 0.5, Unfinished Review:


It has taken me a while to review this, but it took us a while to upgrade our bathroom. The plumbing in our bathroom was still dated from the 1930s and had only been minimally renovated. Since neither my husband nor I had ever renovated anything before, we decided to take on the project ourselves. He just knows what he has learned about plumbing since we bought our house, so this was all new to him. I'll admit that this thing appears more daunting than it really is. The diverter—as we have come to refer to it—was installed without any hassles or problems by my husband after he finally reached the point where he could no longer postpone doing so, maybe 15 to 30 minutes after all the pipes had been run. If a newbie can put this thing in, it is therefore not difficult to do. I'm so proud of him. Our house is currently modern. No leaks are present. The best part is that he no longer gets scaled, and I can run water in the kitchen. If I could, I would give this item a better rating. I heartily endorse it.



Delta R11000 3/6 Setting Diverter Rough Review:


I bought Brizo lighting. Brizo valves were needed for them. These valves are twice as expensive as those ones. On the Delta and Brizo websites, where they break down these valves part by part, I looked up the pieces. They are the same.Get Delta valves and save money. It's outrageous that they make you pay twice as much for packaging alone.



Delta Faucet RP17730 Diverter Assembly Review:


A similar part cost me $13 at ACE Hardware. About half of this was OEM. The ACE replacement was ineffective. It was oversize. I was unable to turn it. My handle was becoming damaged. Although it was difficult to install, it was successful. a few days later. Great results. For this product, choose OEM.



Kohler K-8304-K-NA Universal RITE-Temp PB pressure-balancing valve body and cartridge kit, 6.25 5.25 5.50 Review:


If it weren't for the instructions, which were so unclear and deceptive, I would have given a five-star rating. I installed the valve before the shower wall was put up, but once it was, the measurements stated on the instructions were incorrect. Fortunately, the back wall was still open, so I was able to move the valve further into the hole. Don't just rely on the instructions; do your own research online; it will be very helpful. In addition, the valve functions nicely; I just wish it would last a long time.



Hansgrohe 4447000 S Pressure Balanced Valve Trim with Integrated Diverter, 5.51 x 7.75 x 10.75 inches, Chrome Review:


The Hansgrohe iBox rough-in valve is intended to be placed along with this valve trim. The iBox offers a very clever method for rough plumbing a shower once you understand the confusing instructions. It is easily adjustable and has service stops so you can test and flush the system before the walls are built. The appearance of almost all valve trim models is quite modern, which is a drawback for bathrooms that are more traditional or understated. For a client who wanted a hand shower in addition to an overhead rain shower, I installed this diverter trim. It was the finest choice available at this price point. The knobs are well-made, but despite this, I discovered that they operate less smoothly than I would anticipate and with a bit too much friction. Last but not least, the anti-scald stop is a pain, like most shower valves these days; do yourself a favor and just remove it completely before installing the trim components.


Do you have to turn off the water to change a diverter?

No, you don't have to turn off the water to change a diverter. You can do it while the water is running, but it's easier to do it when the water is off.

How do I know if my diverter valve is faulty?

If your diverter valve is faulty, you may notice a decrease in water pressure, or water may not be flowing from your taps at all. You may also notice leaks around the valve. If you suspect your diverter valve is faulty, you should contact a qualified plumbing professional for an inspection and repair.

How do I know what shower diverter I have?

To know what type of shower diverter you have, start by looking at the shower arm where it meets the wall. If the shower arm is threaded, you have a screw-on diverter. If the shower arm is held in place with a set screw, you have a slip-on diverter. If the shower arm is soldered to the wall, you have a soldered-on diverter.

How do you clean a clogged diverter valve?

If your diverter valve becomes clogged, you can clean it with a few simple steps. First, remove the diverter valve from the faucet. Next, use a small brush to clean the valve seat and the area around it. Finally, flush the valve with clean water to remove any debris.

How do you divert water from tub to shower?

To divert water from your tub to your shower, you will need to purchase a diverter valve. This valve will allow you to control the water flow from your tub faucet to your shower head.

How do you replace a tub diverter valve?

If your tub's diverter valve is broken or damaged, you'll need to replace it. Here's how: 1. Turn off the water to your tub. This will prevent any accidents while you're working. 2. Remove the old diverter valve. This will be attached to the water line coming into your tub. 3. Install the new diverter valve. Make sure it's tight so there are no leaks. 4. Turn the water back on and test the new valve.