If you're a drummer, you know that new drum heads make a difference. They give your drums a brighter, fuller sound and help you to play with more precision. When you're ready to replace your old drum heads, be sure to check out the selection at your local music store. You'll be amazed at the difference new drum heads can make.
Bass drums are one of the most important pieces of a drum set, but their booming sound can sometimes be overwhelming. There are a few ways to deaden a bass drum sound, depending on the desired effect. One way to deaden a bass drum sound is to add a piece of furniture padding to the inside of the drum. This will help to absorb some of the sound and prevent it from being as loud. Another way to deaden a bass drum sound is to add a pillow or blanket inside the drum. This will help to muffle the sound of the drums and
Drums are one of the most important instruments in a band. They set the tempo and keep the beat. But how long do they stay in tune? Drums are made of wood, metal, and plastic. They have many parts that can loosen or tighten. The tension of the drumhead and the tuning of the lugs can change with temperature and humidity. So, drums can go out of tune quickly. Most drummers tune their drums before each gig or practice. But, if you're playing in a band, it's a good idea to tune your drums
Bass drum skins, or drum heads, are made from animal skin or synthetic materials. They are stretched over the top of the drum shell and held in place with rings. The skin vibrates when the drum is hit, producing the drum's sound. Drum heads can last for many years with proper care. Animal skin heads should be kept moist to prevent drying and cracking. Synthetic heads are less likely to dry out, but can develop build-up from drumsticks and other debris. Regular cleaning with a mild detergent can help extend the life of both types of heads
4.7/5
VENT HOLES – The HD Dry features small precision-drilled vent holes around the edge of the drum head that eliminate stray harmonics, control sustain and tighten the sound.
MADE IN THE USA - For over 60 years, Evans has been a pioneer in drum head manufacturing and design. Regarded for high quality and consistency all Evans drumheads are proudly designed, engineered, and manufactured in the USA to the most stringent quality controls in the industry.
OVERTONE CONTROL – A 2mil overtone control ring on the underside "floats" with the head, eliminating excessive overtones and controlling sustain. This snare drum head barks live yet is ideal for the studio.
TWO PLIES OF FILM – The 14†Evans Genera HD Dry coated snare drum head is made using two plies of film, a 5mil outer ply and a 7.5mil inner ply, that yields an aggressive rimshot and balanced response.
LEVEL 360 TECHNOLOGY – A Level 360 collar allows the white snare drum head to seat itself properly and in turn provides a head that is easier to tune and a wider tonal range for a sound that is studio ready.
$234
AWESOME snare head! For my snare drums, I had been using Remo Ambassador Coated for years. But I was seeking for an enhanced head sound to round off my "new" drum because I had just finished restoring, upgrading, and personalizing an old, deep metal snare drum. I ordered this head after doing some research. Wow!! I could immediately tell that this head was better made and of higher quality when I pulled it out. It tuned up so quickly and effortlessly once it was on the drum that I felt foolish for sticking with Remo all those years.I adore the BIG sound that this snare head produces. It maintains its crispness, responsiveness, strength, and versatility for a variety of sound-styles long after most drum heads have worn out or become "flabby." I perform in three distinct bands, each of which requires a different playing style or sound, ranging from a bright ring-y boom to a heavy-dark boom. This amazing head handles everything! It endures constant use and damage and simply keeps working without losing its fantastic sound. Since there isn't really any noticeable change in their sound or response, it's even difficult to tell when to replace them! I ultimately changed this head because, in my regular usage, I would have gone through two or three Remo heads by that point and thought perhaps I ought to. And, get this, I removed the old head and handed my friend's guitar for his home "thrasher" set, and the guitar is still going strong and sounds fantastic. Amazing! I heartily endorse these. Try these out if you're still using the same vintage snare heads and want to modernize your sound.
4.7/5
MADE IN THE USA - For over 60 years, Evans has been a pioneer in drum head manufacturing and design. Regarded for high quality and consistency all Evans drumheads are proudly designed, engineered, and manufactured in the USA to the most stringent quality controls in the industry.
AVAILABLE IN 5 SIZES – Evans EMAD2 clear bass drum heads are available in sizes 18†to 26†with multiple thickness and coating options.
FOR ALL MUSIC GENRES – The EMAD2 bass drum head is extremely versatile for all music genres. A true working drummer’s choice, the adjustable damping caters to all bass drum tones.
EMAD SYSTEM– The Evans Clear Bass Drum Head has an externally mounted adjustable damping system to control the attack and focus of the drum head by choosing one of two removable foam rings. The 22†drum head has an outer ply of 7mil and an inner ply of 10mil film for added durability.
LEVEL 360 TECHNOLOGY – A Level 360 collar allows the clear bass drum head to seat itself properly and in turn provides a head that is easier to tune and a wider tonal range for a sound that is studio ready.
$234
I adore this bass drum head so much. You receive two unique muffling rings (i use the wider of the two). The best aspect is that you can stop the ringing without stuffing blankets or pillows within the bass drum. Evans bass dampener is something I do have. On my reso head, though, I placed the lesser portion. I play in a metal band, but I didn't need to use the patch. So I get the click that most metal drummers have to subsequently EQ in when I use plastic beaters. With this bass drum head, I'm not only able to have fantastic low-end; I can also change the muffling ring to a smaller one for extra resonance. Evans is excellent for assault and quite simple to adjust. Even though I don't have to, I still use a drumdial to guarantee uniform tension around the head. They fit snugly, and none of the adhesive on any heads has ever come off (unlike other brands). Additionally, I adore the sound it makes.
4.7/5
OVERTONE CONTROL – A 2mil overtone control ring on the underside "floats" with the head, eliminating excessive overtones and controlling sustain. This snare drum head barks live yet is ideal for the studio.
MADE IN THE USA - For over 60 years, Evans has been a pioneer in drum head manufacturing and design. Regarded for high quality and consistency all Evans drumheads are proudly designed, engineered, and manufactured in the USA to the most stringent quality controls in the industry.
LEVEL 360 TECHNOLOGY – A Level 360 collar allows the white snare drum head to seat itself properly and in turn provides a head that is easier to tune and a wider tonal range for a sound that is studio ready.
TWO PLIES OF FILM – The 12†Evans Genera HD Dry coated snare drum head is made using two plies of film, a 5mil outer ply and a 7.5mil inner ply, that yields an aggressive rimshot and balanced response.
VENT HOLES – The HD Dry features small precision-drilled vent holes around the edge of the drum head that eliminate stray harmonics, control sustain and tighten the sound.
$234
Since I've been playing the drums for about 30 years, this is my go-to all-purpose snare head since it's so simple to tune and strong enough for jazz, rock, and other styles. I really feel that the current Evans manufacturing method yields the most consistent and level drum heads ever created, and this is the exact drum head that converted me to an Evans believer after using numerous Remo and Aquarian heads over the years.Due to the floating underneath ring and vent holes, this head has very few overtones, but for recording and other close-mic situations, a tiny bit of moon gel is all that is needed to thoroughly dry it out. For brush playing, it is delicate and articulate enough, and when necessary, it is focused and cutting. This head provides a lot of "head-room" and is quite dynamic for a 2-ply head; I saw at least one review here that claimed it was too loud, but (to me) that just means I have a lot more volume control with my hands and sticks.I've gone through a lot of these heads over the years, and I'll keep buying more as I use them because they're so great.
4.6/5
Available is sizes 6" - 24"
Durable 1-ply mesh
Ideal for apartments, condos and dormitories
The ultimate in low volume drumheads
Works well with external electronic triggers
$234
was too big for my PDP 18 "ground tom.All other sizes, including 8", 10, 12, 13, 14, 16, and 22, fit true."NOTE: These drum heads will work and will outperform all other competitors on durability and playability if you're looking to turn down the sound or silence your drum set. Strong mesh fabric as opposed to thin "nylon pantyhose" fabric used by competitors. Additionally, it keeps a highly accurate "real feel" playability and offers the option to tune up or down for greater tonal control.However, I compared the sound these heads make to that of hitting a pillow of air if you feel them to be "too silent." NOT ALL IS LOST.MY RECOMMENDATION Purchase some REMO MUFFLE HEADS and set them up on top of your shell, immediately below the REMO SILENTSTROKE mesh heads. This creates a micro batter or muffle right below the mesh head that captures air rebound and preserves the original quality of your drum shells. After noticing that the silentstroke heads were too quiet and more like a practice pad, losing all of the flavor of my drum shells, I came up with this technique. I tried everything, including drum patches and duct tape, to muffle the heads just enough so that I could hear part of the tonal acoustic sound of my drum shells while also turning down the volume.Try putting the Remo Muffle heads underneath the silentstroke heads if you find that they are too quiet on their own when you employ the natural acoustic response, and watch your drums spring to life once more. Great results for me. TRY IT!!For informational purposes only, when playing loud, I also use EVANS black hydraulic heads for my resonant heads and batter heads. These heads are excellent for problematic drums.Since I also prefer black heads, I covered both sides of the mesh heads with a Sharpie MAGNUM (waterproof) marker in black and colorado. Works flawlessly!I HOPE THIS ASSISTED ANYONE WHO WAS CONSIDERING A PURCHASE OR WHO FELT THESE HEADS WERE TOO SILENT.
4.6/5
Clear super-kick II
Two 7mil plies
Full low end sound
Built in floating felt muffle ring
No extra muffling needed
$234
I wanted my bass to have a good, powerful, low tone. I'm playing this on a Gretsch Catalina Maple 7-piece kit. I'm not sure if it's because of the great quality, no port, and 30 degree bearing edge of this batter head, but my bass does not require muffling. It offers a powerful sound and no ringing noise that needs to be muffled. Because I can tune my bass and toms so low, I like Evans drum heads for those instruments. However, after hearing this bass drum head, do you think I should also try Aquarians' tom head lineup? I'm astonished at how well the head endured without becoming completely marked up before I had a bass drum patch installed. The Evans EMAD2 bass drum head I previously owned sounds fantastic. I'm reminded of the EMAD2, but without the plastic headband with the foam ring insert.
4.6/5
The ultimate in low volume drumheads
Available is sizes 6" - 24"
Works well with external electronic triggers
Durable 1-ply mesh
Ideal for apartments, condos and dormitories
$234
This head really rocks! It is not only exceedingly quiet, but it is also very robust. The question "Will it hold up under my sticks?" is frequently asked. Yes, it is the answer. This head has been on my snare for more than a month, and so far, it has not even displayed the tiniest indications of the typical wear and tear that a standard head would experience. Because it is so quiet, I find it difficult to pound the drum approximately three times as hard as I normally do. To get a louder sound, my ears instruct me to pound the drum harder. However, despite all of my severe hits over the course of the past month, this head has held up incredibly well. The heads have tremendous rebound and are quite sensitive. One benefit of these heads is that they have fewer overtones than a typical head would. On these babies, overtone killers are not necessary. You should be aware that chewed-up sticks will cause these heads to tear, so I advise using nylon-tipped sticks. Although these heads were designed for practice, I have discovered that they also work nicely in a studio setting. These drum heads are a top-notch item.
4.5/5
The 4" offset mic port features a plastic sleeve focuses pitch and enhances the attach while providing protection for the port
All Evans drum heads are designed, engineered and manufactured in the USA
22" resonant drum head made using a single ply 7.5mil film
The perfect resonant head for use with the EMAD series batter heads
$234
Excellent tone and low end are features of the EMAD head.However, take note that the image and description are inaccurate; you will likely receive the newer, "updated" head.Instead of being at 2 o'clock as shown, the mic port is now at 4-5 o'clock. Evans has also removed the replaceable rings and replaced them with an affixed ring. reducing the port's size as well (4" instead of 5").The rings on my head didn't get used because I thought I got more of a thud without them and because I've heard they break anyway. Therefore, it's challenging to get the old head and the revised head at the same pitch, very close but not exactly, at least for me. I'm not quite Bob Gatzen at drum tuning, of course.Therefore, get two if you're looking to match a head on a double bass drum setup. If not, however, and you want a fantastic head with mic accessibility without drilling your own hole, and low end wallop, this is a terrific head.
4.3/5
All Evans drum heads are designed, engineered and manufactured in the USA
A single ply offers an open and expressive sound
10" resonant drum head made using a single ply of 10mil film
Sound Shaping Technology insures optimized performance for each individually sized drum head
$234
To try and control the sustain, we recently finished putting one of these resonant heads on our DW 18" floor tom. This head sounds fantastic and significantly reduces the ringing tone coming from this floor tom cannon.The head was simple to set up and raise to pitch. I could see the tone had changed right away.Holding the head up on your finger, away from a drum, and lightly tapping the middle of the head with your finger is an interesting approach to forecast how the head will perform. It was quite interesting to compare the original DW-Remo to this Evans EC-18 because the former had far more boom and sustain than the latter.Our DW set is not moved around for performances; it merely resides in our recording studio. The floor tom can speak authoritatively without using excessive low frequency sustain thanks to this Evans-EC head.I wish you good music!
4.3/5
16" resonant drum head made using a single ply of 10mil film
All Evans drum heads are designed, engineered and manufactured in the USA
A single ply offers an open and expressive sound
Sound Shaping Technology insures optimized performance for each individually sized drum head
$234
Since I've been playing in bands for almost 15 years, tuning my drums has become a daily challenge for me. Particularly in settings where the Tom Toms aren't microphoned. Your dreams will come true with this Evans EC Reso head! You'll be astounded by the increased projection your drums produce as well as the clarity and authentic tone these babies provide. Change your policy heads—they matter! It was the best investment I've made in a long time. If you're curious, I use Clear Evans EC2 batter heads on top. Order a set of these and hear how much better your drums actually sound! Regards, Evans. Fantastic product!
Drumheads should be changed every few months, or when they start to sound dull.
No, Steve Gadd is not a doctor.
In my opinion, Steve Gadd is an excellent drummer. I love his groove and feel, and he always seems to bring something new and interesting to his playing. He's also a great teacher, and I've learned a lot from watching him play.
If you're a drummer, you've probably wondered if you should put a pillow in your bass drum at one point or another. The answer is, it depends. Some drummers find that a pillow helps muffle the sound of the drum, while others find that it deadens the sound too much. Ultimately, it's up to you to experiment and see what works best for you and your playing style.
John Bonham used a variety of drumheads during his career with Led Zeppelin. His primary choice was the Remo Clear Pinstripe, which he used on the majority of his recordings and live performances. He also occasionally used the Remo Coated Pinstripe and the Evans Hydraulic Black on select songs.
Ringo Starr is a well-known drummer who was a part of the Beatles. He is known for his unique playing style and his use of different drumheads. Ringo used a variety of different drumheads during his career, but he is most well-known for his use of Ludwig drumheads. Ludwig was the first company to produce drumheads specifically for Ringo, and they continue to be one of the most popular choices for drummers today. Ringo also used Remo drumheads on occasion, and he was one of the first drummers to experiment with different head materials.
COPYRIGHT © 2019
