4.9/5
Suitable for vacuum service to 29. 9" Hg
Heavy-Duty Forged Brass Body
600 PSI CWP 150 WSP Service
Full port
UL, CSA, FM approved
$234
I purchased this to replace the hot water heater's plastic garbage drain/flush valve. I don't see how they could have chosen a design so unusable. For the male end of the valve, I had to purchase a hose adapter. Even though I've tightened it down somewhat, I'm still experiencing a very sluggish drip. Maybe not enough plumber's tape was applied. Once the alkali takes hold, it ought to stop. My tank can now be flushed with such ease.
4.7/5
LEAD FREE: Made of high quality forged lead free DZR brass.
QUALITY: Only Shark Bite's quality and performance is field-proven with more than 550 million connections. Shark Bite is the only push-to-connect brand than can ensure a clean, leak-free connection
PERFORMANCE: 200 PSI and 200 degrees F. Use in potable water and hydronic heating applications.
VERSATILE: Shark Bite Ball Valve plumbing fittings fit Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination
INSTALLS IN SECONDS: 1/2 inch ball water valve requires no special tools, no soldering, no crimping or glue. Push to connect design provides an efficient application that saves time and money. Just push to create a watertight seal
$234
I am by no means a plumber and typically don't like to perform plumbing repairs, but this made it quite simple. The ball valve arrived a day early; thank you.I had to replace a screw-in/out stop off valve that was soldered into 3/4" copper tubing for the water heater and was 42 years old because when I attempted to turn off the cold water to the heater to flush it, water started to spray out of the valve! I believed that a ball valve would be a better option because the valve can be fully opened or closed. Because I don't enjoy tinkering around with copper pipe soldering, I went with the Sharkbite 3/4" ball valve. It is intended to function with copper and additional pipe or tubing.The old ball valve was sweated off, and I sanded and cleaned both ends of the copper pipe to remove any leftover solder before installing the new ball valve and turning on the main shutoff. I couldn't believe I could do this without leaking anyplace!Very well done! And for convenient access, I can swivel the handle anywhere I need it.I heartily endorse this ball valve with a push-to-connect design.
4.7/5
RESIDENTIAL and COMMERCIAL: All SharkBite PEX pipe tubing meets the same standards for commercial and residential plumbing applications
COPPER, PEX, CPVC, PE-RT: SharkBite Ball Valve plumbing fittings fit Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination
INSTALLS IN SECONDS: 3/4 inch ball water valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal
PERFORMANCE: 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating Applications.
QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection
$234
I am by no means a plumber and typically don't like to perform plumbing repairs, but this made it quite simple. The ball valve arrived a day early; thank you.I had to replace a screw-in/out stop off valve that was soldered into 3/4" copper tubing for the water heater and was 42 years old because when I attempted to turn off the cold water to the heater to flush it, water started to spray out of the valve! I believed that a ball valve would be a better option because the valve can be fully opened or closed. Because I don't enjoy tinkering around with copper pipe soldering, I went with the Sharkbite 3/4" ball valve. It is intended to function with copper and additional pipe or tubing.The old ball valve was sweated off, and I sanded and cleaned both ends of the copper pipe to remove any leftover solder before installing the new ball valve and turning on the main shutoff. I couldn't believe I could do this without leaking anyplace!Very well done! And for convenient access, I can swivel the handle anywhere I need it.I heartily endorse this ball valve with a push-to-connect design.
4.7/5
Quality: only sharkbite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection
Versatile: SharkBite ball valve plumbing fittings fit copper, pex, cpvc and pe-rt pipe and connects them in any combination
Performance: 200 psi and 200 degrees f. Use in potable water and hydronic heating applications.
Lead free: made of high quality forged lead free dzr brass
Installs in seconds: 1 ball water valve requires no special tools, no soldering, no crimping or glue. Push to connect design provides an efficient application that saves time and money. Just push to create a watertight seal
$234
I am by no means a plumber and typically don't like to perform plumbing repairs, but this made it quite simple. The ball valve arrived a day early; thank you.I had to replace a screw-in/out stop off valve that was soldered into 3/4" copper tubing for the water heater and was 42 years old because when I attempted to turn off the cold water to the heater to flush it, water started to spray out of the valve! I believed that a ball valve would be a better option because the valve can be fully opened or closed. Because I don't enjoy tinkering around with copper pipe soldering, I went with the Sharkbite 3/4" ball valve. It is intended to function with copper and additional pipe or tubing.The old ball valve was sweated off, and I sanded and cleaned both ends of the copper pipe to remove any leftover solder before installing the new ball valve and turning on the main shutoff. I couldn't believe I could do this without leaking anyplace!Very well done! And for convenient access, I can swivel the handle anywhere I need it.I heartily endorse this ball valve with a push-to-connect design.
4.6/5
FIP CONNECTION: ensures a secure, leak free joint and complies to ANSI B1. 20. 1 and ASME B16. 22
SUPERIOR QUALITY: heavy duty DZR lead free forged brass construction
FULL PORT CHROME BALL: allows optimal water flow
CERTIFICATIONS: CSA, UPC and ANSI
EASY CONTROL: with vinyl lever handle and 1/4 turn shutoff design
$234
Your text will be rewritten by QuillBot. Start by typing or pasting something into this box, then hit the enter key.
4.4/5
Heavy duty, commercial grade
Size: 3/8 inch barb to barb
Made of lead free brass
180 degree valve closing range, the handle can close the valve by rotating it to either side of the valve body
$234
You must sometimes make lemonade when life hands you lemons. However, occasionally life will give you a strange tubing project and you will require a lot of ball valves; it goes without saying that I was given the latter. These valves are really reasonably priced; they are unquestionably far more affordable than those you might purchase at your neighbourhood hardware shop. To open the valve, leave the big red lever aligned with the barbs; to close it, turn it in either direction. The barbs are extremely sturdy and feature several parts to provide a tight fit. Overall, I'm really happy and eager to receive more lemons in the future.
4.1/5
$234
If you need to switch off your water to mend a sprinkler pipe, add this without a doubt. When our pipe burst, I had to cut off the entire house because my house didn't have one before. Obviously, the wife wasn't too pleased. With this, I can simply turn it off and the house will still have water if the sprinklers break.
COPYRIGHT © 2019