Best Automotive Sun Protection Window Tinting Kits in 2020



LEXEN 2PLY 20" x 10' Premium Carbon Window Tint Film Roll (5% Limo (Darkest Shade)) Review:


OK, First of all I haven't attempted DIY window tint since the mid 1980's which was a dismal failure. I am a amateur and this is an art. In my opinion this window tint is absolutely fine. Here are a few tips that I learned by hard knocks. 1) BUY A TOOL KIT. there is one on amazon that has a very nice blue squegee and several smaller scraper type squeegees. 2) When you make your homemade cleaner i added a good amount of alcohol and use enough soap! if you dont have enough of either the alcohol or soap, the tint sticks quickly and you'll be doing it over. 3) scrape the window with a razor and squeegee it last MAKE SURE IT IS CLEAN!! 4) take your time and work out all of the little bubbles. 5) BUY MORE TINT THAN YOU THINK YOU'LL NEED. 6) dont get discouraged. The first one i did i was highly dissatisfied with but after drying looked ok. After a few windows you'll have the hang of it and keep your razor sharp! I just finished my entire motorhome and it looks great. Good luck. I will be posting this review on the other roll i bought as well.



9PCS Vehicle Glass Protective Film Car Window Wrapping Tint Vinyl Installing Tool: 4 Inch Felt Squeegee, Retractable 9mm Utility Knife and Snap-off Blades,Film Cutters Review:


Now I've got a small car audio shop in Virginia Beach I usually don't do tinting but know everything about it and I'm around it all the time I bought this kit for my personal use for my own vehicles and this is better stuff than some of the good installers that I've had in here that use this type of tools for window tinting very impressed by all means



Ehdis New Arrival!! 7 PCS Vehicle Glass Protective Film Car Window Wrapping Tint Vinyl Installing Tool: Squeegees, Scrapers, Film Cutters Review:


Every tool in this kit is another weapon to win the battle against a (sometimes) difficult process... TINTING!

It can be a real pain to try and lay down a nice, professional tint job. With these tools, I was given options to pick the right squeegee or pick for each problem I encountered.

Good quality tools, and great value for money.



Rabbitgoo Window Film Complete Installation Kit Vinyl Wrap Application Tool Kit Professional Vinyl Film Wrap Kit Window Tint Film Installing Tool Review:


I saw this as an recommended item for purchase because I was getting the Rabbitgoo window cling and I'm glad I got it, because it made the installation easier. The kit only costed $9 but was worth it unless you already have these items. It came as advertised. The knife is very sharp and cut the cling like butter. The spray bottle worked well with no issues and the squeegee worked well too. Overall great pack of items that can be reused.



Mkbrother Uncut Roll Window Tint Film 5% VLT 30" in x 10' Ft Feet Car Home Office Glasss Review:


I had absolutley no experience.
I watched several Youtube videos and gave it a shot.
It worked.
It is crazy effective in helping cool off my van.
Only advice would be to take your time.
Product arrived as described and in a timely manner.
I will purchase again, if I intended to tint any additional windows.



Gomake Auto Vinyl Wraps Tool Professional 4 Inch Magnet Squeegee with Micro-Fiber Felt Edge/Film Squeegee/Vinyl Squeegee/Plastic Scraper, Pack of 3 Review:


There's a magnet in each end, and it takes both magnets to hold the squeegee to whatever surface you're sticking to. For instance, if I stick the squeegeee to the steel leg of my workbench, it'll dangle and fall or possibly slide down if I just stick it by one magnet. Once you align it to get both on, it sticks fine. Think of it as handy to stick to a car to free up your hand, but not nearly strong enough to hold material to the car without moving. Stiffness wise, they are stiffer than a regular Blue squeegee, which is fine, and the foam felt is good. Overall I like them a lot, and will use them a ton. Just know the magnets are just strong enough to hold the squeegee up.



LEXEN Two Front Window Precut Tint Kit Computer Cut Tinting Glass Film Car Any Shade Review:


Inexpensive way of applying tint yourself than paying 2x or even more from a tinting shop. Reason I bought this is because of the new NY tint inspection added to the yearly inspection. SUVs/trucks: no tint in front windshield and side 1st windows. Sedans: no tint in windshield, and both 1st and 2nd side windows. I believe you can tint rear just as long as you have rear view mirrors. Must have 70% light go through. Anyways I will remove the tint before inspection then order these and apply afterwards. The tint is fairly easy to apply. Just watch a few vids online for tips. Mine would be to take your time and prepping the glass is key. Making sure it's absolutely clean! to prevent bubbles popping up due to dirt etc. I added a pic. I only applied the tint to the front 1st side windows (35%) the rest is factory tint -'17 Toyota Highlander. The tint helps minimizes the heat from the sun and provides a little privacy. At 35% it's really not too dark. Cops haven't pulled me over yet. On my lancer which had 20% tint - $90 ticket. If you live in NY and you like your car tinted, I encourage you to petiton for the mandatory tint inspection be excluded. This hurts the customers as well as the tint shop owners/workers who make a living on tint. Only reason why I'm doing this myself is because every year I have to remove it.



Mkbrother 2PLY 1.5mil Professional Uncut Roll Window Tint Film 20% VLT 30" in x 10' Ft Feet (30 X 120 Inch) Review:


So before I go into the details this was my 3rd attempt at tinting my windows, this time I figured why not try that pre cut tint kit.

Boy am I glad I did.! The kit you guys supply is top notch! The included tools worked great, at first I thought it was a lilttle too big but after getting all the water out it fit very nice, keep in mind my first two attempts At tinting went horrible to say the least, this kit was so good I almost want to say it was easy.! Thanks for a great product guys



KAFEEK 7pcs Car Glass Protective Film Installing Tool Review:


If used as intended with quality tint you won’t have any issues, to tell you the truth I didn’t know what half the stuff in the package was and the instructions are very poorly translated( good for a laugh though) but if you know what tools you need (I bought it for the small squeegee and the plastic pusher things) they work great I think the window scraper tool scratched my window but with these I managed to install my wife’s window tint at expert level quality :)



LEXEN 2PLY 20" x 10' Premium Carbon Window Tint Film Roll (20% Dark Shade) Review:


OK, First of all I haven't attempted DIY window tint since the mid 1980's which was a dismal failure. I am a amateur and this is an art. In my opinion this window tint is absolutely fine. Here are a few tips that I learned by hard knocks. 1) BUY A TOOL KIT. there is one on amazon that has a very nice blue squegee and several smaller scraper type squeegees. 2) When you make your homemade cleaner i added a good amount of alcohol and use enough soap! if you dont have enough of either the alcohol or soap, the tint sticks quickly and you'll be doing it over. 3) scrape the window with a razor and squeegee it last MAKE SURE IT IS CLEAN!! 4) take your time and work out all of the little bubbles. 5) BUY MORE TINT THAN YOU THINK YOU'LL NEED. 6) dont get discouraged. The first one i did i was highly dissatisfied with but after drying looked ok. After a few windows you'll have the hang of it and keep your razor sharp! I just finished my entire motorhome and it looks great. Good luck. I will be posting this review on the other roll i bought as well.