4.6/5
ã€Bright and Sharp Image】High Definition and Bright Projection.Using high brightness LED chip,Very bright lighting output,Very low power consumption.
ã€Worry-free service】30-day unconditional refund and one-year warranty! If you are not satisfied with the car door light or if the light is not compatible with your car model, please do not hesitate to contact us for a full refund or a new replacement as you like.
ã€Warm tips】The package includes only 2 pieces lights. You need to double order If you would like to use for 4 car doors.
ã€Fabulous Performance】The MINI LOGO is illuminated into the open door surface to provide a light to aid entry into and out of the vehicle When the door is opened.
ã€Easy to install】No drilling, no wiring, no disassembling, no damage to your Car. Easy to install,It will only take you about 5 minutes.
$234
This is quite attractive and functional. They were purchased for my daughter's automobile, and she adores them. Similar goods that I've purchased in the past for other cars have always worked well and snapped into position. These failed to. Not the best fit. They did sort of fit into place, although it took a little more strength than I preferred. To make it stay in place, I had to strike it with the back of my fist. has been there for more than a month without any problems, so I'm assuming the fitment will be perfect. But not like other installations I've made.
4.5/5
☻HIGHT QUALITY: This led door logo light using high brightness led chip, very amazing lighting output with high definition and bright clear Infiniti logo projection. Built-in CAN-bus controller, complete no onboard computer error.
☻EXCELLENT SHOWING: This courtesy ghost shadow light has excellent showing. The Infiniti logo projection will always show on the ground when you open the car door, the logo light will be off automatically when you close the door.
☻AS FUNCTION LIGHT: Besides as the lamps, it will make your car look cool, also can as a function lights, this lamp kit also can be used for a signal light to drunker or others.
☻Compatible with Infiniti Series (Infiniti FX 2007-2019; Infiniti G37, G25; 2007-2019 Infiniti Q50 2013-2019; Infiniti Q70 2013-2019; Infiniti Q60 2013-2019; Infiniti M Department 2007-2019 Infiniti EX 2008-2019; Infiniti QX50 2013-2019; Infiniti QX70 2013-2019; Infiniti QX56 2011-2019; Infiniti QX: QX80 2013-2019(Note. Before purchasing, you must first confirm whether the car has original door lights, if not, it is incompatible.)
☻EASY TO INSTALL: Just take out your old light and insert this product without change wires or drill hole, no damage to your Car. It will only take you about 5 minutes.
$234
I then started my lighting installation quest. Others claim it's upside down, while others claim it clips in perfectly. These are some advice I picked up after installing them on my 2019 Nissan. Additionally, if you haven't tried installing yet, the tips will look confusing. Therefore, if you are having difficulties making it function, please come back and read this; when you do, you'll understand what I mean. Don't connect the plug into the incorrect one; there are two sets of tiny holes on it. This may be the result of your prongs being higher than the plugs. The prongs might need to be gently pushed down in order to line up properly. Gently push with a screwdriver with a blade. The light's black spherical housing may be turned upside down. You can remove the black circular shell from the clear plastic holder, keeping in mind how it will go back together, and plug it in to test this before you plug it in because you won't know until you do. If it is upright, carefully slide the black spherical casing in a clockwise or counterclockwise direction. The spherical, black casing has a little notch that you can see. Keep in mind that you must accomplish all of this while keeping in mind that the transparent plastic holder will be in the correct position and not upside down. The black casing should then be placed back into the clear plastic holder where it was. Given that it won't fit in the hole, this might be challenging. Simply turn it till the hole is filled. Instead of attempting to insert the prongs first, insert the circular casing into the hole first. Then, spin the casing to reposition the prongs into the clear plastic holder. Make sure your clear plastic holder is correctly positioned and not upside down before plugging in the light. This will also choose whether to place the automobile plug on the transparent plastic holder's right or left side. It should light up once you click it in because the prongs should now easily slide into the appropriate two holes. If not, you might have to shut and reopen your door. I used my automobile for it. When I opened my door after closing it and realized it was still incorrect, it lit up. Overall, this installation only takes a minute for some people. Others need you to rotate the case 180 degrees or realign the prongs. So it took 30 minutes to figure it out after 30 minutes of trial and error. They have really made me happy. I hope this company spends the time to document troubleshooting advice for their product.
4.3/5
â¤EASY TO INSTALL: Just take out your old light and insert this product without change wires or drill hole. All of our LED bulbs are designed for easy DIY installation & direct replacement.
â¤PACKAGE INCLUDES 4Pcs LEXUS COURTESY GHOST SHADOW LIGHT: For left door and right door. When the Lexus projector image gets faded, you can replace Lexus logo chips with new logo lens.
â¤SHOWING OUTSTANDING: This courtesy ghost shadow light is designed for Lexus car owners. The Lexus logo projection will always show on the ground when you open the car door, the logo light will be off automatically when you close the door.
⤠HIGHT QUALITY: This led door logo light using high brightness led chip, very amazing lighting output with high definition and bright clear Lexus logo projection. Built-in CAN-bus controller, complete no onboard computer error.
â¤Compatible with Lexus Cars: Lexus RX 2007-2016; Lexus ES 2006-2016; Lexus LS 2005 -2016; Lexus LX 2007 -2016; Lexus IS 2006-2016.Please confirm your car models before the purchase.
$234
These were bought for looks, but I also like how they work. These lights can be installed immediately! I removed the old lights with a flathead screwdriver, disassembled the connection, and then wired in the new lights. then lightly pulled them back into position as they clicked in. absolutely resembles the photo in the ad! The purpose of these lights is to make it easier to access the car at night because they are much brighter than the factory lights. My M37x's interior is mostly dark, thus these lights are quite helpful! For anyone who is curious, you can only view them in a dark environment, at night, etc. because they wash out in standard light. I'm thinking about getting a set for my girlfriend too. Very affordable device to enhance your car's appearance at night.
4.2/5
2.Plug and Play: Easy to install, no drilling, no wiring, no damage to your car. installation is simple, directly replace the original car door lights.
3.High Definition and Bright Projection: Using high brightness LED chip, 12V 5W power, very bright lighting output, very low power consumption. 2PCS Courtesy Step Lights in the box, one for left car door and another one for right door.
4.Compatible with Cars: Fit for a lot of Series, FX37 FX50 G37 G25 Q50 Q60 M25 M35 M37 EX25 EX35 EX37 QX50 QX56 QX70 QX80 FX G M EX etc. Detailed compatible car models please refer to the compatible model image or description page.
5.Important Notice: Amazon filter system may not be 100% accurate, the bulb size may vary between trim of your vehicle. Please double check owner’s manual or original bulb size to confirm before placing an order.
1.High quality: We use Cree LED chip which has high light output but low consumption, with HD projector provides a bright and clear logo shadow on the ground.
$234
My 18 Q50s have a plug-and-play installation. The increased projection on the ground gives the car a somewhat higher end touch, and I believe it gives the interior door panel a cleaner and cooler/brighter white than the original bulbs. I'm delighted with my purchase and the pricing. Even if they only last six months, I'll easily buy another set for $12 to replace them. The only thing I would ask for is a more expensive model with laser-etched glass used for projections rather than film to ensure longevity.
4.1/5
2.Plug and Play: Easy to install, no drilling, no wiring, no damage to your car. installation is simple, directly replace the original car door lights.
3.High Definition and Bright Projection: Using high brightness LED chip, 12V 5W power, very bright lighting output, very low power consumption. 2PCS Courtesy Step Lights in the box, one for left car door and another one for right door.
4.Compatible with Cars: Fit for a lot of Series, FX37 FX50 G37 G25 Q50 Q60 M25 M35 M37 EX25 EX35 EX37 QX50 QX56 QX70 QX80 FX G M EX etc. Detailed compatible car models please refer to the compatible model image or description page.
5.Important Notice: Amazon filter system may not be 100% accurate, the bulb size may vary between trim of your vehicle. Please double check owner’s manual or original bulb size to confirm before placing an order.
1.High quality: We use Cree LED chip which has high light output but low consumption, with HD projector provides a bright and clear logo shadow on the ground.
$234
They showed up on time, which was a very intelligent development... Because they are manufactured in China and English is taught to the country's elite (such as engineers, scientists, and lawyers), I found it hilarious that the Chinese engineers and product developers attempted to translate the installation instructions (directly) from within the company. I have studied and can speak very basic Chinese (e.g. Hi, The translations were really absurd (you can read them on the side of the box, for example, "'would welcome...' to execute this installation task"). But despite the installation being somewhat confusing with regard to the magnets, I was able to install these relatively easily. The advertisement portrays this product as a "miraculous new technology," but it is actually based on nothing novel in engineering or the sciences. Instead, these are more of a "miraculously clever new development" — "(they're just two magnets which cancel each other's terminal poles (cathode and anode) when the door is closed and nulls (stopsI got the Denver Broncos version (GO BRONCS!!! MY ALL TIME AND HOMETOWN TEAM)...rolled to the Arizona Cardinals vs. Denver Broncos game like a champ and a boss. The light source is actually the most commendable feature of these lights; they have really strong bulbs and the designers did really great work here (one of my only quibbles is that the housing is made of über-cheap plastic, but hey, for $12 who's complaining? ); they shine on the ground really well and, so far, the microfiche (microfilm) is the product's best feature because they project a very clear and lucid logo on the ground; the colors display beautifully when the light The "sticky" films for the magnets are another drawback; the designers may want to look into alternatives (such as "super glue" or epoxy adhesive), as the magnets' small surface areas don't really allow for good attachment. I had trouble with the sticky tape on the magnets; one side kept coming off and wouldn't stay in place until I exerted excessive pressure for nearly a minute. Overall, though, these are fantastic products that are both entertaining and worthwhile.
3.7/5
ELEGANT CARBON FIBER PATTERN ABS: Wireless door light requires very low energy while offers high definition and bright lighting. UNIVERSAL as long as stick on flat car door near to step bar
NEW GENERATION CAR DOOR WELCOME LIGHT: No Magnet Strip Required. Just Stick and Go. EASY TO INSTALL & FITS ALL CARS: NO drill hole needed. 3 Mins Easy Installation. The logo light turns on automatically when the door is open.
COMPATIBLE TO CHEVY CAMARO CRUZE SPARK TAHOE IMPALA SUBURDAN TRAX MALIBU COLORADO TRAVERSE EQUINOX SILVERADO AND MORE
VIP RED CARPET ENTRANCE OR EXIT: Whether you are uber, lyft, taxi driver or professional driver, imagine the moment when your guest or passenger open the door. The smile is priceless and MORE TIPS for sure,,Wireless door light requires very low energy while offers high definition and bright lighting.
BRIGHTER THAN OTHER: Using CREE LED 3535. Brighter than typical ghost shadow light on the market. Powered by 3*AAA batteries (NOT Included)
$234
Looks great. Instead of being battery-operated, I would prefer them to be hardwired.
3.6/5
When the door is opened, the LOGO is illuminated onto the open door surface to provide a light to aid entry into and out of the vehicle.
EASY INSTALLATION: NO drilling, NO wiring, NO disassemblying, NO damage to your Car. Easy to install and show your special scene at night
Compatibility:Mercedes Benz C Class: W204 2008-2014 (SEDANS ONLY); C200 (2008-2011); C230 (2008); C280 (2008); C260 (2010-2013), C300 (2010-2013); Note: If your car model is not included, please do not purchase the product which is not suitable for your car model
High quality: One Waermeb Estaendigkeit and scratch-resistant, top decoration for your BMW
CREE LED Pure White, Voltage: 12 V with 1800L; Package come with 1 set which includes 2 LEDs (4 doors need 2 sets)
$234
Since I couldn't find anyone to do it or tell me which Benz model these work on correctly, I'll go into depth here. I hope someone can use this;2013 C250 Sport Coupe Mercedes-Benz owned by our son.We received a quotation from a Mercedes dealership of $728 for the 2-door Benz ground light emblem. YIKES! (Parts
COPYRIGHT © 2019