4.5/5
Lamp body construction: The lamp body uses 33pcs bright 2835 chipsets for a 360 degree illumination angle,There is a stable resistor inside the lamp body,Standard high temperature resistant 1056 base which can replaces a variety of traditional halogen or incandescent bulbs including Stock : 1056 BAU15S 7507 12496 5009 PY21W
Lamp body length: 39mm 1.53",Lamp body Diameter:17.5mm 0.69",Lamp ;Same size as the original halogen lamp of the car,So it can be adapted to most car,Before buying, still pay attention to whether the size of the product is suitable for your installation space.
Luminous Flux: 650Lum/bulb - Color Temperature: Amber / Yellow - Operating voltage: 12V-24V DC( Can't exceed 24V, otherwise it is easy to burn,Cannot connect AC voltage) - Output Power:4.2W - Bulb Service life:20000 hours,easy plug-and-play installation
4 Bulbs in the package - Value-for-money package, one purchase can meet multiple uses of different parts,it can use it for car parking lights, side marker lights, turn signal lights ,blinker light
Standard bulbs and brighter but these save power and offer enough light,This is not a Canbus Error Free light bulb. If a dashboard message error occurs or the bulb light flashes quickly, please replace the Canbus Error Free light or install an additional 50W 6ohm load resistor.
$234
At first, I wasn't sure how it would turn out, but WOW! These emit an impressive amount of light; forget about using my map lights; simply point these downward. They have absurdly high intelligence. Just have a look at the comparison image I supplied. If they are too bright, which they undoubtedly will be, as other customers have remarked, flip them inwards to slightly darken them down. Every time I see someone turn open the mirror, I giggle since I left mine at full strength! They frequently curse or quickly try to prevent it by slamming their head through the window next to them while raising their hands. I can without a doubt declare that I would buy these again and that I would heartily suggest them. They are bright enough, though I never expected to like seeing all the way up my nose so much! A side note: They are polarity-specific, so if you test them one way and they don't light, flip them over and they will.
4.4/5
Direct replacement for a proper fit every time
Replace just the failed switch
instead of the entire dome lamp console assembly
No special tools required
Easy to install
This part has undergone a rigorous inspection to ensure high quality
$234
Amazon claims that this won't fit my ex's 2007 Honda Pilot, however it does. These switches are not available at Honda Garage. They advised me to replace the complete module, which would cost roughly $90.Symptoms: Opening the door did not cause the driver's map light to turn on, but using the switch did.My research revealed that Hondas frequently experience this peculiar issue. The switch needed to be changed as a result.Therefore, I had to decide whether to invest $12 to test the theory or $90 for a whole program.The next challenge was locating a switch that was functional in the 2007 Pilot. Even though Amazon claimed they wouldn't function, they looked exactly like the stock switch. I took a gamble, and it was a great decision.Use a small screwdriver or knife to gently pry the lens off so that you can replace the switch. Gently pry the two "hinges" to release it. If you pry them off in the right place, they will readily come off. Unplug the two electrical plugs after removing the four screws (but don't tug on the wires!). The entire assembly will immediately disassemble. The 4 tabs on the module must be popped out of the casing. With minimal effort, it comes out. Now, pry the switch aside with a small-blade screwdriver or knife while ensuring sure you have the right switch. It will appear as though it won't move, but it will then suddenly emerge. You might want to lightly scrape the corrosion off the center contact on the module since it is prone to corrosion. Pins should not be bent. Install everything after fully engaging the switch. DONE!The entire process will take less than 30 minutes. It is a simple job, except from the pressure of working overhead. And affordable.
4.4/5
Comes complete with: 3 wire pig tails, hot in, load-out and ground wires for each switch
This switch simply snaps in and replaces the blanks in your exixting panel!
Great for running off-road lights, rock lights, back-ups, air compressor and much more!
This weather resistant, custom made switch is perfect for running aftermarket accessories; it is not a replacement for your stock
$234
Nice switches that match the stock switches on a Jeep. Keep in mind that these need relays and are only intended to turn relays, not loads. I had assumed that my LED lights would be able to support the modest current consumption, but I installed relays per the instructions. Since they don't have a backlighting option, it is difficult to view them at night. It would be useful to be able to see light switches at night.
4.3/5
Comes complete with: 3 wire pig tails, hot in, load-out and ground wires for each switch
This switch simply snaps in and replaces the blanks in your exixting panel!
Great for running off-road lights, rock lights, back-ups, air compressor and much more!
This weather resistant, custom made switch is perfect for running aftermarket accessories; it is not a replacement for your stock
$234
The switch(es) appear to be of good quality and function quite well. With the wiring harness for Duallys from Rigid Industries, the switch face doesn't appear to be lit up.They function perfectly with my other harnesses (that have relays).The switches will need to be further trimmed if they are to be used with the Jeep JK A-Pillar switch pod because they are broader than required. They will slightly rub against one another on the Pillar pod, but they do work.FYI
4.3/5
Direct SPDT dome lamp switch replacement for Honda Acura overhead light switch refer OEM: 34404-SDA-A21, 34404-SDA-A22D3
No Need to buy the entire dome lamp console assembly if you have an interior light switch problem of CR-V Element Odyssey Accord Pilot Ridgeline
These Map light switches are constructed of high-quality materials for long-lasting durability, easy fix and inexpensive
Map lamp switch fit for: Honda CR-V Element Odyssey Accord Pilot Ridgeline Acura Dodge Ram 1500 Toyota Tundra, Civic, etc
Package included: 2Pcs Interior Light Switch + 2Pcs Bonus Map Dome Light LED Bulbs (White Light)
$234
My husband viewed a few YouTube videos about how to change the switches in our 2005 Honda Accord before starting the process. The switches came two days after we got this package from Amazon, were installed, and have been operating flawlessly for several months now. The replacement bulbs emit a more blue-white light than the original bulbs, which were a more conventional yellow-white. They function perfectly, but the color of the light from the old light in the back of the cabin is different. The only true complaint I have about this product is that one. In fact, my husband is going to order another one and use it over the following several days to fix the switches in his parents' 2005 Honda Accord.
4.3/5
★ Fit models: Compatible with Honda CR-V element odyssey accord pilot ridgeline acura dodge ram 1500 toyota tundra, Civic, etc.
★ Package include: Set of 2 interior light switch and 2 Dome lamp switch kit.
★ Features: Made for high-quality materials for long-lasting durability.
★ Easy to install: directly replace and easy to install.
★ Direct dome lamp switch replacement part for Honda acura overhead light switch 34404-SDA-A21, 924-798, 34404-SDA-A22, 34404-SDA-A22D3.
$234
In my ten-year-old Odyssey, the map lights had one defective switch. I preserved the one working switch that was already there as a backup and replaced both of them with the new switches that came in the package. The lamps that came with the replacement switches are of the LED variety and are significantly whiter than the original tungsten filament lamps, though not significantly brighter. They ought to endure for as long as we retain the automobile. The replacement was simple and took little longer than viewing a YouTube video, however in my van, two of the required screws were actually bolts that needed a small socket to be removed (8mm if I remember correctly)
4.3/5
Fits all Wranglers from 1997 to 2006 model years
Just snaps in stock panel
Easy to install looks stock no cutting
$234
I was able to insert this into the vacant space in my TJ. Removed the dome light fuse, inserted an inline fuse, attached the red wire of this switch to the power side of the fuse slot, and the white wire to the load side of the fuse slot. I didn't connect the black wire because doing so would constantly turn on the switch. The only drawback is that it's a regular switch, so when I want to turn on the dome light, I turn the switch down, and when I want to turn it off (when the doors are closed), I turn the switch up. But that only irritates my OCD; it has no impact on functionality.
4.2/5
[ LIFETIME WARRANTY ] - Order from KanSmart for a true worry-free experience. We provide lifetime warranty and customer support.If the switch ever fail on your Polaris Ranger,,UTV, Can Am Maverick Commander or other models, simply contact us for a replacementï¼›
[ POWERFUL FUNCTION ] - 20 Amp 12 Volt ON-OFF Rocker Switch,standard size mounting hole 1.41" (36mm) x .86" (22mm).Little dots on the surface make the touch better and and etched pattern ensures lasting durability and always visible to youï¼›
[ EASY TO INSTALL ] - Lower LED is independent and can be wired to separate dash light circuit.3 PIN switch,7-battery negative(-), 2-battery positive(+), 3-light bar positive(+).Provides full control to easily power on/off. User-friendly design for you;
[ QUALITY ASSURANCE ] - This is the standard size of most switch holes in modern vehicles,100% test before shipping.Made of strengthened plastic and well-conductive pins, and all patterns are etched directly onto the switch surface to ensure long lasting durabilityï¼›
[ FITS THE FOLLOWING VEHICLE ] - 2014 2015 Commander Max 1000, 2013 Maverick 1000, 2013 2014 2015 Maverick 1000R, 2010 2011 2012 2013 2014 Ranger 800, 2011 2012 2013 2014 Ranger 900, 2010 2011 2012 2013 2014 RZR 4 800, 2014 2015 RZR XP 1000, 2011 2012 2013 RZR XP 900.For multiple switch replacement, such as led light bar, fog lamp, rear light or auxiliary lamps switch, etcï¼›
$234
I looked all over for the greatest LED light bar rocker switch I could discover. After three months of research, watching YouTube reviews, and speaking with dozens of rocker switch users, I've decided on this one. I adore its tough, rugged appearance, and the color perfectly complements the interior of my Polaris. It was obvious to choose because of the image of the light bar on the switch. If you are blind, there are even tiny bumps on it to let you know that this switch is unquestionably for the LED light bar. I'm so thrilled with this purchase that I'm telling everyone I know about it. So stop searching if you're seeking for an LED toggle switch. NOW GO BUY IT.
4/5
ALL ITEMS SHIP FOR THE USA
LIFETIME WARRANTY
INSTRUCTIONS INCLUDED
Fits in stock switch panel looks stock fits all Jeep TJ /LJ Wranglers from 1997 to 2006
EASY INSTALL
$234
nice change Good tactile feel when pressing the switch; well manufactured. Beautiful graphic. It has not been tested for water resistance. They lost 1 star because they cost too much for what they are. Cost would be acceptable if the graphic was laser cut and lit. Even the OEM switch has a laser-cut lighted design. However, good switch
COPYRIGHT © 2019