Best Automotive Replacement Exhaust Clamps in 2022

Last update: December 3, 2022

Exhaust-Mate 35794 3" Heavy Duty U-Bolt Exhaust Clamp Review:


Four were purchased for a project. They are packaged in boxes that split along the side. I put in for four. One of the nuts escaped when one of the clamp boxes broke open since they were all packaged together in a brown shipping bag that wasn't entirely sealed. DON'T JUST TAPE THE BOX'S ENDS, AS THIS DOESN'T FIX THE PROBLEM. TAP THE SIDES AS WELL.The clamps themselves are strong and reliable; they use flanged nuts and a 3/8" diameter u-bolt as is standard.



Walker Exhaust 35325 1 1/2" Hardware-Clamp Review:


The holes are 1-1/2 from the centre of one bolt to the centre of the other bolt, but the 1-1/2 pipe clamp doesn't fit the holes, so I'm keeping them anyhow in case I need them for the car or anything. Next week, I'll learn what size I need.



TOTALFLOW 2" TF-JB56 304 Stainless Steel Butt Joint Exhaust Muffler Clamp Band-2 Inch Review:


Excellent new spin on a classic product. I was happy to discover an alternative to the traditional ubolt muffler clamp. The concept and idea are good, however the execution is subpar. The problem arises when trying to hold it together upside down and in place under a car or truck and try to operate a wrench to tighten it while spacers move and fall out. It appears to be simple enough; a few bolts loosen and lets it out to adjust; the only issue is that to get it big enough to go over exhaust it must be fully taken apart, no big deal while sitting at a work bench. With that said, it's a terrific product with one installed beautiful hold made of quality materials if you can somehow manage to have three hands to install it.



TOTALFLOW 3" TF-JB60 304 Stainless Steel Butt Joint Exhaust Muffler Clamp Band-3 Inch Review:


Excellent new spin on a classic product. I was happy to discover an alternative to the traditional ubolt muffler clamp. The concept and idea are good, however the execution is subpar. The problem arises when trying to hold it together upside down and in place under a car or truck and try to operate a wrench to tighten it while spacers move and fall out. It appears to be simple enough; a few bolts loosen and lets it out to adjust; the only issue is that to get it big enough to go over exhaust it must be fully taken apart, no big deal while sitting at a work bench. With that said, it's a terrific product with one installed beautiful hold made of quality materials if you can somehow manage to have three hands to install it.



SPEEDWOW 2.25" Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2 Pieces Review:


As a novice technician without access to welding equipment, I would choose to patch up the rust-through holes in my exhaust system so that it would last for a few more years. The solution consists of a band clamp, a piece of pipe, or an adaptor. Every muffler shop I visit tells me they won't conduct patch jobs or offer me a weld; they always want to rebuild the entire system. These days, both junkyards and trade schools are extinct. Not like when I was younger, when I could easily find parts in a variety of junkyards and where many individuals learnt to weld in a shop.



TOTALFLOW Natural Finish 1.5" TF-U150 304 Stainless Steel Saddle U-Bolt Exhaust Muffler Clamp-1.5 Inch Review:


For my truck, I purchased a new exhaust tip. The supplied clamp was ineffective because it had a restriction on how tight it could be, keeping the exhaust tip loose unless I applied a shim. I was unwilling to do it. This clamp was what I ordered, and it was excellent. It has a sturdy construction with 5/8 nuts you can tighten quite tight. This clamp prevents the exhaust tip from being as tight as a bug on the tailpipe!



EVIL ENERGY 2.5 Inch 2 1/2 Butt Joint Exhaust Band Clamp Sleeve Stainless Steel Review:


The exhaust Y pipe is a significant blockage, and my van's transmission needs to be rebuilt. It is a 6.0 Gas 2005 GMC 3500 Savana.Yes, the full Y pipe may be dropped, but any technician will tell you that it is difficult. So I eliminated the driver side half of the Y and sliced it in a straight segment close to the passenger side. I needed a reliable connection, so when a friend recommended this sleeve, I quickly ordered it from Amazon and installed it without any issues. It totally seals; there are no leaks or noises, and I receive no incorrect O2 sensor feedback.



EVIL ENERGY 2.25 Inch 2 1/4 Butt Joint Exhaust Band Clamp Sleeve Stainless Steel Review:


The exhaust Y pipe is a significant blockage, and my van's transmission needs to be rebuilt. It is a 6.0 Gas 2005 GMC 3500 Savana.Yes, the full Y pipe may be dropped, but any technician will tell you that it is difficult. So I eliminated the driver side half of the Y and sliced it in a straight segment close to the passenger side. I needed a reliable connection, so when a friend recommended this sleeve, I quickly ordered it from Amazon and installed it without any issues. It totally seals; there are no leaks or noises, and I receive no incorrect O2 sensor feedback.



EVIL ENERGY 2.0 Inch Butt Joint Exhaust Band Clamp Sleeve Stainless Steel Review:


The exhaust Y pipe is a significant blockage, and my van's transmission needs to be rebuilt. It is a 6.0 Gas 2005 GMC 3500 Savana.Yes, the full Y pipe may be dropped, but any technician will tell you that it is difficult. So I eliminated the driver side half of the Y and sliced it in a straight segment close to the passenger side. I needed a reliable connection, so when a friend recommended this sleeve, I quickly ordered it from Amazon and installed it without any issues. It totally seals; there are no leaks or noises, and I receive no incorrect O2 sensor feedback.



2 1/2" Heavy Duty Saddle Style U-Bolt Muffler Clamps with Anti-Rust Coat and Multiple Uses (2 1/2") Review:


I bought these to prevent having to slot my exhaust collectors so that the band clamp style clamps would grab them. I wasn't sure if they would work because my slip fit wasn't particularly snug. They are a lot more durable than the clamps I've previously bought from the parts store, and I was able to spin down on them fairly forcefully without stripping, allowing them to seal nicely. The U channel fits the exhaust tubing exactly; there is no excess slop or play. For the price, it is unbeatable.