Best Automotive Replacement Emission Canister Purge Valves in 2022

Last update: December 1, 2022

Can a purge valve cause misfire?

A purge valve can cause a misfire if it is not functioning properly. The purge valve is responsible for purging the fuel vapors from the fuel system. If the purge valve is not working properly, it can cause the fuel vapors to build up in the fuel system and cause a misfire.

Can I drive with a faulty purge valve?

A purge valve is a part of the vehicle's evaporative emission control system (EVAP). The EVAP system prevents fuel vapors from escaping into the atmosphere. The purge valve is responsible for letting fresh air into the EVAP system so that the vapors can be burned off. If the purge valve is faulty, it may cause the EVAP system to not work properly. This can cause the vehicle to fail an emissions test. Additionally, a faulty purge valve can cause the check engine light to come on.

Can you bypass EVAP purge valve?

Yes, the EVAP purge valve can be bypassed, but it is not recommended. The EVAP purge valve is designed to allow the engine to breathe and prevent fuel vapors from entering the atmosphere. Bypassing the EVAP purge valve can cause fuel vapors to be released into the atmosphere, which is bad for the environment.

Can you replace your own purge valve?

If you have a problem with your purge valve, you may be able to replace it yourself. First, check your owner's manual to see if it is something that you can do. If it is, then you will need to get a new purge valve from your local auto parts store. Once you have the new valve, follow the instructions in your owner's manual to replace the old one.


ACDelco 12690512 GM Original Equipment Vapor Canister Purge Valve Review:


My 2012 Impala Police loved it. I tested the old solenoid since I had an EVAP high purge flow code, and it proved out to be broken.Since I installed the new one, I have not encountered any problems. Because I adore Bosch, it was marked as an authentic Bosch even though it was packaged in an AC Delco sealed bag.P0496 and P0443 were the OBDII codes that were associated with this.



ACDelco 214-2317 GM Original Equipment Vapor Canister Purge Valve Review:


Every time I go to put fuel in my 2014 Chevy Sonic, it is difficult to start and requires several tries before it will turn over. I located the emissions code, conducted some investigation, and came across a video called "Mechanic Link" on TikTok that might be the cause. He claimed that if you can blow air through it, it's bad, and I confirmed that I couldn't with this new part before testing and finding that I could after removing the old part. It started the first time without difficulty after I filled the tank at the petrol station up top. Since there were none, I searched YouTube for guidance. Just be aware that there is a tiny lip that slips up and that there is another that pulls up as well on the back. A safety clip is used in the first clip to keep the other from releasing.



Dorman 911-202 Purge Valve Review:


Most likely, if you're looking at this component, you're having trouble filling your gas tank and have determined that this component needs to be changed. You could be correct or you could be wrong, though. In my instance, the Leak Detection Pump (LDP), which is located under the car, needed to be replaced rather than this component. Just so you know, getting to the LDP without a car lift is practically difficult. Furthermore, even with that, removal is difficult. So, in my opinion, replacing the LDP is not precisely a task for a beginner. Nevertheless, it only took me about 10 minutes to install this and it was a great fit for my 2006 Dodge Grand Caravan. Just an FYI for those who have the same car: the item is directly underneath the radiator cap.



DORMAN 911-222 Vapor Canister Purge Valve Review:


The cost of this product is less than half of what you would pay at any of the major brick and mortar auto retailers. The item performs as intended and will resolve the issue you are having with your canister purge valve. Do not take your vehicle to be fixed if the check engine light comes on and your readout indicates that this is the problem. Just spend $25 on this and do yourself a favor. One of the simplest repairs I've ever made was replacing this component. Basically, it is plug and play. One hose, two electrical plugs, two screws, and two plug-ins. Finding a location where you can use their tool to erase the check engine light codes will now be your only challenge. Good fortune.



12690512 EVAP Vapor Canister Purge Valve, Fit for Buick Cadillac Chevy GMC Saturn 3.0L 3.6L V6 Models Replace # 12610560 55593172 911-082 Review:


The valve itself is excellent value compared to what I would have to spend locally and functions perfectly. The only steps required are to remove the engine cover (remove the oil cap and pull up on the cover), disconnect the wire and hose from the old valve, remove the mounting bolt (10mm socket), and then pull the valve from the manifold. The installation is simple and takes only a few minutes if you take your time (my 2012 Acadia).Install in reverse.As previous reviews have noted, the mounting bolt is the basis for my rating of 4. If you try to push it in, you'll ruin the threads in the far more expensive manifold because the threadform doesn't match the old bolt or manifold.Reuse the old bolt instead of discarding it because it is only holding a 2oz valve in place and is not supporting any loads or performing any essential functions. Discard the new bolt that came with the valve, and in just five minutes you will have saved a ton of money and resolved the P0496 code that most likely led you to this part in the first place.



Standard Motor Products CVS34 Canister Purge Valve Review:


On my 2007 GMC Sierra (not a classic; I can't comment for those, but I suppose comparable), it worked fantastic. I looked over the TSB for this fix and saw that they recommended using two pieces of 5/8" heater hose and four hose clamps. Just in case, I had those on hand. I didn't make use of the supplied filter. Make a short cut from the hoses' mouth to just past the first "rib" in order to remove the impossible-to-remove hoses from the two ports. Then it will be simple to take both hoses off. Slide the canister off after unplugging the electrical. Set up the fresh canister. Apply hose clamps on both sides. Before your remote start will function and the CEL shuts off, you'll need to run it through a drive cycle if you don't have an OBD tool to clear the code. This relates to the vent valve solenoid fault code P0449. I went to a nearby parts store, and they demanded $106 for the identical item number from the same manufacturer. high caliber. Check that fuel cap first, as with any EVAP code if your OBD isn't specific.


How do I know if my EVAP canister is clogged?

If your EVAP canister is clogged, you may notice one or more of the following symptoms: 1. Your "Check Engine" light is illuminated. 2. Your vehicle is difficult to start, or takes longer than normal to start. 3. Your vehicle's fuel economy is reduced. 4. Your vehicle's engine may run rough.

How do I know if my purge valve is stuck closed?

If you have a purge valve that is stuck closed, you may experience a number of symptoms. Your car may run Rough, the check engine light may come on, or you may have a hard time starting your car. If you suspect that your purge valve is stuck closed, you should take your car to a mechanic to have it checked out.

How do you clean a purge solenoid?

How do you tell if your purge valve is messed up?

If your purge valve is not working correctly, you may notice that your engine is running rough or that it is hard to start. You may also see a decrease in fuel economy.

How long can you drive with EVAP leak?

An EVAP leak can cause your car to run poorly, and it may eventually cause engine damage. The best thing to do is to have the leak repaired as soon as possible. Depending on the severity of the leak, you may be able to drive for a while before the problem becomes serious. However, it's always best to get the leak fixed as soon as possible to avoid further damage.

How long do purge valves last?

Purge valves are an important part of many car engines, and they are designed to last for the lifetime of the engine. However, they can sometimes fail prematurely, and it is important to know how to spot the signs of a failing purge valve. If your purge valve is failing, you may notice your engine running richer than usual, or you may see a decrease in fuel economy. You may also notice that your engine is harder to start, or that it stalls more easily. If you notice any of these symptoms, it is important to have your purge valve checked by a mechanic as soon