5/5
✅ PERFECT FITMENT - This kit is in-house designed and produced specifically for all 2015, 2016, 2017, 2018 & 2019 Dodge Charger models (SXT, GT, R/T, Scat Pack, SRT, Hellcat, Daytona, etc.)
✅ COMPLETE CONSOLE KIT - Our inserts are little floor mats for your cup holder, center console and shifter bin
✅ UNIQUE DESIGN - Make your interior stand out with our cupholder and storage bin trim inserts
✅ EASY TO CLEAN - When dirty: remove the anti slip insert liner mats, wash them, dry them and job done!
✅ HIGH QUALITY - Being made from the highest quality rubber available, our honeycomb console liner mats are durable, made to last, protect your car from scratches and are less flimsy than competitor’s
$234
Okk so. The only problem was that, other from the cup holders, nothing suited my 2018 Challenger. However, the craftsmanship is excellent and it looks great. I emailed them to inquire if they had anything for the newer model, but they didn't, so they gave me a refund instead. Customer service and product are both five stars. It does not fit a 2018 challenger, therefore they simply need to change the size.
4.6/5
✅ PERFECT FITMENT - This kit is in-house designed and produced specifically for all 2015, 2016, 2017, 2018 & 2019 Dodge Charger models (SXT, GT, R/T, Scat Pack, SRT, Hellcat, Daytona, etc.)
✅ COMPLETE CONSOLE KIT - Our inserts are little floor mats for your cup holder, center console and shifter bin
✅ UNIQUE DESIGN - Make your interior stand out with our cupholder and storage bin trim inserts
✅ EASY TO CLEAN - When dirty: remove the anti slip insert liner mats, wash them, dry them and job done!
✅ HIGH QUALITY - Being made from the highest quality rubber available, our honeycomb console liner mats are durable, made to last, protect your car from scratches and are less flimsy than competitor’s
$234
Based on recommendations I read elsewhere, I purchased this. I'm sick of having my water bottle slip over the front seat while I'm driving, so I bought a CamelBak 40 ounce steel Chute with a black coating. I find that I don't drink as much if I put the bottle in a neoprene sleeve that I fasten to the seat, even though I really want to use the cupholder because that's what it's designed for! I therefore bought this one. Nice overall unit. I don't believe I'll have the option for other size cups (but I don't require for other size) because the top is a silicone ring and the ears immediately folded on my first day. My 2016 Chevrolet Equinox's factory cupholder is a little smaller than my 2012 Toyota Camry's, but both are what I would consider conventional sizes for automobile cupholders. The cupholder does stick up quite a little (as seen in the photos next to my coffee cup), but it is necessary for the bottle I am aiming for. The expanding bottom that adapts to different size cupholders is a benefit that keeps my drink safe, and I think it's worth the extra money over some others I saw because the base appears to be a thicker plastic than others seem to have (although I never experienced them in person) (where I read others saying some competitors feel out of cupholder with the heavy water bottles).why four stars The top silicone ring, in my opinion, is poorly made. Although the glue used to attach it to the cupholder looks shoddy and the ears are folded in, it seems like an excellent grade of silicone. I still think a friend should try this.
4.5/5
Keeps itmes secure ,Can Store Many Items Such as Smartphone, Cup,Wallet, Cigarettes, Keys, Hand Cream, Coins, Gloves, etc.
Made of durable plastic and high quality leather,Keep Your Car More Clean and Organized .
Adds Extra Storage – 2 Cup Holders & A Side Pocket. It can be used between front seats or front seat & center console.
Easy to use and closer to my body, seat wedge cup holder keeps your drinks and phone at your fingertips.
Fit for most cars which without proper cup holders even Famous cars . We recommend buying a pair. So it can be convenient for you, or to facilitate family and friends.
$234
In my 2017 Audi R8, this looks fantastic and actually matches the seats, something I never even expected to happen. When snugly seated in the passenger seat, it is VERY sturdy. Definitely a worthwhile investment. The R8's cup holder placement is the worst. However, that is the only issue I have with the vehicle. This immediately corrected that. I only wish I had purchased it when I purchased the car eight months prior.
4.2/5
Keeps itmes secure ,Can Store Many Items Such as Smartphone, Cup,Wallet, Cigarettes, Keys, Hand Cream, Coins, Gloves, etc.
Made of durable plastic and high quality leather,Keep Your Car More Clean and Organized .
Adds Extra Storage – 2 Cup Holders & A Side Pocket. It can be used between front seats or front seat & center console.
Easy to use and closer to my body, seat wedge cup holder keeps your drinks and phone at your fingertips.
Fit for most cars which without proper cup holders even Famous cars . We recommend buying a pair. So it can be convenient for you, or to facilitate family and friends.
$234
Our 2013 Honda Accord fits perfectly in the cupholder (we use all rings, and add the included rubber strip from the seller). We are able to insert our 40 oz. The HydroFlask fits effortlessly into the cupholder and has a HydroSkin cover. The only restriction is that occasionally, the Bottle Pro may stick to the silicone HydroSkin we put to protect the flask and completely lift out of the cupholder. If the 40 oz. does not have a silicone skin, it does not occur. We simply placed it back in the cupholder because it wasn't a huge issue. We want to stop this, but we haven't yet used a thicker piece of rubber wrapped around the Bottle Pro.If you take that left turn too quickly and have a full 40 oz. This is not in any way a criticism of the company; it's just our experience. flask in your cupholder, you might accidentally toss the entire thing onto the passenger seat. Therefore, as you rush around the corner, either take that sudden left at a legal speed, or rest your right elbow on your flask. Just passing along. Ahem.Perfect for our requirements and takes care of our needs. The plastic is sturdy and the adjustable rings are included, which is fantastic because other manufacturers might make them extra or supplementary items. We would shop for gifts for other people. In case we needed to return it, the seller included a letter advising us to keep all parts and contact them so they could send us a postage-paid label at no extra cost. Sweet! But we won't let this get back to anyone, we promise. However, it's good to know that the seller stands by their offering. fully endorse. Later, I'll add images and measurements.
4.1/5
Keeps itmes secure ,Can Store Many Items Such as Smartphone, Cup,Wallet, Cigarettes, Keys, Hand Cream, Coins, Gloves, etc.
Made of durable plastic and high quality leather,Keep Your Car More Clean and Organized .
Adds Extra Storage – 2 Cup Holders & A Side Pocket. It can be used between front seats or front seat & center console.
Easy to use and closer to my body, seat wedge cup holder keeps your drinks and phone at your fingertips.
Fit for most cars which without proper cup holders even Famous cars . We recommend buying a pair. So it can be convenient for you, or to facilitate family and friends.
$234
Because I frequently drink from Nalgene bottles and normal cupholders were insufficient, I got two of these for my pickup. I chose this product since it appeared to be sturdy and had a nice appearance. One of them broke after being in use for a few weeks. You can see from the pictures I've given that the bottom fully sheared off at the point of impact. Simply from everyday use, as I pulled out my Nalgene bottle one day, the top fell onto the floorboard.Because my previous review is still going strong, I only gave it three stars. Should anything change, I'll update. I'm crossing my fingers that I merely got a bad one by accident.ADVANCE 07/19/19Seller got in touch after reading my review. To replace my originals, they sent me two new ones. Since then, they say, the material has been improved to stop failure at the contact locations where mine initially failed. I'm upgrading my rating to five stars based on the customer service and the fact that the replacements are currently defect-free. I'll update the review once more if anything changes.
4.1/5
ã€Size Details】 Two cups base suit to put four size of the bottom of the cup: 86mm / 73mm / 68mm. [IMPORTANT] For more comprehensive and more intuitive dimensions, please click on the image (6th image ).
ã€Applicable Seat Type】The car cup holder is suitable for which the seat is lower than center console/ the seat is same level as center console. Conversely, it is not suitable for the seat higher than center console. It suitable for the gap between 2-5cm.
ã€Tips】 This type of product will occupy some room of the seat because it is used on the edge of the seat, but only a little bit, if you mind, please buy carefully. If you have any questions, please feel free to contact us.
ã€Product Design】Cup holder design reasonably use the edge of the seat aperture, concise and beautiful. The car seat cup holder fit most car to provise more storage space, great for organizing items, such as cups, cell phone, pens and etc, meet the different needs.
ã€Easy to Install】Simply slide the organizer between your seat and console for quick and simple installation.
$234
As seen by one of the other vendors, I actually purchased this to install in the door of my Beetle, but it truly did not fit at all. But it was a perfect fit in the Tguan's door. It also fits well between the seats of both cars, but only if one of those pull-up handbreaks is located close to the driver's side on the passenger side. Anyhow, if you and your passenger usually leave your water bottles in the built-in cup holders in your car and want to stop for a Starbucks or a drink or something, this gadget is wonderful.
4.1/5
Genuine BMW Product
Insulated tumbler features press-on lid with sliding open/close mechanism for easy drinking.
Fits most BMW models.
14 oz.
$234
This reminds me of how old-school BMWs were. strong, ageless, and elegant lines. Unfortunately, new automobiles are costly, junk after 100,000 miles, and most of them are leased rather than purchased for a reason. These mugs represent all that BMW ought to strive to be once more.
4/5
Easily adjust to hold almost any size bottle, can or mug
Mounts with tapes or screws
Folds up for compact storage
Comes in black color
$234
Since I had no idea what to anticipate, I genuinely believed that this would be a problematic product. Not great, but adequate enough to get the job done. I'll explain why I was pleasantly surprised in a moment.For mounting, the holder includes screws and double-sided adhesive strips. Because I'm installing a fragile holder to a flimsy section of my treadmill, I utilized everything. For added reinforcement, I inserted two screws through the adhesive. The screws' thickness and length allow them to securely fasten the holder to whatever surface you choose. In my situation, the material was thin plastic, yet the screws quickly seized.The holder can also be adjusted. It adjusts to hold thin water bottles and holds large, thick mugs. Additionally, it is sturdy enough to support those big cups of liquid without any concerns that they would break or tumble.I gave this holder five stars because I would definitely order it again if I ever needed another one.
4/5
Incorporates a one inch cut out to also hold mugs and other cups with an external handle.
Designed to hold the 32/40 oz Hydro Flask, 40 oz 50/50 Flask and other larger bottle up to 3.8 inches in diameter for most car cup holders.
3 INCH UPPER CUP WILL HOLD YOUR FLASK WHILE DRIVING AND MAKING TURNS... OTHER CUP HOLDERS ARE ONLY 2" and your bottle will fall out on turns!
Made from high strength ABS plastic with a glossy charcoal finish.
Tapered base that goes from 3.2" to 2.6" to provide a snugger fit most car cup holders.
$234
Because I was in Hawaii, I decided to get in touch with the dealer directly rather than purchasing this through Amazon. I tried it today and was pleased with how it held my 40 oz. Hydroflask. A different (slightly more expensive) brand that I had previously purchased didn't quite hold onto my flask. The bottle would fly into the passenger side of my Mazda5 as I made the turns—this is not a drifting-style car—like an errant enemy projectile. I must admit that I had my doubts about how well it would function. In particular, inside my Mazda 5.This SmartKup's additional couple of inches in height aid in controlling it. Although the container is just too tall, it fits perfectly into the second cup holder, but the arms of the chairs can make it difficult. You must have the seat arms raised in order to get around this. There will be a slight tilt to the bottle if you want the arms down, but nothing that will affect how the bottle works. If it fits, you could try putting it in the first cup holder. It does sway a little. But there was nothing that I found distracting.I am pleased with how well it works. As an aside, if you have a Jugalug sleeve for your 40oz, you can squeeze it in halfway, but it's preferable to remove it.Overall, I'm satisfied with this purchase!UPDATE: I simply wanted to add a few images to demonstrate how the Smart Kup differs from the one I previously owned.To make the base where the bottom of the Hydroflask is sitting equal to each other for a fair comparison, I wrote the word "other" on some yellow post-it notes. Please take note that the "other" has extra rings and a foam cover to fit more cup holders (missing from picture). My car wasn't able to use it. In actuality, these rings were frail and difficult to lock together after they had been separated. The fact that the Smart Kup does fit my car better is great for me. Additionally, I detested fiddling with all the parts. Smart Kup is a single unit. Put it in and finish. Either way, it works. Finally, the height difference between the Smart Kup and the "other" is the most obvious difference in the comparative photographs. The additional 2 inches significantly improved the stability of the Hydroflask and decreased its propensity to topple over, be knocked out, or launch itself into the air.I hope this makes it easier for others to compare holders and discover the ones that work best for their lifestyle and car.
3.3/5
Incorporates a one inch cut out to also hold mugs and other cups with an external handle.
Designed to hold the 32/40 oz Hydro Flask, 40 oz 50/50 Flask and other larger bottle up to 3.8 inches in diameter for most car cup holders.
3 INCH UPPER CUP WILL HOLD YOUR FLASK WHILE DRIVING AND MAKING TURNS... OTHER CUP HOLDERS ARE ONLY 2" and your bottle will fall out on turns!
Made from high strength ABS plastic with a glossy charcoal finish.
Tapered base that goes from 3.2" to 2.6" to provide a snugger fit most car cup holders.
$234
These are in my 2016 Nissan Rogue, and they function reasonably well. To make them stay, you must firmly put them into the cup holders. When I really pushed, I discovered it would fit even though at first I believed it didn't. The only issue I have is that my Contigo AUTOSEAL 32 ounce cup sometimes pulls out of the cup holder due to how tightly it fits. It only takes a solid push to get it going again.
COPYRIGHT © 2019
