Best Automotive Combo Parking & Side Marker Light Assemblies in 2022

Last update: December 28, 2022

YaeCCC 4pcs LED Rock Lights Under Body Glow Trail Rig Lamp Waterproof (Red) Compatible for JEEP ATV SUV Truck Boat Review:


For usage when swimming or night fishing, I bought 12 of these (8 green and 4 white), which I mounted on the rear of my boat's swim platform. The LEDs appear to be of high quality, and the lights themselves are made of cast aluminum. Since the rubber mounts they ship with are subpar, I decided not to use them and instead mounted them flush with a dab of 3M 4200 sealant in between to stop water from seeping into the boat where the wire passes through the hull. Heat from the lights shouldn't be an issue because these will be used below the waterline. The rubber mounts appear to have been made to enable airflow under the light for heat dissipation, so if you were installing them above the waterline, you could want to use them. Despite having a Lumin rating, the lights are not as bright as one may anticipate. Based on the claimed Lumin output, I had only intended to use four of the green and four of the white, but after mounting them, I found that they were not bright enough, so I went with eight of the green and four of the white. About two times as dazzling as the green ones are the white ones. I switched them to separate toggles so I could use the white ones for nighttime swimming and the green ones for nighttime fishing (green light seems to attract fish better). The cool thing is that if I put on the white and green ones simultaneously, it produces a black-light effect that illuminates the monofilament fishing line and gives the bait the appearance of glowing, which not only looks cool but also seems to frighten the fish! Because I can run all 12 of these lights simultaneously for hours without seeing much of a difference in the voltage on my deep cycle battery, they don't seem to consume a lot of power. They should continue to be impermeable and endure for more than one season, but for the price, they are a great deal! The only significant issues I have with them are that the wire leads could be roughly twice as long and that the hardware they came with appears to be chrome coated rather than stainless steel, making them useless for marine purposes. Overall seems to be a high-quality item at a fantastic price!



Partsam 4pcs 4Inch Led Utility Strip Light Bar White 6 LED Clear Lens Waterproof 12V Vehicles Decoration Surface Mount 4" Thin Line Led Boat Trailer Lights Marine Led Marker Lights Lamps Review:


Good small lights, I installed them in my camper's closet. nice, bright white light (certainly bright enough to light up the inside of a cabinet). Although the power connection wire is quite light gauge, they appear to be well-made (makes the mechanical aspects of making the electrical connection a bit harder).



AUDEW 40 Led White Interior Lights Kit,12V LED Ceiling Lights Kit For LWB Van Trailer Lorries Sprinter Ducato Transit Boats VW Review:


My truck has a cap on it. The cap features doors on the back and sides that open up. There have always been lighting issues when it gets dark or dusk. I had two obscene lights, which were helpful but didn't fill the room. Approximately a 2 inch square, firm plastic base with a little hole in the center (for passing a screw through it), adhesive back, and 40 LEDs arranged in clusters of four lights make up this package (that seems more than sufficient to hold the cluster of 4 lights in place if applied properly). With around 4 inches of wire separating each cluster, the clusters are joined together to form one long set. To solder them together [where the lengths would end up at points where I could safely screw them onto the roof structure], I had to cut the string of lights into separate pieces. I installed the lights on a remote control and ultimately used only 4 clusters. The four clusters do a good job of evenly lighting the entire bed. It worked so well that I made the decision to remove one cluster and put it over our driveway on our lean-to, where there was previously no lighting in the dark. This single cluster, placed nine feet high, illuminates the ground sufficiently to allow safe navigation during the night. See image (taken at dawn with ambient light). I'm thinking about utilizing these in interior areas presently.



Eagle Eyes MZ203-B000L Mazda Driver Side Park/Signal Lamp Review:


I had no problems with the goods. It arrived as promised, seems to be of good quality, and was a perfect fit. worked perfectly.



MICTUNING 40 Leds Van Interior Light Kits 12V White LED Ceiling Lights Kit for Van RV Boats Caravans Trailers Lorries Sprinter Ducato Transit VW LWB Review:


I bought these for my enclosed 14-foot trailer. I decided to keep them in three-person groups, and I spaced them along the center of the trailer at intervals of about 4 feet. In the hopes that it will withstand the vibration of being bounced down the road, I took the effort to solder the connections. For simple on/off control, I connected them to an RV-style rocker switch, and I powered them with a spare 12 volt battery from my son's old quad. Lighting is pretty awesome. Bright, lovely blue-white color. more than plenty to illuminate the trailer. The tiny distance of wire between each of the lights initially worried me, but it was more than enough to splice together. The connections I had to make were minimized by keeping them in groups of three:-) I'm quite happy with the purchase and would suggest it.



Partsam 2 Pcs Clear Lens Amber Dual-Face LED Rear Turn Signal and Parking Lights 42LED Post Mount, Round Double Face LED Pedestal Lights w Chrome for Semi Trailer Trucks Review:


The red/amber lens ones were out of stock, so I ordered these. Although I prefer the way these look over the other ones, the quality is the same. I oversee a fleet of dump trucks, primarily Kenworth T800 and Peterbilt 378, and they frequently get their lights damaged. When I switched to this brand from the Grote equivalent, which cost $45 per, I would say that the quality is on par. Shiny and nice and brilliant. simple to install I now frequently buy PartsAm lights of all kinds, and I believe they are generally nicely manufactured. Additionally, you can buy them in pairs, which is advantageous.



Anzo USA 511021 Acura Integra Chrome Euro w/Amber Reflector Bumper Light Assembly - (Sold in Pairs) Review:


These fit wonderfully in the 01 Acura Integra GSR I recently purchased for pleasure. I give them an A because they appear clean and don't appear to be letting any water in.



Xprite Smoke Lens Yellow LED Front Replacement Turn Signal Light & Fender Side Marker Light Assembly for 2014-2018 Jeep Wrangler JK JKU Review:


This review is for the dual-packaged Xprite front turn signal and side marker lights. There was nothing incorrect with the production or packaging of the two sets of lights that were packaged together. The lack of instructions is the only disadvantage. Despite the fact that they are only lights, I did wind up looking for a YouTube video on installation guidance for both sets of lights. To replace the side markers, you must first remove the first two plastic pins linking the inner fender to the outer fender in order to provide room for the new side marker to be inserted. To remove the old LED, the old light must be removed, and the back harness must be taken off in order to install the new LED. Simply said, there isn't much clearance. When you've finished, you'll need to locate fresh plastic clips to join the inner and outer fenders. I just put in the lights today, and tomorrow I'll head to the auto parts store to get the clips I need.The installation of the turn signals is substantially simpler. I separated the wiring harness and lamp from the old light assembly and then determined which clips had to be held together in order to remove it. After that, the electrical harness plugs back in and the new LED assembly snaps into place from the front of the grill. Very easy, however I didn't bother getting a torch and finished it in dim circumstances. You only need a flashlight; no other tools are necessary because it is so straightforward. If there's a clip holding the light assembly in place stubbornly, you might need a screwdriver.Both lights are functional and flash appropriately. The LEDs in each pair weren't positioned evenly, according to other evaluations I had read. With this kit, this is not the case; all of the diodes seem to be symmetrical. Also no flashing problems. I tested them with the parking lights on and off, blinkers on and off, danger lights on and blinkers off. They look fantastic and have no problems. I wouldn't say they are significantly brighter than standard, but they look interesting and you can tell they are LED because each diode is lit up. So far, so good. I'll report back after a few months to see how they hold up on the road.