4.7/5
CONVENIENT: Can easily be folded down compact for storage and transport when not in use
SPECS: Fits most scoped or unscoped long guns that are 40"-54" in length
EASE OF USE: Slides over the stop of the gun, allowing for use of the sling and can removed quickly for last minute or quick shots
DURABLE: Constructed of water resistant, ballistic material that can withstand heavy use all while still protecting the firearm
DIMENSIONS: 55" L and weighs approx 11.25 oz
$234
One of the best shooting/hunting-related purchases I've ever purchased is undoubtedly this cover. Value for money has beyond my wildest hopes.I just utilized the Fast Case to shield my new Howa 1500 from the weather while going on a 4-day elk hunt in the Rockies. I covered my weapon and placed it on the front of my four-exposed wheeler's gun rack. In the mud and snow, I soaked through multiple layers of clothing every day. My arms would occasionally be covered in 3/4 inch of muck after a ride, but my gun was never wet. Although the cover was constantly caked in muck, the action, barrel, trigger system, and scope were never damaged. The stock surrounding the back sling swivel occasionally had mud on it, but considering the punishment I gave, I'm satisfied with that. This is something I would be willing to utilize on my wood-stocked weapons if I were entering a slightly more lenient environment.The case is made of plain polyester (maybe nylon?). At this price, I highly doubt it) lined with vinyl or another waterproof material and secured with elastics at the sides and base. I'm not sure how it managed to keep water out because the seams weren't taped, but it did. When hiking or taking the case off, the material is supple and not too noisy. With practice, it takes only about one second to remove. Simply pull up and back.There are only two potential drawbacks that I would mention to potential customers. One is that it is definitely not intended to prevent harm from impacts. You wouldn't want to use it for storage or travel because it isn't padded in any way. The second is that if you don't take off the cover as soon as you're back inside, you can wind up with condensation on the gun. Be cautious and take good care of your firearms, especially during sharp temperature changes, because keeping moisture out also means keeping some moisture in.Otherwise, I adore this item and intend to purchase more as required.I apologize for the photographs' strange colors. The gun shown is a Howa 1500 with a 22" barrel, Hogue stock, and 44mm GameKing scope for size and fit reference.
4.7/5
Ambidextrous holster and 3 front pockets lets you store and organize your pistol and shooting accessories
Clever internal and external design for true ambidextrous style
A low-profile tactical case with four quick-pull handles to allow for rapid weapon access using either hand in emergency situations
Padded divider, so you can safely carry more than one primary firearm
Ergonomic wide shoulder strap with reinforced padding allows for long lasting wear, while the well padded back support provides maximum comfort when on the move
$234
the fact that it safely houses my AR pistol and an extra upper (can easily hold 2 ARs)a small top pocket for my two handguns (HK VP9
4.6/5
Smallest AR-15 case available
Brushed Tricot with soft Scratch-resistant inner lining
Fits firearms up to 27"
Exterior size 29" x 9" x 2"; interior size 27.5" x 9" x 2"
Durable nylon, water-resistant outer shell with padded divider that protects gun parts and optics
$234
When disassembled, this 28" casing can house an 18" barbed LR-308 round. In the same way, I've had no trouble fitting 16" AR-15s.Two pleated, collapsible magazine pockets are included in the padded removable insert. The soft-side Velcro is used to close the top and bottom sections. If you want to hold the weapon in place, I highly advise investing in a roll of velcro stripping.One flaw in this design is that my LR308/SR25 Magpul magazines would not fit the two magazine pouches because they are intended for AR-15 magazines. The second is a shoulder strapless design.The top and bottom compartments' Velcro backing, however, allows you to attach a Velcro-backed magazine pouch or create your own lashing for larger magazines ( also available through Amazon.) You may store extra equipment by using the pleated magazine pouches, which can practically collapse flush with the insert. Three extra magazines, a small bipod, a tactical light, and a pen I use for breakdown were all able to fit.There are two sturdy metal zippers that seem high-quality.
4.6/5
Smallest AR-15 case available
Brushed Tricot with soft Scratch-resistant inner lining
Fits firearms up to 27"
Exterior size 29" x 9" x 2"; interior size 27.5" x 9" x 2"
Durable nylon, water-resistant outer shell with padded divider that protects gun parts and optics
$234
I purchased this soft gun case in preparation for a pending fishing trip with brown bears in Alaska. To hang my S
4.4/5
FEATURES: All Weather gun cases defend your firearms from damage and the elements. We've enhanced some of our best selling gun cases with an upgraded look and improved functionality in the AW2 line
MADE IN THE USA
They're still your old favorites just better. With rugged, industrial strength construction and a continuous Dri Loc seal, AW2 gun cases create a watertight and dust-proof shield that protects your gear even in the most extreme conditions
Interior specs: 43 x 13 x 5 inches, Exterior specs: 46 x 16 x 5.5 inches
PLANO GUN CASES: Protecting your passion since 1952
$234
Great value for the money; based on what I have seen on the range, this is very well constructed for the price; upgrading will cost you triple digits more. unfolds flat. casing made of thick fiber-plastic with formed ridging, strong latches, and lockable locations. A rubber gasket that is affixed to the case ensures water resistance. Foam is sturdy and simple to use ( slightly stuck together...thats normal) quite spacious (see pic...work in progress ...rifle is cut in and other stuff is prelim layout.) Tools needed: 20 pieces of 1x2" paper (to mark outlines before cutting), a very sharp 4" knife, very sharp scissors, quick-dry contact adhesive, and toothpicks to patch any miscuts that may occur. The cutting of the rifle took 40 minutes (three measurements, marking with paper pieces, and one cut). start with large pieces; the hardest aspect was sholder rest and grip. Despite all of this, I'm not sure if it will be waterproof as there are no end locks. (See related remarks)
4.4/5
‘Pluck to fit’ customisable foam inner
Pressure release valve
Easy glide wheels
Lockable Dual stage latches
Continuous, heavy duty Dri-lock Gasket protects airtight against the elements
$234
I have a TINY quibble with the "Double Scoped" claim, but let me first explain why I rated it FIVE stars.I purchased this case to safeguard a $2K match rifle, and wow does it work! The pluck foam is excellent for the job, and because it is so thick, I am sure that even as I drive around with it, the scope won't lose zero. The whole case weight shocked me, but the wheels and handles make it simple to carry. And the price is right on; I want to get another one to replace my Olympic rifle's decades-old gun bag.Here's the tiniest little bone. Although it says "Double Scoped," I am unable to get it to hold a scoped. 308 bolt with an added scope. M4 stock with a 308 AR-10. The case is split in half at the crucial location where another rifle would be placed by the bolt rifle's barrel length. Having said that, if both of the scoped AR-10 rifles had M4 stocks, I would be able to put them in this case.
4.4/5
Heavy-duty dual Density foam
Holds scent/cover spray, calls, binoculars and more!
Mossy Oak Break-Up Country Camo
Fits most rifles up to 48"
Designed for whitetail hunters
Heavy-duty construction
Lightweight
$234
This gun case is excellent. I succeeded in fitting a bolt action. A bi-pod fitted to a 308 with a scope on low rings just about fits. I'm not sure what some of the other reviews are referring to when they mention that the storage pockets flip open and other things because mine came with a zipper pocket like all other cases and was sewed to the case. Other than the one with the drawstring you can see in the photographs for a bottle or smell block, etc., all the other pockets velcro or zip close without any issues. You'll be happy if you buy it.
4.3/5
Quilted, non-absorbent liner
Includes choke tube slots
Lockable case
Fits most shotguns up to 52"
Heavy-duty Endura exterior with dual layer foam padding
$234
I paid only 18 dollars for this item, which is less than half of what my nearby gun store charges. The colour was off, but fortunately for me, I like the green and orange one better than the one shown. I see why some people worry that the liner is cheap and might rip easily, but mine has held up, and there is no reason it should rip as long as you open it all the way and set it in rather than slipping it in. It easily accommodates my over under, which has a 28" barrel. You can't top this pricing with the pockets and choke tube holders included.
4.1/5
Lifetime Warranty; Dimensions: 15" (L)x 2" (W); Weight: 0.7 lbs
Rugged water-resistant 1000 denier nylon
Great addition to the US Peace Keeper drag mat
Easily added to any product with properly located D-rings by slipping straps through D-rings
Available in black or OD green
$234
The straps arrived brand-new and in excellent shape. The bottom attachment loops are nicely secured with carabiners and metal D-rings, and the upper shoulder attachments are held in place with a hard plastic pull mechanism (similar to many backpack adjustment straps). They are considerably more comfortable and durable than the original pair that came with my Bonna bassoon case when I got them as replacement straps.
COPYRIGHT © 2019