Best 3D Printer Accessories in 2022

Last update: November 13, 2022

Can you 3D print a gun?

Can you 3D print meat?

Yes, you can 3D print meat, but it's not exactly the same as regular meat. 3D printed meat is made from a mixture of ground meat and fat, which is then extruded through a 3D printer. The end result is a meat product that has a similar texture to regular meat, but with a slightly different taste.

Can you 3D print sneakers?

Yes, you can 3D print sneakers. The process is called additive manufacturing, and it is an emerging technology that is being used to create a variety of products, including shoes. 3D printing offers a number of advantages over traditional manufacturing methods, including the ability to create complex shapes and designs that would be impossible to create using traditional methods. Additionally, 3D printing is much faster and less expensive than traditional methods, making it a viable option for mass production.

Can you drink out of PLA plastic?

PLA plastic is safe to drink out of, as it is made from natural materials like corn starch and is completely biodegradable. However, it is important to note that PLA plastic is not as durable as other types of plastic, so it is not ideal for long-term use.


Ewigkeit PTFE Teflon Tube with PC4-M6 Pneumatic Fitting and PC4-M10 Straight Quick in Fitting for 3D Printer 1.75mm Filament(Pack of 9cs) Review:


I haven't ordered any replacement Bowden tubes before, so I can't compare them to others, but they worked flawlessly and solved the one true issue folks had with their CR-10 Minis, which was that the OEM fittings were flimsy.I have faith in the general quality and intend to use it on a scratch build I'm undertaking.However, if you're reading reviews searching for a solution to the Mini's issues, you've just discovered the appropriate item.



AJSPOW 20PCS 3D Printer Nozzles | Upgrade Abrasion Resistant 0.4mm MK8 Nozzles | Brass 3D Printer Nozzle for 3D Printer Anet A8 Makerbot Creality CR-10 Ender 3 Review:


Every nozzle I've looked at appears to have been extremely carefully machined, with a nice, smooth bore. Compared to the stock nozzles that were included with my Ender 3, these seem to be of much higher quality.I purchased the set of different sizes so I could experiment with both little, finely detailed prints and larger, less intricate prints. The ones in between, though I doubt I'll use them frequently, are incredibly convenient to have on hand in case I run into a project that calls for a.3 or. 8 is acceptable.I will definitely buy more of these nozzles when the time comes because they are such a good deal.



3D Printer Nozzle Cleaning Kit - 0.4mm Needles and Tweezers Toolkit - Stainless Steel Nozzle Cleaning Tool Kit - Alternative for 0.4mm Drill Bits for 3D Printer - Set of 11 Review:


The extended reach angled tweezers were the major reason I bought this tool kit, and I'm generally happy with the quality of this instrument. I use it every time I start a fresh print job to reach beneath the print head and scrape away the first few strands of plastic ooze that leak out the nozzle as it heats up, but I haven't used it to clear out a clogged printer nozzle yet. For this function, the angled tip's extended reach is especially useful because it allows me to access a space that would otherwise be difficult to reach. The tweezers' points are extremely sharp and well positioned in relation to one another; as a whole, it's a high-quality tool.However, I did measure them with my high-precision calipers and every single one came out at exactly 0.40mm no matter where I measured, so I can state with confidence that the dimensional accuracy is good even if I haven't had to use the needles yet (since my nozzle hasn't blocked). The needles' flexibility and immediate ability to snap back into alignment also pleased me.



Premium 3D Print Removal Tool Kit - Durable 3D Printer Tools with Sturdy Comfort Grips, Sharp and Hardened Blades for Easy Separation of Prints, Knife and Spatula Set of 2 - Enhanced Version Review:


Since purchasing my Monoprice Maker Select Plus, I have experienced difficulty removing prints from the print bed without causing damage to the build surface. I am currently learning how to correctly tune my prints because I am quite new to 3D printing. I was utilizing the provided scrapper tool, but in my attempt to lever beneath structures and rafts, I seriously damaged my build sheet. Getting the print from the surface was still a slight problem point for me despite the two weeks of non-stop printing since those early initial prints. The last straw for me came last week when I managed to push my scraper through my palm on a large print that wouldn't budge (and I was being reckless with my off hand positioning).I searched the area for something better suitable for print removal and found this set. I reasoned that it wouldn't harm to test it for the price. I knew this would be a far better tool than the one I had been using as soon as I took the materials out of the container. The blade ends of both instruments have nearly flat shapes. The lengthier tool's edge is slightly beveled, allowing it to slide under a print and then pry to gain even more force. Since I purchased the set, I've been using the smaller tool the most. I can easily maneuver the blade under a corner or edge without damaging it thanks to the angle at which it is held by the handle. Since the tiny tool is only about.25mm thick, working underneath a print is made much easier. My scraper, in contrast, has a narrow edge that is.65mm thick. When I start to gain leverage on larger prints, I switch out the little tool so that I can actually work all the way under the print. has been flawless on the seven prints I've used it on so far. Both tools offer the perfect amount of rigidity and flex to complete the task at hand.Overall, really pleased with the equipment, and wished I had switched a week earlier to avoid stabbing myself!



Authentic Capricorn PTFE Bowden Tubing (1 Meter) XS Series for 1.75mm Filament with PTFE Teflon Tube Cutter and Upgraded PC4-M6 and PC4-M10 Pneumatic Fittings with Metal Teeth and Blue Collet Clip Review:


For more than a month, I've been using this tubing on my two printers, and it works great. It fits much more snugly than the basic bowden tubing that came with my Creality printers, which greatly reduces the risk of the filament bending while using enable retraction. Additionally, the cutter performs flawlessly, and any tubing sliding is no longer an issue thanks to the stainless steel fittings' metal teeth. The standard fittings are quite prone to malfunction; mine resulted in a massive filament clog between the hot end and the bowden tube. I won't experience that issue again because the upgrade portions have a lot more secure connection. It is safe to say that this should be used by everyone who operates a bowden style extruder. came shortly.



Smooth-On XTC-3D High Performance 3D Print Coating - 24oz. Unit Review:


Having done my study on what to anticipate, this coating more than met my standards. It's not a wonder substance, but when applied appropriately, it can significantly enhance the quality of your prints. It's comparatively simple to fully remove level striations from your finished product using XTC-3D, a little sanding, and a can of spray paint.It was applied to two ABS pieces.My personal experience leads me to advise carefully distributing this coating over and into any gaps or splits in flat ABS surfaces before sanding the surface down. Instead of using the provided foam brush to fill in small gaps, use a small, flat applicator like an old credit card.Applying the coating first and then doing some rough sanding afterwards will lessen your workload and still produce an excellent finish for ABS surfaces that are challenging to sand (small or have intricate curves).I haven't done this with PLA yet, but given how difficult it is to sand down the level ridges on that material, I would definitely utilize the "coat then sand" technique.Last but not least, a little bit of the coating goes a long way. One teaspoon of the mixture is more than enough if your component is simply a few inches on all sides. Apply a small amount of the coating in one spot, spread it out, and then add more as necessary. If you use too much, it will still properly harden, but you will lose surface detail.One more thing: According to the documentation that was included, the coating will harden to a functioning state in approximately 3.5 hours. After 12 hours, the coating could be handled but was still tacky because I applied it below the specified storage temperature. It took roughly a day for it to fully harden.



Creality Original Ultra-Flexible Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 pro 3D Printer 235X235MM Review:


This construction surface is amazing. It makes me laugh to recall the times when I played about with painters tape and other things. Take care of this surface (let it cool, don't bend it too sharply, use putty knives sparingly to prevent gouging, etc.) after you have it. and this will be your preferred printing surface, particularly for tall or thinly supported items. This surface would have been considered witchcraft five years ago! :0Pros:s .Removable—instantaneously swap to other surfacesExcellent adhesion—I hardly ever even wipe it. It simply stuck.Excellent for tall or thin items since it sticksLifting off the mat and gently bending the magnetic surface makes removal simple.It's very simple to install; just be sure to "align the magnet" because one direction will be stronger than the other. If you don't determine the alignment before connecting the metal plate, you risk making the same mistake I did and having to remove the extra lift tab. The additional build metal plate on the bed appears to somewhat even out Ender's distorted build plates.When the print is finished, you can remove the magnet because it cools quickly away from the bed.Sticks outperform PEI and alternative alternatives.Cons: If you need to replace it, they don't seem to sell just the magnet surface. As far as I can see, you must get the entire set; nevertheless, I would love to purchase a few spares separately. Take my cash!Mat does give the foundation layers some "texture."Glass and hairspray are still the best for smooth beginning layers if that surface is necessary. Great for some prints.If you are removing prints with sharp corners quickly, you risk denting or tearing the surface. It will likely be easier if you don't wait for it to cool down a bit (but you can just remove the magnet and it cools super fast)



Upgrade 3D Printer Parts MK8 Extruder Aluminum Alloy Block Bowden Extruder 1.75mm Filament for Creality 3D Ender 3,CR-7,CR-8, CR-10, CR-10S, CR-10 S4, and CR-10 S5 Review:


My factory parts broke, so I decided to upgrade, and I'm amazed at how much better my prints started to look. They were adjusted to a Creality Ender 3. Easy to install and a perfect fit. It's not difficult to figure out how to set them up, even though they didn't come with any directions or diagrams. Additionally, several other kind reviewers shared their images, which made it easier. Only two things bother me, which is why I docked a star. One, there are no simple instructions for assembly. Two, one of the ones I ordered needed a small amount of drilling to make it function properly. This was not difficult for me, but it shouldn't have required any modifications to make it function properly.All in all, a wise investment.



SIQUK 2 Pcs PTFE Teflon Tube (2M) 4 Pcs PC4-M6 Quick Fitting 4 Pcs PC4-M10 Straight Pneumatic Fitting Push to Connect for 3D Printer 1.75mm Filament Review:


I bought this set after seeing it recommended by a YouTuber who was talking about clearing up hot end clogs and troubleshooting fitment problems. On my Ender-3 3D printer, the bowden tube and hot-end quick fitting perform admirably.The quick fitting for the hot end heat sink has been rock strong, and I actually found this tubing to be much easier to slide into the hot end than the pricey Capricorn tubing people adore. The bigger threaded black-capped fitting is a great replacement for the stock fitting, but I haven't tried the blue-capped quick fitting.The tubing in the bundle is sufficient for at least 4 Ender-3 printers, and possibly more.



Glass Print Bed Borosilicate Glass 3D Printer Glass Print Bed 235x235x3.7mm for Ender 3 DC-01 Glass Print Bed Borosilicate Glass Review:


Before I put this glass on my printer, I had adhesion issues. The only time you'll need to touch it after you've leveled it is to clear the glass sometimes if your fingers erroneously leave fingerprints on it. I clean it with "Denatured Alcohol" with a paper towel. With a dry paper towel, make sure to wipe it completely clean, leaving no residue. If you get the leveling right now, your PLA filament should now attach to the glass without any issues. Use a sheet of typing paper to measure and level the table beneath the printing nozzle after preheating the nozzle and printer bed to the temperature at which you intend to print. Every corner of the table should be adjusted such that there is a little vibrating drag that doesn't catch the paper. You'll know the paper is level when you move it back and forth beneath the nozzle at each corner and experience a very slight vibration. Make sure to inspect and modify each corner two or three more times until they all feel the same. It will end your adhesion problems. Good fortune!


Does PLA degrade over time?

PLA, or polylactic acid, is a type of plastic made from cornstarch or other plant materials. PLA is biodegradable, meaning it will eventually break down and return to the earth. However, PLA does not degrade quickly. It can take months or even years for PLA to decompose.

How do you store PLA filaments?

To store your PLA filaments, you will need an airtight container. We recommend using a zip-lock bag with all the air squeezed out, or a vacuum-sealed bag. If you're using a zip-lock bag, you can store the PLA filament in the fridge or freezer.

How long do resin prints last?

3D prints made with resin can last a long time, provided they are cared for properly. Resin prints are more delicate than those made with other materials, so they require a bit more care. But if you take the time to protect your resin prints, they can last for years. To extend the life of your resin prints, it’s important to keep them out of direct sunlight. Ultraviolet light can break down the chemical bonds in the resin, causing the print to degrade over time. If you must display your resin prints in a sunny room, consider using UV

Is 3D printed food healthy?

3D printed food is a new and upcoming technology with the potential to change the way we think about food. With the ability to print food in any shape or form, the potential for new and innovative recipes is endless. But is 3D printed food healthy? The jury is still out on whether or not 3D printed food is healthy. Some argue that because the food is printed layer by layer, it could potentially be healthier than traditional methods of cooking. Others argue that because the food is not cooked in the traditional way, the nutrients could be lost in the printing process.

Is 3D printing profitable?

3D printing technology is still in its early developmental stages and has not yet been perfected. The technology is also expensive, which can make it difficult for businesses to justify the cost. Despite these challenges, there are ways that businesses can use 3D printing technology to generate revenue and create a profit. One way to do this is to offer 3D printing services to customers. This could include creating custom prototypes or parts, or even printing entire products on demand. There are already a number of businesses that are doing this successfully. Another way to generate revenue from 3D printing is

Is getting a 3D printer worth it?

3D printers are becoming increasingly popular, but are they worth the investment? Here are some things to consider before buying a 3D printer. Cost: 3D printers can range in price from a few hundred dollars to several thousand. If you are only interested in printing simple objects, a cheaper model may be sufficient. However, if you want to print more complex objects or higher-quality prints, you will need to spend more. Ease of use: 3D printers can be tricky to set up and use. If you are not comfortable with technology, you may want